Download MICROX TX3 - Loligo Systems

Preface
1
1
Preface
Congratulations!
You have chosen a new innovative technology for measuring oxygen!
The Microx TX3 is a precise single channel,
temperature compensated oxygen meter
specially developed for very small fiber-optic
oxygen microsensors (tip diameter < 50 µm).
The small outer dimensions, low power
consumption and a robust box make it ready for
indoor and outdoor applications.
The Microx TX3 was specially developed for
very small fiber-optic oxygen microsensors. It is
based on a novel technology, which creates
very stable, internal referenced measured
values. This enables a more flexible use of
oxygen sensors in many different fields of
interest.
Optical oxygen microsensors (also called optodes) have the following outstanding properties:
• They do not consume oxygen
• Their signal does not depend on the flow rate of the sample
• Diameter of the micro-sensor tip is < 50 µm
• Fast response time better than 1 s
• Measures oxygen in both liquids and the gas phase
• On-line temperature-compensation of the oxygen content
Therefore, they are ideally suited for the examination of very small sample volumes and for
measuring oxygen gradients with high spatial resolution in heterogeneous systems. Their
small dimensions even allow measurements in living systems.
A set of different microsensors is available to make sure to meet your requirements for you
applications.
Please feel free to contact our service team to find the best solution for your application.
Your Loligo Team