Download Beta Draft Confidential

Beta Draft Confidential
Table 4-3
Alarms Settings Page
Alarm Settings Field Descriptions (Continued)
Field
Description
Parameters
Select to remind you that the HVAC
system requires maintenance.
„
Disables (default) – Interval
reminder disabled.
This feature allows you to set time
intervals between changing and/or
cleaning the HVAC filter. If enabled,
an alarm condition is set after the
pre-set interval has expired, and is
displayed on the Status & Control
Page (page 4-4).
„
10, 30, 60, 90, 120, 240, 365
Runtime Days – The runtime
interval after which an alarm will
be set to remind the user of the
need for HVAC maintenance.
Filter Alarms
Filter (change)
Reminder
In addition, this alarm is sent to the
Proliphix web site to trigger an E-mail
notification if this function is
Enabled.
Note: This is a minor (yellow) alarm
condition.
The TMI displays the following additional fields upon different settings and conditions of the Filter
Reminder state.
Filter Usage
Displays a running tally of Runtime
Days (x.x) which have elapsed since
the previous Filter Last Replaced
date.
If this value is greater than the preset
Runtime Days, it is displayed in red
and an alarm is generated indicating
that the Filter Reminder interval has
expired.
Note: This field is displayed only
when Filter Reminder in enabled.
Filter Last
Replaced
Click to force the current thermostat
date and time into the Date and Time
field above and restart the interval set
within the Filter Reminder field
above.
For example, if the filter is changed
prior to the Filter Reminder interval
expiration, checking this box and
clicking Submit restarts the interval
timer.
Note: This field is displayed only
when Filter Reminder in enabled.
UniVista User’s Guide, Release 1.0
Part No. 600-09000-001, Rev. 2
4-17