Download User's Guide

RIGOL
6 To Make Measurements
All Measurement
All measurement could measure all the time and voltage parameters (each
measurement source has 18 items, measurements can be performed on the four
measurement sources at the same time) of the current measurement source and
display the results atthe screen. Press Measure  All Measure to enable or
disable the all measurement function. Press All Measure Source and use
to
select the channel(s) to be measured (CH1 to CH4).


When all measurement is enabled, “One-key” measurement is also valid.
“Clear” will not clear all the measurement results.
All Measurement
One-key
Measurement
6-24
DS4000 User’s Guide