Download DVR User Manual
Transcript
HD-TVI DVR User Manual 6 Manage DVR 6.1 Check System Information Check system information includes seven submenus: system, event, log, network, online user, record and QRCODE. 6.1.1 System Information In this interface, you can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event Information In this interface, you can search for events like motion and video loss. The utility provides an interface to have a date based and a channel based search. This report can further be saved on a USB flash drive as an html file using the export button. 6.1.3 Log Information In this interface, you can search for relevant logs as per set date and event which includes Operation, Setup, Playback, Backup, Search, Check Information and Error. This report can further be saved on a USB flash drive as an html file using the export button. 6.1.4 Network Information In this interface, you can check relevant parameters of network. 6.1.5 Online Information In this interface, you can check the details of the connected online users. Refresh: Refresh the current interface. Disconnect: Disconnect the online users to access DVR. If this function is used by the admin, the particular PC will not be able to access the device for five minutes. 6.1.6 Record Information In this interface, a user can check resolution, ftp and record status including motion recording, manual recording or schedule recording. 6.1.7 QRCODE User can quickly access the mobile client by scanning QRCODE. Go to Main menuInformationQRCODE tab. Refer to Fig 6-1: 38