1
Download Lantronix Computer Hardware 900-581 User's Manual
Transcript
5: Commands and Levels flush serial enable Flushes serial data buffer when a tunneling connection is closed. flush stop character disable Forwards the stop character from the Line to the network. flush stop character enable Prevents the stop character from the Line from being forwarded to the network. modem control disable Does not watch the modem control pin to disconnect. modem control enable Watches the modem control pin and disconnects if it is not asserted. no stop character Removes the stop character. no timeout Disables disconnect after timeout feature for tunneling sessions. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. stop character <control> Sets the stop character. The character may be input as text, control, decimal, or hex. A control character has the form <control>C. A decimal value character has the form \99. A hex value character has the form 0xFF. timeout <milliseconds> Disconnects when no data has been received on the line (serial port) for the specified length of time. <milliseconds> = timeout in milliseconds. write Stores the current configuration in permanent memory. disconnect (tunnel-disconnect:1) level commands clrscrn Clears the screen. exit Returns to the tunnel level. flush serial disable Does not flush serial data upon closing a tunneling connection. flush serial enable Flushes serial data buffer when a tunneling connection is closed. flush stop character disable Forwards the stop character from the Line to the network. flush stop character enable Prevents the stop character from the Line from being forwarded to the network. modem control disable Does not watch the modem control pin to disconnect. modem control enable Watches the modem control pin and disconnects if it is not asserted. no stop character Removes the stop character. no timeout Disables disconnect after timeout feature for tunneling sessions. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. stop character <control> Sets the stop character. The character may be input as text, control, decimal, or hex. A control character has the form <control>C. A decimal value character has the form \99. A hex value character has the form 0xFF. timeout <milliseconds> Disconnects when no data has been received on the line (serial port) for the specified length of time. <milliseconds> = timeout in milliseconds. write Stores the current configuration in permanent memory. dns (dns) level commands clrscrn PremierWave EN Command Reference Clears the screen. 75
