1
Download Lantronix Computer Hardware 900-581 User's Manual
Transcript
5: Commands and Levels key <hexadecimal> Sets key. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. key text <text> Sets key. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. no key Removes key. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. key 3 (config-profile-security-wep-key:test1:3) level commands apply wlan Try out WLAN settings without saving them to Flash. If the settings do not work, when you reboot the device, it will still have the original settings. clrscrn Clears the screen. exit Exits to the next higher level. key <hexadecimal> Sets key. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. key text <text> Sets key. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. no key Removes key. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. key 3 (config-profile-security-wep-key:default_adhoc_profile:3) level commands apply wlan Try out WLAN settings without saving them to Flash. If the settings do not work, when you reboot the device, it will still have the original settings. clrscrn Clears the screen. exit Exits to the next higher level. key <hexadecimal> Sets key. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. key text <text> Sets key. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. no key Removes key. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. PremierWave EN Command Reference 182
