1
Download Avaya Using Technician Interface Scripts User's Manual
Transcript
enable/disable nbip enable/disable nbip Use the enable nbip <option> commands to enable NetBIOS services on a Bay Networks router, and the disable nbip <option> commands to disable NetBIOS services on a router. For more information about the Bay Networks implementation of NetBIOS, refer to Configuring IP Services. The enable/disable nbip commands support the following subcommand options: base interface <IP interface address> base Enables or disables NetBIOS on the router. Sample Display - enable nbip base NBIP base record enabled. interface <IP interface address> Enables or disables a specific NetBIOS over IP interface. Sample Display - enable nbip interface 130.1.1.1 NBIP interface 130.1.1.1 enabled. 117380-A Rev. A 3-35
