Download Nextar MA206 User's Manual

MA206 | Digital MP3 Player
Instruction Manual
Table of Contents
1. Locating the controls.......................................................................................2
2. Basic operation............................................................................................... 3
3. Operating buttons........................................................................................... 7
4. Play music..................................................................................................... 9
5. Voice recording.............................................................................................. 13
6. Playing recorder files..................................................................................... 16
7. Jpeg album viewing....................................................................................... 18
8. Telephone book............................................................................................. 20
9. E-book........................................................................................................... 21
10. Video playback............................................................................................ 23
11. System settings........................................................................................... 24
12. Using the player as a USB disk.................................................................. 28
13. Upgrading the firmware...............................................................................29
14. Other settings..............................................................................................31
15. Trouble shooting..........................................................................................39
16. Specifications..............................................................................................39
17. AMV converting tool....................................................................................40
Thank you for your purchase
*
*
*
Features Overview
Please read this manual carefully before
using your new player.
Contents in this manual may change at
any time without notice
If the actual operations of your player
does not appear to be the same as
the instructions in this manual, please
visit www.Nextar.com for updated
instructions or notices
•
•
•
•
Introduction
This MP3 player is part of a brand new generation
of portable digital music devices, supporting
MP3/WAV music formats, AMV format play,
JPEG photograph support and E-book text
reading .All of this is part of a high-quality, easy
to use design. Thank you for selecting a Nextar
MP3 player!
•
Unique design that is comfortable to
hold and easy to use
Multi-Code Support: This unit can
support and play MP1, MP2, MP3,
WMA, WMV, ASF and WAV Music
formats
Firmware
Upgradeable:The
latest
firmware updates can be downloaded
from the Nextar website to keep your
unit up to date
Removable Disk: Manipulate files via
the "mobile disk" in "My PC" without
any additional programs on your PC
(drive program needs to be installed
for operating systems prior to Windows
2000). Use this unit as a removable
drive, storing files, music or anything
you want (drivers required for operating
systems prior to Windows 2000)
Private Space Disk Mode: With the
utility included on the software CD, you
can partition the memory of this unit into
2 or more separate drives and encrypt
these partitions to keep others from
accessing your files and information.
•
•
•
•
•
1. Locating the Controls
Record/ Replay: The player supports
recording
through
the
built-in
microphone and saves the files as WAV
or ACT formats.
7 Preset EQ settings: Normal, Rock,
Pop, Classic, Soft, Jazz and DBB
Multi-play Mode: Normal, Repeat One,
Folder, Repeat Folder, Repeat All,
Random, Intro.
Auto Power Off and Sleep Timer: You
may set the Sleep Timer or Auto Power
Off mode for convenience or to save
battery power.
GUI (Graphic User Interface) Menu:
Easy to read, icon based display
makes navigation and operation simple
Important Notices
Appearance & Buttons
v
LCD Display
Battery Indicator:
The player has a 9-level battery monitoring
system.
Indicates that the battery is currently
fully charged
Indicates low battery power and the
battery should be charged
Fast forward or fast reverse when
playing
this does not work when playing AMV files
Entering Different Modes
You may enter different modes from the
main menu.
2. Basic Operation
Entering The Menus
Press MODE button to enter the menus,
including main menu, (press and hold MODE
button at Stop state), Submenu at Play state
(press to enter) and submenu at stop state
(press to enter).
Main menu:
(Press and hold MODE button to enter)
Music mode:
Browsing
To browse music files or menu options:
Record mode:
System setting:
Voice mode:
USB mode:
JPEG Album:
*
E-book:
Note: press and hold Mode button to
return to the main menu from these
submenus. when connecting the USB
cable to your PC, the unit will enter
USB mode.
Volume Control
When playing, from the main interface of the
Music mode, Voice mode , press and hold
the V+ or V-buttons to adjust volume.
*
*
2. Manual Power ON/OFF
* when the player is OFF, press and hold
the Play button to turn the unit on
* when the player ON, press and hold the
Play button to turn the unit OFF
Volume cannot be adjusted when
playing AMV files
Power On/Off
1. Turn on automatically
*
When connecting the USB cable to your
PC, the player will turn on automatically
and will enter the USB mode
After pushing the Power button (OFF/
ON), the player will turn on automatically
and enter power -on logo interface:
Lock Function (HOLD)
When Hold is ON, the following will be
displayed:
*
*
When HOLD is on, all buttons will be
locked from operating (i.e.: buttons and
controls are locked).
HOLD also functions as the “Write
Protection”, preventing data from
being written to the unit via the USB
connection.
Play& Stop (and Pause when recording)
Record/Pause (press and release), Stop
Recording (press and hold)
*
Note: You may press the Play button to
exit from any menu or option interface
3. Operating buttons
For Music mode and Voice modes:
Buttons
PLAY
MODE
Operation
Press and
hold
Press
Press and
hold
Press


V+
VREC/A-B
REPEAT
Press
Press and
hold
Press
Press and
hold
Press
Press and
hold
Press
Press and
hold
Press
Press and
hold
Press and
hold/press
Stop Status
Play Status
Play Submenu
Stop Submenu
Power off
Power off
Power off
Power off
Play
Stop
Exit the menu
Exit the menu
Enter main menu
Enter main menu
Enter Play submenu
Next song
Continuous
forward browse
Previous song
Play next song
Backward browse
Volume increases
one step
Volume increases
Decreases volume
one step
Decreases volume
Fast backward
Volume increases
one step
Volume increases
Decreases volume
one step
Decreases volume
Enter main menu
Confirm current
option or enter
next submenu
Switch submenu
Continuous
forward
Switch submenu
Continuous
backward
X
Enter main menu
Enter Stop
submenu
X
X
X
X
X
X
Start recording
Enter A-B replay mode X
X
Start recording
Enter A-B replay mode X
Enter to select repeat X
mode interface
X
X
Fast forward
Play previous song
Confirm current option
or enter next submenu
Switch submenu
Continuous forward
Switch submenu
Continuous backward
X
X
For Record Mode:
Operation
PLAY
MODE
REC/A-B
Action
Stop Status
Record Status
Press and hold
Turn off
Stop recording
Press
Start recording
Pause recording
Press and hold
Enter main menu
X
Press
Enter Record submenu
X
Press
Start recording
Pause recording
press and hold
Start recording
Stop recording
4. Play Music
1). Connect player to PC, after 10 seconds
a dialog will be appear, select "Take no
action" or click "Cancel" button to continue.
2). Open "My Computer", clean up
the device as the following steps:
How to play DRM music
System Requirement:
* Windows XP+SP2;
* Windows Media Player 10.3646
or above (New install do not
upgrade from old version);
Although you can copy music files from
somewhere, you can't get the DRM license.
Only Windows XP support MTP(Media
Transfer Protocol).
You can setup the player as a
U-disk or MTP device.
How to add DRM music
a). Click the MTP device icon use
the right button of the mouse,
and then select "Format";
b). Waiting for the format
processing until finish.
3). Run "WMP10"(Windows Media Player
10), the "MTP" device will be discovered.
Select "Sync",and then open the local folder
where your music files saved.
Browser "My Computer", you can see
the files already downloaded to player.
4). Select all music you want tosync to
player, and drag them to the"SyncList"
on the left side of WMP 10, click"Start
Sync" to begin downloading:
6). Disconnect the player, it will
make ID3 Playlist automatic, this
will cost about 8 seconds.
5). When finish downloading, you can see
the music files on the right side of WMP 10.
7). Then the player will process DRM
licence, it will cost 5~10 seconds.
10
How to play
4. Press MODE button to enter the Music
mode
At first, you must enter into System
setup and set up the "DRM Time", set
it to current time, otherwise the DRM
music can't beplayed accurately.
After setting up "DRM Time", you can go
back to music mode to play and listen to
music.
5. Choose music
Basic Operation
1. Connect the earphones as shown below.
2. Press and hold PLAY button to power on
 button: To choose previous music or
 button: To choose next music or
AMV.
AMV.
6. Volume control
V- button: To decrease volume.
V+ button: To increase volume
3. Enter the main menu
11
EQUALIZER Mode
1.When playing music
Equalizer options corresponding icons list
as below:
2.Press the MODE button to enter Play
Submenu
3.Press  button to choose Equalizer menu
option
5.Press  button to switch EQ settings, and
press MODE button to confirm selection
Lyric Display
This player supports “*.LRC” LRC (lyric files
(users can download files from internet),
and lyrics will be displayed while the music
is playing (like Karaoke)
4.Press the MODE button to enter EQ mode
selection Menu.
12
How to use lyric files?
Save the lyric file with the same name as
that of the corresponding music file. For
example:
3. Press MODE button to return to Music
play mode.
Music file name: GiGi-Sky.mp3
Lyric file name: GiGi-Sky.mp3.
How to know whether the lyric files
exist?
If the current song has matching lyric files,
the lyric sign will be displayed at the right
bottom of the display in music mode.
5. Voice Recording
1. If the current song has matching lyric
files
Note: Voice recording uses significant
battery power. Make sure your battery is
fully charged
This player can save up to 99 voice files per
directory
Instant Recording
Press REC button to start immediate
recording from any player mode (other than
if playing music or recording via the line-in)
2. Press and hold MODE to enter the Lyric
interface when playing.
13
1. Start recording.
2. Pause recording. (Time icon flickers)
2. Press  button to choose recording mode.
3. Continue recording.
3. Press MODE button to enter Record
mode
4. Stop recording.
4. Press Play button to start recording.
Recording in Record Mode
1.Enter the main menu.
5. Other operations are the same as those of
“Instant Recording” except that Play instead
of REC should be pressed.
14
NOTE: The recorded file is saved in the
current folder set in “Recording Stop
submenu/ /Local Folder”
*
*
*
If “Overflow” is displayed on the LCD,
the player”™s memory is full. Please
delete other files to make space
available.
If “over record” is displayed on the
LCD, the current directory has already
had 99 recording files. Please switch to
another directory.
Only Play and REC/A-B buttons function
while recording
3.Press  button to select “REC type”
option
4.press MODE
submenu:
Select Recording Type
1. At the record mode stop interfaces
2.Press Mode button to enter record mode
submenu
15
button
to
enter
this
3. Press Mode button to enter Voice mode
interface
5. Press (button to select desired recording
type)
6. Press MODE to confirm the type
selected
7. Press PLAY button to start recording
Note: Voice Control means the player will
only record when it senses sound. When
silent, the unit will pause the recording
4. Press PLAY button to start playing.
*
6. Playing Recorded Files
1. Enter the main menu:
2. Press button to choose “Voice mode”
16
Converting ACT format files to WAV
format files The ACT file format can
save significant space when making
voice recordings. However this format
is not compatible with other playback
devices (like your PC). The ACT format
files can be converted to WAV format
files through the accessory installation
tools that are on the CD shipped with
this unit .
1. Run “Sound Convert Tool” program, and
click “Open” button.
*
Note: This tool can also convert from
WAV to MP3 file formats
7. JPEG Album Viewing
2. Choose the ACT format files needing
convert
This function supporting all JPEG formats
1. At the main menu
3. Click the “Convert”
converting
Press  button to choose “JPEG Album”
option:
button to start
17
View Album
1. At the picture be selected state:
2. press MODE button to select the desired
image if there are no pictures the display will
indicate “No files”
2. Press MODE button to enter picture
submenu
3. Press /V+ button to choose desired
picture, and then press Play button to
display the image:
3. Press  button to select the “play set“
option:
4. Press /V+/V-//V+ button to browse
picture in sequence (only suitable for
“Manual play”)
18
4. press MODE button to enter the interface
as follows
8. The unit will now automatically display all
pictures in the selected directly for the set
amount of time.
Note: when playing pictures, press and hold
MODE to fast exit from picture interface
and return to the main menu; at any menu
oroption interface, press Play button to exit
from picture interface.
8.TELePHONE BOOK
5. Press  button to choose “Manual play”
or “Auto play” options, and then press
MODE button to confirm.
First time, the user can find the file
‘Setup_enu_v1.1.exe’ in drive disc CD.
Then install this software on
the PC as following steps
6. When choosing the “play” option you will
see the following display:
7. press / button to adjust “Auto play”
speed (Unit: sec. press MODE button to
confirm
19
Select the file menu to choose the Input
Data to find the file (TelAddbk.dat) in your
mp3, and then press the open button.
Fill in team name in the blank and
press the Append Grouping button:
Connect the mp3 with the PC,
pressing the start menu to find
the Flary Address software:
Select the team you added, and then key
in the Name and the TEL you want to add.
Press the New Card button and you can
see the name and Tel No. in the right blank.
Select the file menu to choose the
new, and then you will find the file
‘C:\Program Files\Flary\TelAddbk.
dat’, then copy the file in your mp3
20
3. Press MODE button to enter text file be
selected, if there are no text files, the display
will show ”No files”
Add the whole information
as the above steps:
Press the Save button and Quit.
Disconnect the mp3 to PC.
Enter the main menu to select
Telephone mode and you will find
you added Tel information.
9.e-BOOK
This unit can read files in TXT format:
1. At the main menu
4. Press  button to select desired text file
to read, and then press Play button to enter
text interface
2. Press  button to choose “E-Book”
21
3. Press  button to choose “setting”:
5. Press / button to turn the pages in
sequence (only suitable for “Manual play”)
Reading setting
1. At the text file be selected menu
4. press MODE button enter the interface as
follows:
2. Press MODE button to enter submenu of
the selected text file
5. Press  button to choose “Manual play”
or “auto play” options, and then press
MODE button to confirm.
6. When “auto play” is chosen, the following
will be shown:
22
lutions are converted into one format theVBox is able to show. For further details,
take a look at the Windows help files.
Go to Music mode to playback
videos (p. 16, Playback music).
7. Press / button to adjust “auto play”
speed (how long each page is displayed
until it is turned to the next) (Unit: sec. press
MODE button to confirm.
Connecting external devices
The MP3 Player has a Line-ln input
where you can connect external devices
for voice recording. The recording
quality is max. 32K in WAV format.
Note: when playing text files or books,
press and hold MODE to fast exit from book
interface and return to the main menu; any
menu or option interface, press Play button
to exit from book interface
11. System Settings
System parameters can be set from this
menu. Please note that some of these
settings will change every time you upgrade
the system firmware:
10. Video playback
Video playback
The MP3 Player is able to display videos
in AMV format. You can create videos in
AMV format by using the Movie-Converter
tool shipped with the product.AVI, WMV,
ASF, RM, MPG, MPEG, MOV and VOB
are accepted as source les. By using the
converter the differing frequences and reso­
At the main menu,
23
Press MODE button to System Setting
interface is as follows:
Firmware
Upgrading
Special for firmware upgrading
Exit
Exit from current interface
“Record Time” Parameter Instructions:
1. System Setting Interface
Parameter Overview
Record time
Set the time and date when
recorded file are saved
LCD set
Set LCD backlight mode
to save power
Language
Set different languages
to be displayed
Power Off
Set a fixed time after which the
player will turn off automatically
Replay mode
Set Replay mode states
Online Mode
An option specially designed
for “Private Space” function
Memory info.
Show total memory capacity
and percentage used
3. Press V+ to set time using the format:
“YY-MM-DD” (Press V- to set in reverse
sequence)
Firmware
Version
Show firmware version
4.press / button to adjust numbers
2. Press Mode to enter Record Time
Interface
24
5. Press Mode button to confirm and exit the
current interface.
3. Press  button to choose, and press
MODE button to confirm and enter adjust
interface as follows (e.g.: Black):
“LCD set” Parameter Instructions:
The steps below allow you to set the LCD
backlight parameters:
1. At System Setting interface, press  key
to select “LCD set” option
4. Press / button to adjust time (Unit
second) and press MODE to confirm and
exit.
Brightness
Set light and shade contrast of OLCD
screen
2. Press Mode button to enter “LCD set”
submenu:
Darkle mode
Set fixed period of time (unit: second)
when no operation on keys, the player may
turn darkle screen automatically. If “0” is
selected, function is turned off.
Black mode
Set fixed period of time (unit: second) when
no operation on keys, the backlight will turn
25
off automatically. If “0” is selected, function
is turned off. 4. Press Mode to confirm to exit. Power Off
Operating steps are identical
Language setting steps.
“Language” setting
1. At System setting interface, press /
button to select “Language” icon:
to
the
Off Time mode refers to a period of time
(unit: second) at which the unit will turn it off
““ if not keys have been pressed while the
unit is in “Stop” mode (ie: not playing). If “0”
is selected, the function is turned off. Sleep
Timer refers to a period of time (unit: minute)
for the player to turn off automatically when
no keys are pressed, regardless of the
mode the unit is in. This includes even
when the player is playing music. This
function is specially designed for listening
to music before sleeping. Note: Setting of
Sleep Timer is valid only once and the set
time will be cleared after power off. To use
this function again, the Sleep Time must be
reset.
2. Press Mode button to enter “Language”
setting interface:
3. Press  or  button to select desired
language.
Simple Chinese, English, Trad Chinese
Replay Mode
Operating steps identical to the Equalizer
setting steps 26
Manual Replay means that in A-B Replay
Mode the endpoint B can be set manually
only.
Firmware Upgrade
This option is only for use in Firmware
upgrades
Auto Replay means that in A-B Replay Mode
the endpoint B can be set automatically. (this
is particularly useful for audio books)
12. Using The Player As A USB Disk
This player supports standard USB disk
functions with the following operating systems:
Windows98 (driver required), Windows 2K
and above (no driver required), Mac OS 10.3
and above and Linux 2.4.2 and above.
Online Mode
Operating steps identical to the Equalizer
setting steps Some operating systems (those
before Windows 2K SP4) cannot support
two drive letters assigned to one USB disk.
Thus, if the “Private Space” function is on,
choose which disk you are going to use, i.e.,
“single ordinary disk” or “single encrypted
disk” so that the correct drive will be shown
once the unit is connected to your PC. Memory Info
The number displayed represents total
memory capacity of the unit and the
percentage refers the capacity used.
This player supports power supply via USB.
This player also supports Suspend Mode.
How to connect to your PC:
Power on the player and plug the USB cable
into the player and your PC to enter USB
Mode. The player may display one of
three modes after connecting to your PC:
Firmware Version
Operating steps identical to Language
setting steps
27
13. Upgrading The Firmware
1. Waiting state
This player supports firmware upgrading and
maintenance via the special tools installed
on your PC from the installation CD. Enter
the main menu.
2. Downloading state
1. Press  button to select “System
Setting”
3.Uploading state
2. Press MODE button to enter System
Setting.
28
6. Run the “MP3 Player Update” program
that was installed on your PC from the
included installation CD, then click “Select
new firmware file” button. Your PC should
display a screen similar to this one:
3. Press  button to choose “Firmware
upgrade” option
4. Press MODE button to enter “firmware
upgrade” interface:
7. Choose new firmware program (It may be
on the included CD, or you can download
from www.Nextar.com)
5. Connect the player to your PC
29
8. Click “Start” button to begin the firmware
update process:
have a basic knowledge in computer operation.
Only install and upgrade firmware specific for
your unit. Do not use other firmware for other
Nextar units or from other manufacturers.
Doing so may result in you player not working
properly, or not working at all.
14. Other settings
Select Folders (At Stop Submenu)
Users can save files in different folders
(folders should be created on your PC in
advance), to manage and play files according
to different types. The player supports up to
99 subdirectories.
9. Once the upgrade is completed and
successful, the display should show:
1. At the Stop interface. (Current example is
in Music Mode, but folders can be selected
in Record mode, Voice Mode, JPEG Album
mode and E-book mode also.)
Notice: Firmware upgrade is an operation to
optimize the performance of the player.
In correct operation of firmware upgrading may
cause the player to work abnormally or not at
all. Please read this manual carefully before
attempting a firmware upgrade. Users should
30
Delete File (At Stop Submenu)
Files can be deleted from the corresponding
modes: Music Mode, Voice Mode .
2. Press MODE button to enter Stop
Submenu.
1.At the stop interface.
3. Press MODE button again to enter Select
Folder interface.
2.Press MODE
submenu
button
to
enter
stop
3. Press  buttons to choose “Delete”
option.
4. Press  or  buttons to choose folders.
5. Press MODE button to confirm the folders
selected. Note: The same folder name can
be given to folders in each of the above
modes. All are independent of the other.
4. Press MODE button to enter Delete file
folder
31
Note: “Delete All” means to delete all the
relevant files in current mode in current
folder. (For example, at Music Mode
executing “Delete All” , all the music files
in current folder may be deleted, while files
stored under the other modes will not be
deleted.)
Note: When deleting files on your PC, please
take care to” Safely Remove” the player
before pulling out USB cable; otherwise files
may not be deleted.
5. Press MODE button to enter Delete file
folder submenu
Play Mode (Play Submenu)
Press REPEAT button to enter the directly.
6. Press  button to choose “Delete” or
“Delete all” .
Enter Play Submenu to enter.
When playing music and recorded files,
different play modes can be selected. (such
as Repeat, shuffle, etc.) The first option
in the Play Submenu is Play Mode. The
player will play files according to the mode
selected.
7. Press MODE button to confirm and
deletion starts.
32
2. Press MODE button to enter Play
Submenu is as follows:
3. Press  button to choose Tempo Rate
option
Tempo Rate (Play Submenu)
When playing music (MP3 format only) or
recorded files, different tempo rates can be
set (faster or slower) without changing the
pitch of the sound files
4. Press MODE button to enter Tempo Rate
interface is as follows:
1. When playing music
5.Press  button to quicken tempo and
press  button to slow down tempo.
33
Replay Mode
Press REC/A-B button to enter the mode
directly.
4. Press Mode to enter Replay.
Enter Play Submenu to enter.
Replay Mode Submenus: A-B Replay
: “A” flashes in Replay Mode icon
start point is to be set.
1. At Music Mode or Voice Mode
and
5. Press  to set “A” start point.
2. Press Mode to enter Play Submenu.
After “A” is set, “B” flashes in icon
endpoint B is to be set.
6. Press  to set “B” endpoint.
3. Press  to select “Replay” .
34
, and
Replay icon
stops flashing and A-B
segment replay begins. When replay times
count up to times set in advance, the player
will quit the Replay Mode.
Comparison (This function does not exist
in Voice Mode)
1. Replay icon changes to and the recorded
sound of users is played.
At Replay Mode, pressing  can set “A”
again to select another segment. (Setting of
replay times refers to “Replay Times” in the
previous section.
2. After playing the recorded sound, the icon
changes to, and original sound is played
3. After playing the original sound, the
recorded sound is played again. The whole
procedure will continue (without limitation by
Replay Times) until press Mode to exit.
Follow Read (This function does not exist
in Voice Mode)
1. Replaying A-B segment, Press ( to enter
Follow Read Mode.
In this mode, pressing ( will return to Follow
Read Mode.
2. Replay icon changes to Follow Read
icon, and start recording sound of users is
recorded. The recording time is as long as
the A-B segments.
For the three modes above, pressing Mode
will exit from Replay Mode directly.
Replay Times (Play Submenu)
Operating steps identical to Backlight
setting steps. Replay times mean that after
A-B segment has been replayed up to fixed
number of times, it will exit from Replay
Mode.
3. After recording time, the icon changes
to , and the original sound is played. Press
(button to enter Comparison mode.
At this mode, pressing (button will return to
A-B Replay Mode.
35
Replay Gap (Play Submenu)
Operating steps identical to Backlight setting
steps. Replay gap adds a gap of silence
between each replay (unit: seconds).
his MP3. Now, the function of "dream space"
solves that problem. Using the included
utilities, users can separate the disk into
two partitions with optional proportions.
Two drives will show up on the computer
(Windows 2K needs SP4, or you will find
one disk only). Choose "single normal disk"
or "single encrypted disk" under "system
setup/online mode" and encrypt one of the
disks to hide the content. This data cannot
be viewed without a password. This is
"dream space".
Private Space Overview
Private Space function
Partition and Encryption Functions Some
users may have the need to hide information
on their unit from unauthorized access. This
is often the case when multiple users share
the unit. By allowing users to create
separate partitions on their unit, and then
encrypt those partitions, Nextar has solved
this problem.
1. Connect player to PC
2. Run the MP3 player disk tools
Users can divide USB disk into two partitions
(of any size) with tools provided with the
player. (again, note previous warnings that
you must have Windows 2K SP4 installed
to use the partition function. Otherwise
you must encrypt the entire drive). To use
“Dream Space” :
In the past, MP3 users who wanted others
to see his individual data could only delete
their privacy settings while friends borrowed
3. Format first, choose the "encrypt subarea"
option, choose appropriate content
4. Input username at "new username", input
password at "new password", input the
same password at "confirm password", click
"start" to begin the partitioning
5. Finish the partition and follow the prompts;
6. PC will ask to restart, press "Yes"
36
7. You will find two disks after rebooting (Win
2K SP3 and earlier will find one)
2. Run the MP3 Player Disk Tool, which is
available in the included CD and needs to
be installed on the user’s PC
8. There are three files in the encrypted, two
hidden files and an executable file
9. Run "RdiskDecrypt.exe", input username
and password in dialogue box
10. You must input user name and password
every time you connect it with a PC.
Attention: Data in disk will be erased
if you separate the disk into two sections,
please back up the data on the disk
beforehand. Uniting two disks into one disk
will also clean out the data.
3. First you will see format tools. Choose
“partition and encryption”, then choose
appropriate capacity for encrypted partition,
select “Set username and password” and
enter your user name and password. Input
user name in “new user name”. Input password
in “new password”, and then input the same
password in “new password” confirmation.
Click start to create the partition.
Warning: Do not lose your username
and password. You can only erase the
Encrypted disk by uniting partitions,
which will erase the files.
1. Connect the player to your PC.
37
will be three files, two of which are hidden
files, one of which is executable file, and
disk space is 300K (in the example below).
4. Once partitioning is complete, you will
see the following message:
8. Run executable file "RdiskDecrypt.exe" ,
input user name and password in dialogue
box. If correct, you can unencrypt the
partition (disk) and view/manipulate the files
on the drive
Notice: Save any data you have on the
disk prior to partitioning. Partitioning will
delete any files stored on the drive.
5. You will be asked to restart yourcomputer
Warning: Don’t lose your user name
and password, otherwise you will not able to
access the encrypted partition.
6. Two disks will be seen after re-starting (or
only one if using an OS prior to Windows 2K
SP4 version)
15. Trouble Shooting
No sound is heard from headphones.
• Check whether Volume is set to “0”
7. Double click the encrypted partition. There
38
•
•
•
Make sure headphone plug is secure.
Check whether the headphone plug is
dirty.
Corrupted/damaged MP3 files may
sound very poor, or not play at all.
Confirm that your file(s) are good (check
them on your PC)
•
•
•
•
•
Characters in OLED are illegible or
difficult to read
• Check whether the right language has
been selected.
Flash memory:64MB,128MB, 256M,
512MB,1GB,2GB
Max Play time: 5 hours
Operating
System
Compatibility:
Windows98/SE/ME/2K/XP, Mac OS 10,
Linux 2.4.2
Working temperature: -5°C to 40°C
Multilingual
Recording
• Sample rate: 8KHz
• Recording format: WAV, ACT, MP3
• Recording time: 35 hours (ACT,128M
Flash)
•
Formats: MP3, WMA, WMV,ASF
• Max output of headphone: L=10mW,
R=10mW, 32Ohm
Downloading of music files fails.
• Check whether USB cable is damaged;
confirm it is connected properly.
• Check whether drivers are installed
correctly (if required).
• Check whether the player’s memory is
full.
Music
• Music formats supported: MP1, MP2,
MP3, WMA, WMV, AMV,ASF, WAV
• MP3 bit rate: 8Kbps-320Kbps
• WMA, WMV, ASF bit rate: 5Kbps384Kbps
• Frequency response: 20Hz to 20KHz
• SNR: 85dB
16. Specifications
General
• PC connection: USB2.0 (FS) (Read: 1000K Byte, Write: 1000-900K Byte)
39
Conversion Instructions:
Step 1: Run the "Movie Convert Tool
"program to activate the tool. Your PC
should display the following:
Note: Product design and specification may
change at any time without notice.
17. AMV Converting Tool
Summarize
Because this player has a full color, highresolution screen, movies can be viewed on
it. The AMV Converting Tool can convert a
variety of common video file formats to the
AMV file format, which can play on this unit.
Video formats supported for converting are
as follows: AVI format files (*.avi), Windows
Media format files (*.Asf, *.wmv), MPEG1
format file (*.mpg, *.mpeg), Real play files
(*.rm), QuickTime format (*.mov), MPEG2
format (*.Vob)
Step 2: Click the indicated button to choose
the movie file you want to convert:
Note: This tool temporarily supports the AVI
RM format only‚
Important: Users must upgrade to
Windows Media Player 9.0 (or later) for
Windows98, Windows Me, Windows2000
and WindowsXP operating systems, (Win98
and Win 2000 may need install the Image
Accelerator Diver. Go to www. Nextar.com
for more info)
You should then see the following display:
40
In this screen select the type of file you are
converting from and then select the file from
the directory where your movie files are
stored> Click the "Open" button and the
display will return to the Movies Convert Tool
main interface. From the main screen, Click
"PLAY" button to play the selected video
Step 4: Click the button (as shown) to
choose file name and directory for your new
converted file:
Step 3:
Click the " Begin Convert" button to begin
the conversion process:
If your movie contains audio, go to the next
step. If you want to insert different audio,
Click on the "Insert new audio frequency
file" box. Then using the directory button
on the right, find the audio file you want to
insert See below:
Once conversion is complete and successful,
the following will be displayed:
41
No part of this manual may be copied, republished, reproduced, transmitted
or distributed in any way without prior written consent of Nextar, Inc. Any
unauthorized distribution of this manual is expressly forbidden.
"Nextar, a trademark of Nextar (Hong Kong) Limited (pending)."
Nextar may find it necessary to modify, amend or otherwise or update this manual.
We reserve the right to do this at any time, without any prior notice. All specifications
and features are subject to change without notice. All specifications and features
are subject to change without notice. All screen shots shown are sinulated and
may not represent the actual screen on production units sold to consumers.
For instruction manuals, updated drivers or other
information, be sure to visit our website at:
WWW.Nextar.com
or write us at:
Nextar
1661 Fairplex Dn
LaVerne, CA USA 91750
copyright © 2006
42