Download Siemens 7 User's Manual

s
Multiplexer Driver Developer’s Guide
7.4 Data Transfer
7.4.2
Block Flow Diagram for Data Sent to the Module via Virtual Port
Send Request Flow of a virtual Channel with
scanning of Break Signal '+++'
only the schema
WrSendRequest()
ReadIntervalTime=0
TotalTIme=0
ScanFlags=0
PlusNb=0
TimeStamp=ActualTimerTick
DlistInsertHead
SerMuxSend()
end
Figure 7: Block flow diagram for data sent to the module via a virtual port
Mux_Drv_DevGuide_v07
Confidential / Released
Page 31 of 36
2006-9-27