Download Emerson LR125 Data Sheet
Transcript
Bulletin 71.2:LR125 TYPE MR95H PILOT TYPE 112 RESTRICTOR CONTROL SPRING DIAPHRAGM SUPPLY LINE VALVE PLUG MAIN SPRING DIAPHRAGM AND PLUG ASSEMBLY M1215 INLET PRESSURE INTERNAL STRAINER OUTLET PRESSURE ATMOSPHERIC PRESSURE LOADING PRESSURE TYPE LR125 WITH TYPE MR95H PILOT AND TYPE 112 RESTRICTOR Figure 3. Type LR125 Operational Schematic 12 Powder Paint Coating—Carbon steel body is powder paint coated providing superior impact, abrasion and corrosion resistance. Pilot Type Description Type MR95H—High-pressure pressure reducing pilot for 15 to 150 psig / 1.0 to 10.3 bar outlet pressures. Designed to handle inlet pressures up to 300 psig / 20.7 bar. Principle of Operation As long as the outlet (control) pressure is above the outlet pressure setting, the pilot valve plug or disk remains closed (Figure 3). Force from the main spring, in addition to inlet pressure bleeding through the restrictor, provide downward loading pressure to keep the main valve diaphragm and plug assembly tightly shutoff. 4 When the outlet pressure decreases below the pilot outlet pressure setting, the pilot plug or disk assembly opens. Loading pressure bleeds downstream through the pilot faster than it can be replaced through the supply line. This reduces loading pressure on top of the main valve diaphragm and plug assembly and lets the unbalanced force between inlet and loading pressure overcome the main spring force to open the Type LR125 diaphragm and plug assembly. As the outlet pressure rises toward the outlet pressure setting, it compresses the pilot diaphragm against the pilot control spring and lets the pilot valve plug or disk close. Loading pressure begins to build up on the Type LR125 diaphragm and plug assembly. The loading pressure, along with force from the main spring, pushes the diaphragm and plug assembly onto the tapered-edge seat, producing tight shutoff.