Download Waldorf Rocket

Transcript
Basic Operation
Basic Operation
Editing Parameters
Switching on/ off
In order to edit a sound, you must access the appropriate
parameters. In spite of the Rocket’s compactness it uses a
sophisticated user interface allowing fast editing of any
parameter.
The Rocket is ready-to-operate after the connection to
the USB power supply or via USB cable to a suitable
computer.
Turning a dial clockwise increases the corresponding
value; turning it counterclockwise decreases it. Unbelievable! Switching a switch does exactly switch this
switch. Keep in mind, that some switches offers more
than two states.
System Volume
What do you know? The Headphone Volume knob a
controls the Rocket’s headphone volume The main audio
output always delivers a line level signal.
The Launch Button
A short tip on the Launch button sends out MIDI note C3
(MIDI note number 60). Use this button in case no MIDI
keyboard is connected.
Where are the Presets?
Presets are absent by design. Because of the very clear
controls we can assure you that you will be able to set an
universe of sounds within seconds.
w
w
Take a look at page 24 of this manual. Here you
will learn how to save sound parameters to your
computer.
Incoming MIDI data is indicated by blinking of the
Launch LED.
w
Rocket User´s Manual
The Launch button memorizes the last note received via MIDI and will use it for further triggering
until a new MIDI note arrives.
14
Another function of the Launch button will be
explained on page 24 of this manual.