Download User Manual - basICColor GmbH

Transcript
basICColor CMYKick 2
because it simply works!
7.2.1 Proofing from Photoshop
In addition to the direct output to the printer using all its colors
(full-gamut-print) it is possible to simulate the output of a different
printing system (like an offset printing press) on your printer. This is
called “Proof”. By choosing a “Proof”-ICC-profile under “Source Space”
you can define the simulation color space.
This is a cheap way to create a proof. But even when the print
shows the correct color you can not be sure that it is contractproof-quality. Additionally some important information is missing
(e.g. control strip, profile information) to be a real proof-print.
You can create with the print
dialog “Print with Preview...” proof
like prints.
The prints might show the entire gamut of a printing press. But
without a control strip (for quality control) and all the other information you can not proof this. It’s not a contract proof, even if the
color output is correct.
But for the semi-professional or for internal use this method
can be good enough and might be an alternative to a Proof-RIPsystem.
62