Download Waldorf Rocket
Transcript
Basic Operation Basic Operation Editing Parameters Switching on/ off In order to edit a sound, you must access the appropriate parameters. In spite of the Rocket’s compactness it uses a sophisticated user interface allowing fast editing of any parameter. The Rocket is ready-to-operate after the connection to the USB power supply or via USB cable to a suitable computer. Turning a dial clockwise increases the corresponding value; turning it counterclockwise decreases it. Unbelievable! Switching a switch does exactly switch this switch. Keep in mind, that some switches offers more than two states. System Volume What do you know? The Headphone Volume knob a controls the Rocket’s headphone volume The main audio output always delivers a line level signal. The Launch Button A short tip on the Launch button sends out MIDI note C3 (MIDI note number 60). Use this button in case no MIDI keyboard is connected. Where are the Presets? Presets are absent by design. Because of the very clear controls we can assure you that you will be able to set an universe of sounds within seconds. w w Take a look at page 24 of this manual. Here you will learn how to save sound parameters to your computer. Incoming MIDI data is indicated by blinking of the Launch LED. w Rocket User´s Manual The Launch button memorizes the last note received via MIDI and will use it for further triggering until a new MIDI note arrives. 14 Another function of the Launch button will be explained on page 24 of this manual.