Download 3Com VCX V7000 Owner's Manual

Configuring Bridge Permissions
181
To remove one or more coverage rules from a phone extension:
1 Access the office location of the user whose call coverage you want to
configure (see Accessing a VCX Site through the Central Manager).
The USERS interface is enabled and the Users page appears. This page
lists all the users configured on this server. The menu options for the
USERS interface appear on the left side of the window.
2 Locate the user whose call coverage rule you want to delete.
3 In the Phones column, click the Phones link.
The User - Assigned Phones page appears for the selected user.
4 In the Actions column, click Call Coverage.
5 Do one of the following:
■
■
To remove a single coverage rule, click Delete in the Actions
column.
To remove a multiple coverage rules, enable the check box
preceding the name of each rule and click Delete Selected.
A confirmation box appears verifying you really want to remove these
coverage rules from the hunt group.
6 Click OK.
Configuring Bridge
Permissions
This section describes how to configure bridge permissions on a phone.
The VCX system allows you to set up an extension so that other users can
receive calls to that extension at their phones. You can grant permission
to up to four other users to receive calls intended for a “bridged”
extension.
The bridged phone is sometimes referred to as the primary phone. The
phone receiving bridged calls is sometimes referred to as the secondary
phone. A secondary phone may be on the same site as the primary phone
or, in a multi-site VCX system, a secondary phone may be located on a
remote site.
A bridged extension is typically used by an administrative assistant (the
secondary phone) to accept calls for one or more managers (primary
phones). Or one manager (primary phone) may be monitored by multiple
assistants (secondary phones).