Download DP5 Programmer`s Guide

DP5 Programmer‟s Guide Rev A4
5.1.65 VOLU – Turn the PX5 speaker ON/OFF
Command:
Parameter:
Range:
Default:
VOLU
[ON|OF{F}]
ON or OF{F}
OFF
Dependencies: none
Supported:
FW6.01 and later; PX5 only, not supported by DP5 or DP5G, which don‟t have speakers
Description:
This turns the PX5 speaker on or off. This simulates a Geiger counter, and produces a
click for each event recorded by the fast channel.
Errors:
An INVALID PARAMETER error will be returned if the parameter is not ON or OF{F}.
Example:
VOLU=ON;
Amptek Inc.
// Enable the PX5 speaker
Page 140 of 140