1
Download Dell Networking Z9500 Command Line Reference Guide
Transcript
Version Description 9.2(1.0) Introduced on the Z9500. 8.3.19.0 Introduced on the S4820T. 8.3.11.1 Introduced on the Z9000. 8.3.7.0 Introduced on the S4810. 7.6.1.0 Introduced on the S-Series. 7.5.1.0 Introduced on the C-Series. 6.1.1.0 Introduced on the E-Series. Usage Information The software prompts users for these passwords when the method for authentication or authorization used is "line". Related Commands enable password — sets the password for the enable command. login authentication — configures an authentication method to log in to the switch. service password-encryption — encrypts all passwords configured in the system. radius-server key — configures a key for all RADIUS communications between the switch and the RADIUS host server. tacacs-server key — configures a key for communication between a TACACS+ server and client. username — establishes an authentication system based on user names. password-attributes Configure the password attributes (strong password). Z9500 Syntax password-attributes [min-length number] [max-retry number] [lockout-period minutes][character-restriction [upper number] [lower number] [numeric number] [special-char number]] To return to the default, use the no password-attributes [min-length number] [max-retry number] [lockout-period minutes] [characterrestriction [upper number] [lower number] [numeric number] [special-char number]] command. Parameters 1466 min-length number (OPTIONAL) Enter the keywords min-length then the number of characters. The range is from 0 to 32 characters. max-retry number (OPTIONAL) Enter the keywords max-retry then the number of maximum password retries. The range is from 0 to 16. Security
