Download Philips LAN Docking Station

DNote
Once the firmware upgrade is complete, the
LAN Docking Station will restart. You may get
disconnected from the configuration interface.
ENGLIS H
4 The configuration settings of the LAN
Docking Station will reset to their factory
defaults, and the LAN Docking Station will
restart. The IP address of the LAN Docking
Station will be set to 192.168.109.1 (subnet
mask 255.255.255.0).
5 Open the LAN Docking Station
configuration interface by entering its IP
address in your Web browser.
6 You will be prompted to enter a user name
and a password. Leave the user name field
empty and enter ‚administrator‘ in the
PASSWORD field.
7 Change the IP address of the LAN Docking
Station according to your network policy.
See Changing the IP address of the LAN
Docking Station on page 13 for more
information.
4.11 Resetting to factory defaults
Follow these steps to reset the LAN Docking
Station to its factory default configuration
settings:
BWarning: When you reset the LAN
Docking Station, all your configuration settings
will be lost.
1 Make sure that the LAN Docking Station is
connected to the main power supply using
the Philips power supply.
2 Slide a Digital pocket Memo 9600 or 9620
into the docking slot of the LAN Docking
Station.
3 Press and hold the FUNCTION and the
MENU button on the Digital Pocket Memo
simultaneously for 3 seconds.
User manual
lfh9160_ifu_en-de-fr-es.indb 17
17
2008-09-01 16:31:57