Download Dell OpenManage Server Administrator Version 7.3 Command Line Interface Guide

NOTE: This command is not supported on SCSI RAID controllers.
Syntax
omconfig storage enclosure action=setalltempprobes
controller=id enclosure=<ENCLOSUREID> minwarn=n maxwarn=n,
where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure.
In this syntax, n is a user-specified alphanumeric string.
Example to
Set the thresholds for all temperature probes residing in enclosure 3 attached to connector
2 on controller 1, to 10 and 40 degree Celsius.
Example for SAS
controllers
omconfig storage enclosure action=setalltempprobes
controller=1 enclosure=2:3 minwarn=10 maxwarn=40
Omconfig Reset All Temperature Probe Thresholds
Table 114. oOmconfig Reset All Temperature Probe Thresholds
Description
Resets the minimum and maximum warning temperature thresholds back to their default
value for all temperature probes in the enclosure.
NOTE: This command is not supported on SCSI RAID controllers.
Syntax
omconfig storage enclosure action=resetalltempprobes
controller=id enclosure=<ENCLOSUREID>, where id is the controller ID. The
<ENCLOSUREID> variable specifies the enclosure.
In this syntax, n is a user-specified alphanumeric string.
Example to
Reset the thresholds for all temperature probes in enclosure 3 attached to connector 2 on
controller 1.
Example for SAS
controllers
omconfig storage enclosure action= resetalltempprobes
controller=1 enclosure=2:3
Omconfig Blink
Table 115. omconfig Blink
Description
Blinks the light-emitting diodes (LEDs) on the enclosure.
Syntax
omconfig storage enclosure action=blink controller=id
enclosure=<ENCLOSUREID>, where id is the controller ID. The <ENCLOSUREID>
variable specifies the enclosure.
Example to
Blink the LEDs for enclosure 3 attached to connector 2 on controller 1.
Example for SAS
controllers
omconfig storage enclosure action=blink controller=1
enclosure=2:3
Example for SCSI, SATA, omconfig storage enclosure action=blink controller=1
enclosure=2
and ATA controllers
Omconfig Battery Commands
The following table displays the omconfig command syntax required to execute battery tasks.
176