Download IOCELL Networks 351UNE storage enclosure

IOCELL Networks NetDISK User Manual
Network Direct Attached Storage / NDAS
7.9 Managing Binds
There are some operations that can change the configuration of a bind after it is made
and used. Bind configurations can be only changed while it is not being used by any
PCs. You can check what operations are available by right clicking on the bound device
or each member device. Each operation menu becomes available only when the
operation can be applied.
Add a Spare Disk
You can add one spare disk to a Mirror (RAID1) bind type. If the RAID1 bind has a spare
disk, the spare disk will be used when one of the bind member devices is unavailable or
found to be defective. The spare disk must be large enough to be a member of the
existing mirror.
48