1
Download 3Com 3500 Switch User Manual
Transcript
458 CHAPTER 16: INTERNET PROTOCOL (IP) ip rip routeAggregation Mode ✓ 3500 ✓ 9000 9400 For CoreBuilder 9000: Applies to Layer 3 switching modules only. Sets the route aggregation mode. Valid Minimum Abbreviation ip ri ro Important Considerations ■ 3900 9300 Route aggregation mode determines which route table entries are sent during a RIP Version 2 update. ■ ■ If route aggregation mode is enabled, RIP-2 can function like RIP-1 and “collapse” route table entries for all subnets of a directly connected network. For example, if route aggregation is enabled, and the system is advertising subnets 150.100.31.0 and 150.100.32.0, only the entry for network 150.100.0.0 is sent in the update. With RIP Version 2, you must enable route aggregation mode if you want the interface to collapse the route table entries and function like RIP-1. If route aggregation mode is disabled (the default), a RIP-2 update sends all routing table entries. Options Prompt Description IP interfaces Index number of the interfaces for which you want to set the route aggregation mode Possible Values ■ ■ ■ Route aggregation mode Whether you want to implement route aggregation on the selected interface [Default] One or more Previous selectable entry, if interface indexes applicable all ? (for a list of selectable interface indexes) ■ disabled ■ enabled Current value
