Download IPMS-EVK-UHF RFID-Reader

IPMS-EVK-UHF
RFID-Reader-Software User Guide
1
Introduction
1.1
Abstract
Fraunhofer IPMS has developed a battery-less and wireless sensor system that is based on an
UHF RFID transponder. The transponder includes an internal temperature sensor and a
programmable microcontroller and is able to interface several external sensors. Using the
standard ISO 18000-6c / EPC C1G2 RFID protocol this system can be operated. This
document describes a GUI for simple measurements using commercial RFID readers.
1.2
Table of Contents
1
1.1
1.2
1.3
1.4
Introduction .................................................................................................... 2
Abstract ............................................................................................................ 2
Table of Contents ............................................................................................. 2
Minimum Requirements ................................................................................... 2
Contact.............................................................................................................. 3
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
Content ............................................................................................................ 4
Overview .......................................................................................................... 4
Quick Start ........................................................................................................ 4
Reader Connection Interface ............................................................................ 5
Reader Settings ................................................................................................. 7
Inventories ........................................................................................................ 7
Tag and sensor configuration ........................................................................... 8
Measuring ......................................................................................................... 9
3
References ....................................................................................................... 10
1.3
Minimum Requirements
IPMS_EVK_UHF reader software revision 74
Operating System: Microsoft Windows 7; with dot NET 2.0 installed
USB or TCP/LAN for the connection to the RFID-reader
Necessary files to support special RFID-readers and features are:
•
•
•
•
•
MetraTec Pulsar MX:
extra files are not required
Deister RFID-readers:
deBus.dll (v1.4.9.0)
Impinj SpeedwayR 420:
Impinj.OctaneSdk.dll (v2.0.0.5);
LLRP.dll (v10.16.0.240); LLRP.Impinj.dll (v10.16.0.240)
SkyeTek Supernova:
stapiclr.dll (v2.0.0.111)
ZedGraph chart readouts:
ZedGraph.dll (v4.5.9.41518)
Date: 2015/07/17
Seite 2 von 10