Download Dell Networking S5000 Command Line Reference Guide
Transcript
Parameters Defaults Command Modes Command History Example Related Commands group-id Displays the current configuration of all uplink-state groups or a specified group. The valid group-id values are 1 to 16. none • EXEC • EXEC Privilege Version 9.0(1.3) Introduced on the S5000. FTOS#show running-config uplink-state-group ! no enable uplink state track 1 downstream GigabitEthernet 0/2,4,6,11-19 upstream TengigabitEthernet 0/48, 52 upstream PortChannel 1 ! uplink state track 2 downstream GigabitEthernet 0/1,3,5,7-10 upstream TengigabitEthernet 0/56,60 • show uplink-state-group – displays the status information on a specified uplink-state group or all groups. • uplink-state-group – creates an uplink-state group and enables the tracking of upstream links. show uplink-state-group Display status information on a specified uplink-state group or all groups. S5000 Syntax Parameters Defaults Command Modes 1274 show uplink-state-group [group-id] [detail] group-id Displays status information on a specified uplink-state group or all groups. The valid group-id values are 1 to 16. detail Displays additional status information on the upstream and downstream interfaces in each group none • EXEC • EXEC Privilege
Related documents
Dell Networking Z9500 Command Line Reference Guide
Dell Force10 Command Line Reference Guide
Dell Force10 S4810P Command Line Reference Guide
Dell PowerEdge M IO Aggregator Configuration manual
Dell Networking S6000 Command Line Reference Guide
DELL X-Series S3048-ON
Brocade Communications Systems Switch 53-1001762-01 User's Manual
Dell Force10 Z9000 Addendum
Dell Force10 Z9000 Configuration manual
Dell Networking S6000 Configuration manual
DELL C7004
Dell Force10 S4810P Configuration manual