Download User`s Guide User`s Guide

Installation
Pre-installation
15
Pre-installation
Partitions
It is recommended to store Archive and Log Files on separate partitions or on backup storages.
Before installation it is recommended to split the target system into three separate partitions,
whereon:
1.
Primary partition for the system files
2.
Secondary partition for the Security Server log files (active logs)
3.
Third partition for archive files
NOTE: In case of using SQL server for log storing, it is recommended to install it to a separated
computer.
Test measurements
IMPORTANT: Data published hereunder are valid for general hardware configuration and for
informational purposes only. In certain cases, recorded data may vary.
Hardware Configuration
Events entry in the log / second
CPU
Memory
HDD
10 Clients
100 Clients
350 Clients
1xP Centrino
1,7 GHz
1 GB
SATA 100
7680
6200
6030
1x P4 Xeon
3,06 GHz
2 GB
SCSI UW3
3200
3170
2920
1xP4 3,2 GHz
1,25 GB
SATA 100
3800
3100
2900
Storage sizing
The following formula helps to calculate log file storage consumption (in megabytes) in a monthly
period:
𝑀𝐵𝑦𝑡𝑒 =
𝐶𝐿𝑁𝑇𝑁 ∗ 𝑊𝐾𝐻 ∗ 25 ∗ ( 𝑂𝐹𝐹𝑁 + 𝐸𝑅𝑃𝑁 + 𝑀𝐷𝑁 + 𝑂𝑇𝐻𝑁 + 20)
∗ 𝑀𝑊𝐷
10242
Formula contents

CLNTN - Number of Clients connected to the Grayteq DLP Security Server

WKH - Working hours per day

OFFN - Repartition of Office applications installed on Clients that connected to Grayteq DLP
Security Server, in percentage, value to be multiplied by two. Example: in case if every Client
use Office application, whereas the no. of Clients is 100, this value is two hundred (200)

ERPN - Repartition of ERP applications installed on Clients, connected to the Grayteq DLP
Security Server, in percentage, value to be divided by two. Example: in case if every Client
use ERP applications, whereas the no. of Clients is 100, this value is fifty (50)

MDN - Repartition of the media usage on the Clients, connected to the Grayteq DLP Security
Server, in percentage, value to be divided by two. Example: in case if every Client use media
files, whereas the no. of Clients is 100, this value is fifty (50)
Grayteq DLP Management Suite and Grayteq DLP
User’s Guide