1
Download Avaya Using Technician Interface Scripts User's Manual
Transcript
Using Technician Interface Scripts enabled Displays LAPB lines that are configured and enabled. For definitions of column headings, see the disabled command. Sample Display - show lapb enabled LAPB Enabled Table -----------------Line.LLIndex Circuit Station Type Network Type ---------------- -------- ------------ -----------201101.0 S11 DCE NET2 Total entries: 1 lines [<line> | <line.llindex>] Displays information about LAPB lines for all configured lines or for a specified line. <line>|<line.llindex> Limits the display to the specified line or line and line index. The table includes the following information: 2-424 Line.LLIndex Line identifier and the lower-layer index identifier. Circuit Circuit number for this LAPB subsystem, associated with the driver or application running underneath it. Station Type Station type for this interface: DTE, DCE, or DXE (unassigned role). DXE indicates that the instance is enabled but that negotiation has not yet occurred. Window Size Default transmit and receive window size for this line. This parameter identifies the maximum number of unacknowledged sequence frames allowed for this DXE at one time. Window size ranges from 1 through 127; the default is 7. 117380-A Rev. A
