Download Dell Networking S5000 Command Line Reference Guide

Transcript
Parameters
Defaults
Command Modes
Command History
Example
Related
Commands
group-id
Displays the current configuration of all uplink-state groups or a
specified group. The valid group-id values are 1 to 16.
none
•
EXEC
•
EXEC Privilege
Version 9.0(1.3)
Introduced on the S5000.
FTOS#show running-config uplink-state-group
!
no enable
uplink state track 1
downstream GigabitEthernet 0/2,4,6,11-19
upstream TengigabitEthernet 0/48, 52
upstream PortChannel 1
!
uplink state track 2
downstream GigabitEthernet 0/1,3,5,7-10
upstream TengigabitEthernet 0/56,60
•
show uplink-state-group – displays the status information on a specified uplink-state
group or all groups.
•
uplink-state-group – creates an uplink-state group and enables the tracking of
upstream links.
show uplink-state-group
Display status information on a specified uplink-state group or all groups.
S5000
Syntax
Parameters
Defaults
Command Modes
1274
show uplink-state-group [group-id] [detail]
group-id
Displays status information on a specified uplink-state group or all
groups. The valid group-id values are 1 to 16.
detail
Displays additional status information on the upstream and
downstream interfaces in each group
none
•
EXEC
•
EXEC Privilege