Download User's Guide

RIGOL
13 System Function Setting
nnn is from 0 to 223 (except 127) and the ranges of the other three nnn are
from 0 to 255. You are recommended to ask your network administrator for an
IP address available.
Press IP Address and use
to input the desired IP address. This setting will
be saved in the non-volatile memory and if DHCP and Auto IP are set to “Off”,
the oscilloscope will load the preset IP address automatically at the next
power-on.
2.
Set the Subnet Mask.
The format of the subnet mask is nnn.nnn.nnn.nnn; wherein, the range of the
nnn is from 0 to 255. You are recommended to ask your network administrator
for a subnet mask available.
Press Mask and use
to input the desired subnet mask. This setting will be
saved in the non-volatile memory and if DHCP and Auto IP are set to “Off”, the
oscilloscope will load the preset subnet mask automatically at the next
power-on.
Set the Gate
You can set this paramter In Auto IP and Static IP mode.
The format of the gate is nnn.nnn.nnn.nnn; wherein, the range of the first nnn is
from 0 to 223 (except 127) and the ranges of the other three nnn are from 0 to 255.
You are recommended to ask your network administrator for a gate address
available.
Press Gate and use
to input the desired gate address. This setting will be saved
in the non-volatile memory and if DHCP and Auto IP are set to “Off”, the
oscilloscope will load the preset gate address automatically at the next power-on.
Set the Domain Name Server
You can set this paramter In Auto IP and Static IP mode.
The address format of the domain name server is nnn.nnn.nnn.nnn; wherein, the
13-4
DS4000 User’s Guide