Download Avaya Configuring IP Utilities User's Manual

Configuring IP Utilities
For example, the following command line causes the system to automatically
execute the script file router1.bat at login:
server# auto-user-script router1.bat
server#
Using Site Manager
Complete the tasks in the following table to specify a new user’s login script file.
Site Manager Procedure
You do this
System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose Global Protocols.
The Global Protocols menu opens.
3. Choose Telnet Server.
The Telnet Server menu opens.
4. Choose Create Telnet Server.
The Telnet Configuration window opens.
5. Set the User’s Login Script parameter.
Click on Help or see the parameter
description on page A-9.
6. Click on OK.
Site Manager saves your changes and
exits the window.
Enabling and Disabling User Logout
By default, the user autoscript is is in effect for your Telnet session when you log
in. You can press control-c to cancel the user autoscript and access the Technician
Interface. To prevent users from canceling the user autoscript at login, set this
parameter to Enable.
Using the BCC
To prevent users from canceling the user autoscript at login, navigate to the
server-specific prompt and enter:
force-logout enabled
6-4
117358-A Rev. A