1
Download RAD Data comm E1 User's Manual
Transcript
RIC-E1 Installation and Operation Manual Appendix D IR-IP Interface Module IR_IP <IR-IP> S/W Ver. 1.21 31/IR (date) Quick Setup Management Access Advanced Setup ..................................................................... Device identification Interface Parameters Protocol Parameters Multicast IP ===================================================================== 1. Multicast forwarding :[ Disable ] 2. Static groups :>>> Press one of the numbers to select or ESC: Figure D-17. Multicast IP Menu Multicast Forwarding Used to control the forwarding of IP multicast frames. The following selections are available: D-22 • DISABLED – Disables multicast forwarding in both directions. • LAN to WAN – Enables forwarding of IP multicast frames addressed to groups appearing in the Static Multicast Groups table, from the LAN to the WAN. • WAN to LAN – Enables forwarding of IP multicast frames addressed to groups appearing in the Static Multicast Groups table, from the WAN to the LAN. • BIDIRECTIONAL – Enables forwarding of IP multicast frames addressed to groups appearing in the Static Multicast Groups table, in both directions. • WAN to LAN + IGMP – Enables forwarding of IP multicast frames addressed to groups appearing in the Static Multicast Groups table, from the WAN to the LAN. In addition, more groups can be added dynamically (the additional can be viewed using the View menu – Figure D-22). • TRANSPARENT – All the IP multicast frames are forwarded, irrespective of the Static Multicast Groups table. Advanced Setup Menu Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com
