Download Epson 7600 Printer User Manual

EPSON Stylus Pro 7600/9600
Revision A
5.2.6.1 Parameter Initialize
Table 5-28.
Item
Execute parameter initialization.
C H E C K
P O IN T
Without replacing the relevant parts, never use this function to
initialize the counter; otherwise, control after that will not agree
with the condition of the printer mechanism.
Waste ink record initialization
CR motor record initialization
PF motor record initialization
Lever record initialization
Cover record initialization
Ink lever record initialization
Contents
Waste ink counter
CR motor round trip count
PF motor travel
Paper presser lever up and down count
Cover Open/Close count
Ink lever up and down count
Table 5-28.
Item
All initialization
Capping position initialization
PF resolution initialization
Serial number initialization
Head record initialization
Wiper record initialization
Rubbing record initialization
Adjustment
Contents
CR motor round trip count
PF motor travel
Head ink discharge count (Each color)
Cleaning count
The number of printed sheets
Ink volume counter
Waste ink counter
Cutting count
Gap adjustment value
CR origin compensation value (Capping position)
PF origin compensation value
Head slide origin compensation value
Front sensor position compensation value
Rear sensor position compensation value
Edge sensor longitudinal position compensation value
Edge sensor lateral position compensation value
Cutter longitudinal position compensation value
Flushing position
PF distance correction 1 ~ 3
Serial number
Wiping count
Rubbing count
Ink tube round trip count
Paper presser lever up and down count
Cover Open/Close count
Ink lever up and down count
CR origin compensation value (Capping position)
PF distance correction1 ~ 3
Serial number
Head ink discharge count (Each color))
Wiping count
Rubbing count
Self-diagnostic Function
261