1
Download 3Com 3500 Switch User Manual
Transcript
278 CHAPTER 9: BRIDGE-WIDE PARAMETERS bridge multicast igmp qPort 3500 ✓ 9000 ✓ 9400 ✓ 3900 ✓ 9300 For CoreBuilder 9000: Applies to Layer 2 switching modules only. Displays the number of the port that receives incoming IGMP queries for the selected VLAN. Valid Minimum Abbreviation b mu i qp Important Considerations ■ If no query packets have been received within the last five minutes (approximately) when you enter this command, the system responds: No queries are heard by the switch ■ For the CoreBuilder 3500 system and CoreBuilder 9000 Layer 3 modules, IGMP commands exist under the ip multicast igmp menu. Options Prompt Description VLAN ID ID number of the VLAN for which you want to display the port that last received query packets Possible Values ■ ■ [Default] A valid VLAN ID 1 (Default VLAN) (VID) ? (for a list of selectable VIDs)
