Download Polycom 1.4.x User's Manual
Transcript
Administrator Guide - SoundPoint® IP / SoundStation® IP Features 3.1.17 Local Digit Map The phone has a local digit map feature to automate the setup phase of number-only calls. When properly configured, this feature eliminates the need for using the Send soft key when making outgoing calls. Instead, as soon as a digit pattern matching the digit map is found, the call setup process will complete automatically. This feature is similar to the digit map feature of the Media Gateway Control Protocol (MGCP) and the configuration syntax is the same as that specified in 2.1.5 of RFC 3435. The phone behavior when the user dials digits that do not match the digit map is configurable. It is also possible to strip a trailing # from the digits sent. Configuration file: sip.cfg Specify impossible match behavior, trailing # behavior, digit map matching strings, and time out value. • Central (boot server) Configuration file: phone1.cfg Specify per-registration impossible match behavior, trailing # behavior, digit map matching strings, and time out values that override those in sip.cfg. • Web Server (if enabled) For more information, see 4.6.2.1.3.5 Conference Setup <conference/> on page 118. For more information, see 4.6.3.4 Dial Plan <dialplan/> on page 126. Specify digit map matching strings and time out value. Navigate to: http://<phoneIPAddress>/appConf.htm#ls Changes are saved to local flash and backed up to <Ethernet address>-phone.cfg on the boot server. Changes will permanently override global settings unless deleted via the Reset User Settings menu selection. Local Local Phone User Interface None. 3.1.18 Microphone Mute A microphone mute feature is provided. When activated, visual feedback is provided. This is a local function and cannot be overridden by the network. 3.1.19 Multiple Call Appearances The phone supports multiple concurrent calls. The hold feature can be used to pause activity on one call and switch to another call. When active on one call, an additional incoming call is presented using the familiar “call waiting” style. Soft keys with call disposition options are presented to the user. The current user interface is limited to 30 Copyright © 2004 Polycom, Inc.