Download Dell W-IAP103 CLI Reference Guide

show snmp-configuration
show snmp-configuration
Description
This command displays the Simple Network Management Protocol (SNMP) configuration details for a Virtual
Controller.
Usage Guidelines
Use this command to view the SNMP information configured on a Virtual Controller.
Example
The following example shows the output of show snmp-configuration command:
Engine ID:D8C7C8CBD420
Community Strings
----------------Name
---SNMPv3 Users
-----------Name Authentication Type Encryption Type
---- ------------------- --------------SNMP Trap Hosts
--------------IP Address Version Name Port Inform
---------- ------- ---- ---- ------
The output of this command includes the following parameters:
Parameter
Description
Engine ID
Displays the SNMP engine ID.
Community Strings
Displays the SNMP community strings..
SNMPv3 Users
Displays details about the SNMPv3 users.
Name
Indicates the name of the SNMP user
Authentication Type
Indicates the authentication protocol configured for the SNMP users.
Encryption Type
Indicates the encryption type, for example, Advanced Encryption Standard
(AES) or CBC-DES Symmetric Encryption Protocol (DES) configured for SNMP
users.
SNMP Trap Hosts
Displays the traps generated by the host system.
IP Address
Indicates the host IP address generating the SNM trap.
Version
Displays the SNMP version for which the trap is generated.
Name
Indicates the name of system generating the SNMP traps.
Port
Indicates the port number to which notification messages are sent.
Inform
Displays the SNMP inform messages to send to the configured host.
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide
show snmp-configuration | 451