Download Intermec PD41

Chapter 4 — Troubleshooting and Maintaining the Printer
Use a soft cloth moistened with isopropyl alcohol to clean the inside
of the printer.
Isopropyl alcohol is a highly flammable, moderately toxic, and
mildly irritating substance.
Be sure to keep the following parts clean:
•
Drive roller and tear bar
•
Media edge guides and media path
•
Label sensors
If there are stuck labels, or adhesive residue from labels, peel as much
as possible with your fingers, and then use isopropyl alcohol to
dissolve the remaining adhesive.
Cleaning the Exterior of the Printer
Make sure to keep the exterior of the printer clean, this will reduce the
risk of dust or foreign particles reaching the inside of the printer and
affect printer functionality.
Use a soft cloth, possibly moistened with water or a mild detergent
when cleaning the printer externally. Make sure to keep the surface
surrounding the printer clean as well.
If you use the printer in an environment where the premises are
cleaned by a water hose or steam, move the printer to another
room or cover it very carefully with a plastic sheet and make sure
that the power cord is unplugged.
90
PD41 and PD42 Commercial Printer User’s Manual