1
Download Avaya Using Technician Interface Scripts User's Manual
Transcript
Using Technician Interface Scripts enable/disable atm Use the enable atm <option> commands to enable ATM Adaptation Layer Controller (ALC) link module services on a Bay Networks router, and the disable atm <option> commands to disable this service. For more information about the Bay Networks implementation of ATM, refer to Configuring ATM Services. The enable/disable atm commands support the following subcommand options: interface <line number> line connector <slot.connector> line circuit <circuit name> service <circuit number> interface <line number> Enables or disables a specific ATM interface. Sample Display - enable atm interface 1104101 ATM Interface 1104101 enabled. line circuit <circuit name> Enables or disables a specific ATM circuit. Sample Display - enable atm line circuit A51 ATM circuit A51 enabled. 3-6 117380-A Rev. A
