Download Operating instructions

EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V → ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
3.3.2 Configuration menu (HTML page)
After successful registration the configuration menu is displayed. It is divided into the two following sections:
System | Modules | Output | Streaming | Status.
The menus are are arranged as tabs on the left. By clicking at the tab you will skip in the associated menus. These menus are subdivided and sub-menus are arranged above as registers. By pressing at these you can switch from one to the other sub-menus.
In each menu a „Help“ button in the lower part of the user interface leads into a separate bilingual „help“ window (German / English).
The button „Save to device“ sets and saves the done settings on the device. „Load from device“ fetches the on the device saved data
into the web interface.
Anything pre-set under “Factory Setting” is typed with an underline.
Fig. 6: Web interface, start page of the configuration menu
3.3.2.1 Menu “System”
Here you configure the system parameters of the device. „System“ is structured as the following:
EtherNet | General | SysParam | Maintenance.
3.3.2.1.1 System | Ethernet
Fig. 7: Settings for the Ethernet network interface
10