Download Dell W-IAP103 CLI Reference Guide

show ap debug dhcp-packets
show ap debug dhcp-packets
Description
This command displays information about the DHCP packets sent or received by a W-IAP.
Usage Guidelines
Use this command to view information about the DHCP packets trace information for a W-IAP.
Example
The following example shows the output of show ap debug dhcp-packets command:
Traced Dhcp Packets
------------------Timestamp Mtype Htype Hops TID Cip Yip Sip Gip Cmac
--------- ----- ----- ---- --- --- --- --- --- ----
The output of this command includes the following parameters:
Column
Description
Timestamp
Displays the timestamp for DHCP packets.
Mtype
Indicates the message type.
Htype
Indicates the hardware address type
Hops
Shows the number of hops.
TID
Shows the transaction ID.
Cip
Indicates the client IP address.
Yip
Indicates the IP address of the W-IAP.
Sip
Indicates the source IP address from which the DHCP packets originated.
Gip
Indicates the Gateway IP address.
Cmac
Indicates the MAC address of the client.
Command History
Version
Description
Dell Networking W-Series
Instant 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform
Command Mode
All platforms
Privileged EXEC mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show ap debug dhcp-packets | 265