1
Download Stratus ftServer System Administrator`s Guide for the Windows
Transcript
Contents Managing RDR Disks Creating a First RDR Virtual Disk Mirroring Disks Using RDR RDR Disk Numbering Adding a Physical Disk to an RDR Virtual Disk Disk Failures During Resynchronization Write Caching Setting the Cache Flush Interval Read-load (LUN Load) Balancing Mirroring Dynamic Disks with RDR Setting the Active RDR Disk (Plex) Deleting the RDR Configuration on a Physical Disk Changing Automount Behavior Removing a Physical Disk from an RDR Virtual Disk Deporting a Physical Disk from an RDR Virtual Disk Creating a Spare Bootable RDR Disk Breaking a Physical Disk from an RDR Virtual Disk Setting or Clearing the MTBF for Disks Setting the Hard MTBF Threshold Setting the MTBF Faultcount Limit Setting the Soft MTBF Threshold Clearing MTBF Settings Booting a System with a Backup RDR Boot Disk Reusing Data Disks Reusing a Stored-Data Disk Removing the RDR Configuration from a Stored-Data Disk Resynchronizing RDR Disks Using Resynchronize This Physical Disk From RDR Virtual Disk Using Resynchronize Physical Disks Of This RDR Virtual Disk Resynchronizing a Backup Boot RDR Disk Recovering and Replacing RDR Disks Verifying RDR Disks Making Sure You Do Not Boot from a Stale Disk Configuring the Priority of RDR Virtual Disk Resynchronization Using Volume Mirroring for Fault Tolerance Mirrored Volume Resynchronization Volume Resynchronization After Rebooting Using Hardware RAID Controllers For Fault Tolerance ftSMC Interface for Storage Enclosures and Subsystems Storage Enclosure Node Slot Node 4-4 4-5 4-6 4-6 4-7 4-10 4-10 4-11 4-11 4-12 4-12 4-13 4-14 4-14 4-15 4-16 4-17 4-17 4-18 4-18 4-19 4-19 4-20 4-20 4-20 4-20 4-21 4-22 4-22 4-22 4-23 4-23 4-24 4-25 4-25 4-26 4-26 4-27 4-27 4-27 4-28 Contents v
