Transcript
f INSTRUCTIONSHEETNO. 7 IS:4900 lNSTRUCllONS FOR ASSEMBLY AND lNSTALLA~N 0285 7, BEAD AND UNDERSTAND THESE fN5TRUCllDNS BEFDRE INSTALLING FIXTURE. Fhis fixture in intended for installation in accordance with the National Electrical :ode specifications. To prevent electrical shock, turn off electricity at fuse box Retain these instructions for maintenance reference. Code before and local or federal proceeding. NCANOESCENT UNITS 1. Thread FIXTURE ?. Mount UNIVERSAL SCREWS BAR into UNIVERSAL to OUTLET BAR. BOX with screws provided in OUTLET BOX, 3. Make connections: Black fixture leads or fixture leads without tracer mark to black supply Ieadsy white fixture leads or fixture leads with tracer mark to white supply lead. Use WIRE NUTS (local hardware item). Place connections in OUTLET BOX. Uninsulated wire is a GROUND WIRE and must be connected to a grounding terminal or a ground lead in the OUTLET BOX. L Position BACKPlATE 5. Hook bottom BACKPLATE over of GLASS and secure FIXTURE SCREWS. Secure with KNURLED DIFFUSER over CLIP on BACKPLATE. with THUMB SCREW. KNOBS. Swing GLASS CAUTfON MAXIMUM WATTAGE MARKED ON FIXTURE MUST NOT BE EXCEEOEO. /“_ / ~ ~#F~SER ~THUM’ -’. / / sCREw r to top of ‘ox ‘Rm UNIVERSALSAR /-- // /’-- //’/ - d--%-———7— DIFFUSER FIXTURESCREWS WIRENUTS --4- 1 LCLIP @ f$ECAUCUS ~m~<~[-~~<>[ms[[~~? Montreal, NEW JERSEY, QUEBEC, 07094.0508 CANADA