Download 3Com 1000BASE Switch User Manual
Transcript
TECHNICAL SPECIFICATIONS Operating Temperature 0 to 50°C (32 to 122°F) Operating Humidity 10 to 95% non-condensing Power Consumption 15W maximum Safety Standards ■ UL 1950 ■ EN 60950 ■ CSA 22.2#950 ■ IEC 60950 Electromagnetic Compatibility CISPR 22 Class A* EN55022 Class A* AS/NZS 3548 Class A* FCC Part 15 Subpart B Class A ICES-003 Class A VCCI Class A* CNS 13438 Class A Korean EMC Approval Class A EN55024 *Category 5 screened or unscreened cables must be used to ensure compliance with the Class A requirements of these standards. ELECTROMAGNETIC COMPATIBILITY STATEMENTS FCC Statement Information To The User This equipment has been tested with a class A computing device and has been found to comply with part 15 of FCC Rules. Operation in a residential area may cause unacceptable interference to radio and TV receptions, requiring the operator to take whatever steps are necessary to correct the interference. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient the receiving antenna. Relocate the equipment with respect to the receiver. CSA Statement Move the equipment away from the receiver. This Class A digital apparatus meets all requirements of the Canadian interference-Causing Equipment Regulations. Plug the equipment into a different outlet so that equipment and receiver are on different branch circuits. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet prepared by the Federal Communications Commission helpful: How to Identify and Resolve Radio-TV Interference Problems VCCI Statement This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. BSMI Statement In order to meet FCC emissions limits, this equipment must be used only with cables which comply with IEEE 802.3. Europe This product complies with the European Low Voltage Directive 73/23/EEC and EMC Directive 89/336/EEC as amended by the European Directive 93/68/EEC. 4