Transcript
/ INSTRUCTIONSHEETNo. lN!YrRUCTIONS \ lS:5556 R0387m FOR lN~ALLATION -x -R 7 READ AND UNDERWAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE. This ,fiXtllre is intended for installation in accordance with the National Electrical Code end 10cal or federal code specifications. To prevent electrical shock, turn off electricity at fuse box before proceeding. Retain thasa Inatructlons for rwferanoa 1. Thrsad NIPPLE into CROSSBAR. Thread (uPPER) CAP and LOCKNUT. Secure CROSSBAR with s$rewa provided in OUTLET BOX. to OUTLET BOX 2. Drop (LOWER) CAP and CANOPY over CORD, 3. Psee CORD through NIPPLE and tie a SINGLE depth and lock with LOCKNUT OVERHAND 4. Make connections Black fixture lead or fixture lead without fixture lead with tracer mark to white supply lead. KNOT ae shown. Adjust NIPPLE to CANOPY tracer mark to black eupply lea white fixtutp Grounding ie accomplished by connecting the GREEN GROUND WIRE fmm the fixtu~ to the GROUND WIRE from the OUTLET BOX, and to the IJNINSULATED GROUND JUMPER WIRE supplied with the fixture in the parta kit. Use WIRE NUTS (local hardware 5. Position 6. Inetall CAUTION: item) to make connections. Place connections CANOPY over OUTLET BOX and secure with (LOWER) CAP by threading recommended MAXIMUM in OUTLET BOX. onto NIPPLE. lamp. WAlTAGE AS MARKED ON FfXTURE MUST Nti SE SXCEEDED. SIN E u EW J FIXTURE CONFIGURATION VARIES WITH CATALOG NUMBER ‘---’m J —. “l-[<>[m[~<>[ml 1: ) I?”~, sEcAucus, .JERsEY,l)TClg~.ll~Cllj MO NT REAL, NEWQUEBE C, CANADA .— or