1
Download Audiocodes Mediant 600
Transcript
SIP User's Manual 4. ini File Configuration ini File Parameter WarningToneDuration FirstCallWaitingToneID Description Defines the duration (in seconds) for which Off-Hook Warning Tone is played to the user. The valid range is -1 to 2,147,483,647. The default is 600. Notes: This parameter is applicable only to Mediant 1000. A negative value indicates that the tone is played infinitely. Determines the index of the first Call Waiting Tone in the CPT file. This feature enables the called party to distinguish between four different call origins (e.g., external vs. internal calls). The device plays the tone received in the 'play tone CallWaitingTone#' parameter of an INFO message + the value of this parameter - 1. The valid range is -1 to 100. The default value is -1 (not used). Notes: This parameter is applicable only to Mediant 1000. It is assumed that all Call Waiting Tones are defined in sequence in the CPT file. This feature is relevant only to Broadsoft's application servers (the tone is played using INFO message). RTPOnlyModeForTrunk_I For a description of this parameter, refer to "Configuring the Trunk Settings" on page 96. D RTPOnlyMode For a description of this parameter, refer to ''Advanced Parameters'' on page 166. TimeoutBetween100And1 Defines the timeout (in msec) between receiving a 100 Trying response and a subsequent 18x response. If a 18x response is not received 8x before this timer expires, the call is disconnected. The valid range is 0 to 32,000. The default value is 0 (i.e., no timeout). TransparentCoderPresent Determines the format of the Transparent coder representation in the SDP. ation RxDTMFOption Version 5.4 [0] = clearmode (default) [1] = X-CCD For a description of this parameter, refer to ''DTMF & Dialing Parameters'' on page 160. 335 May 2008
