1
Download Quantum PX502 User's Guide
Transcript
Appendix C Installing the PX502 Library Installing the Library 1 Verify that: • Power cables are firmly in place • All doors are closed 2 Turn on the power switch located in the lower left-hand corner of the OCP (see figure 118). Figure 118 Turning On the Library OCP Power button During the power up sequence, the library performs an inventory. The power up sequence can take several minutes. Setting the Library Options 3 To set the library options: 1 Press Setup from the Home screen. The OCP displays the Setup screen (see figure 119): Quantum PX500 Series User’s Guide 222
