Download Intermate i5 Stepper Machine User Manual

Indention, page no.
The horizontal start position of the index page numbers in
Inches, pels absolute to the left edge of the page according
the rotation specified by the global settings for the
Overlay.
Rotation:
Rotation of the index lines. Valid values are
000,090,180,270. Note that 180 and 270 rotation is only
possible for interface type on IBM3812 and IBM3816.
Font, text
Font type for the index lines. Prompt by F4
Font, page no.
Font type for the page numbers. Prompt by F4
Line spacing:
Is dissolved in n/240 inch. For example 6 lines per inch
corresponds to 40/240 inch.
Overflow limit
If there are more index lines in the table that can be
contained within this limit, defined in Inches, pels from the
upper edge of the page, the system will automatically
continue on a new page.
Drawer:
A specific drawer the paper for the index page should be
taken from. Default is *OVERLAY (specified in the global
settings of the overlay)
3=Overlay + spool entry
Seqnbr. Type
3,0
3
Description
Overlay + spool entry
Overlay name.....................: ___________ Name, F4=list
Index text.......................:
Profit Report_____________________________________
Include in index.................: _
(Y N)
Reset page numbering.............: _
(Y N)
Drawer...........................: ________ (*OVERLAY 1 2 3 4 6)
Link name for APFLNK-command.....: _________
F4 = Prompt
For each spool entry you intend to include in the report, there must exist a definition of
which overlay should be used for this particular part of the report. The order of insertion of
this sequence line in the report composition must therefore be in the same order as you
wish the input overlay entries appear in the report.
Overlay name:
The overlay used for this spool entry to be included in the
report.
Index text:
A text for recognition of this spool entry in the index
(optional)
Include in Index:
Y Includes the above text in the index
Reset numbering:
Reset continuous numbering. Only state Y if you want to
start each spool entry used in the report with page number 1
Drawer:
A specific drawer the paper for this spool entry should be
taken from. Default is *OVERLAY (specified in the global
settings of the overlay)
User’s Manual for InterForm400®
261