Download Gefen GEF-MOD-32432 video switch

INTRODUCTION
Pre-Configured Options
Before reading this User Manual, familiarize yourself with the rear panel of the 32x32
Modular Matrix.
The 32x32 Modular Matrix can accommodate up to four output cards and four input
cards. Each card provides eight connectors, providing a total of 32 inputs and outputs. The 32x32 Modular Matrix is sold pre-configured with a combination of input and output
cards best suited for the needs of your application. We will cover each configuration in
the next section. First, we will identify the location of each input and output card on the
matrix.
NOTE: When a card is not installed, it is recommended that a cover
plate be installed over the expansion bay to prevent dust and other
foreign particles from entering the matrix.
Matrix Layout
The bottom-four expansion bays of the matrix only accept input cards. The top-four
expansion bays only accept output cards. Each expansion bay on the matrix is identified
with a letter: A, B, C, and D, from top to bottom (see next page).
The inputs and outputs are numbered on each card, from left-to-right.
Blue LEDs on each card indicate that the card is properly powered.
Refer to page 10 for detailed information on the rear-panel layout.
Cover plate
Power indicator
Output bays
3