Download LPEX Editor User's Guide

Note: The width for the messageline parameter is fixed, so you cannot use
the scroll bar to display any text which is not in view. You must open the
Macro Log to view the text.
Examples
1. To set the messageline off, type:
set messageline off
2. To control message line display with the value defined by the default
parameter, type:
set messageline default
3. To query the value of the messageline parameter, type:
query messageline
If this query returns DEFAULT, type the following:
query default.messageline
API Return Code
-2 The option specified with the parameter was not valid.
“default Parameter” on page 195
messages Parameter
Enables the display of messages.
Scope: Global
Syntax
query messages
set messages { on | off | inverse }
Options
on
off
inverse
Messages are displayed in the information area and are logged in the
Editor window macro log.
All messages are suppressed.
Toggle between on and off.
Description
Messages are displayed in the information area when the messages parameter
is set to on.
274
LPEX Editor User’s Guide