1
Download HP 220mx Command Reference Guide
Transcript
SCSI Command Overview Optical Drive Control Through SCSI Optical Drive Control Through SCSI The optical drive can be controlled by the commands described in this document. This SCSI command set complies with ANSI X3.131-1994 standards. The role of the host computer and the target or the address of a disk is defined in the SCSI specifications as follows: Initiator The initiator, usually the host, issues the drive control commands. Target device The target, usually the drive, receives the command and controls the device. Addresses All SCSI commands refer to logical addresses unless otherwise stated. 1-2 Chapter 1
