Download Leviton Programmer/Remote User's Manual
Transcript
x1 1 2 3 4 Press the PM center button on the x1 12:00 RZCPG M o n 0 5 . to 0 1 .bring 2 0 0 6 up the INCLUDE INCLUDE CNTRLLER Place controller CNTRLLER screen, where you will program mode be prompted to place the controller in See Instruction sheet Profil e in Default program mode. Stand By Menu Begin? Press NOTE: Leviton Controllers require Return an inclusion process that differs from Dimmers, Switches and PlugIn Modules. Controllers must be placed into program mode before they can be included into the network (refer to individual device instruction sheet). NOTE: If no controllers are in system, use down arrow button to skip to STEP 4. Once your controller has been placed in program mode, press the center button on the RZCPG. The RZCPG will go through the communication process OFF information for that device. The ON assign the node and TEXT EDITOR will display where you can name your device (refer to TEXT EDITOR pg. 6). ON Once your nameOFF is displayed, x1 press the center button .The INCLUDE CNTRLLER Node included! RZCPG will confirm inclusion Node ID #3: ON and prompt youOFF to continue to Room Controller INCLUDE CONTROLLER by More? Press pressing the center button or OFF ON Back Next Step to continue to the Next step by pressing the right soft key NOTE: The confirmation process will take some time, specifically in large networks. Remain close to the controller until the confirmation is complete. STEP 3 Update Controller NOTE: The INSTALL CHECKLIST screen will appear with the selection box around STEP 3 - Update Controller when NEXT STEP is chosen from STEP 2. Press the center button to bring up the UPDATE CNTRLS screen where a list of all the controllers in the network will be displayed. With the selection box around the first controller listed press the center button . x1 INSTALL CHECKLIST 1. Include Dim/Swch 2. Include Controller 3. Update Controller 4. Create Areas 5. Set Associations Back Next Step x1 UPDATE CNTRLS Room Controller Hall Controller Back (2) Who Is 7