Download User's Manual
Transcript
RGPS-7244GP / RGPS-7244GP-P User’s Manual "kbps", and it is restricted to 1-1000 when the "Policer Unit" is "Mbps" Policer Unit Shaper Enabled Configure the unit of measure for the port policer rate as kbps or Mbps. The default value is "kbps". Enable or disable the port shaper. The default value is "Disabled". Configure the rate for the port shaper. The default value is "500". Shaper Rate This value is restricted to 500-1000000 when the "Policer Unit" is "kbps", and it is restricted to 1-1000 when the "Policer Unit" is "Mbps" Shaper Unit Configure the unit of measure for the port shaper rate as kbps or Mbps. The default value is "kbps". Click to save changes. Click to undo any changes made locally and revert to previously saved values. 4.1.4.3 Port Trunk 4.1.4.3.1 Trunk Configuration This page is used to configure the Aggregation hash mode and the aggregation group. Label Description Source MAC Address The Source MAC address can be used to calculate the destination port for the frame. Check to enable the use of the Source MAC address, or uncheck to disable. By default, Source MAC Address is enabled. Destination MAC The Destination MAC Address can be used to calculate the Address destination port for the frame. Check to enable the use of the Destination MAC Address, or uncheck to disable. By default, Destination MAC Address is disabled. IP Address The IP address can be used to calculate the destination port for ORing Industrial Networking Corp 30