Download Craftsman 580.323300 Operating instructions
Transcript
Owner's Manuam ® Modet No. 580.323300 HOURS: Mort. = Fri. 8 a.m. to 5 p.m. {CT) o o o o ° CAUTION: Before using this product, read this manual and follow aH its Safety Ru_es and Operating instructions. Safety Assembly Operation Maintenance Parts ,, Espa_ol Sears, Visit Roebuck our Craftsman Part No. 191575GS and Co., Hoffman website: Draft6 Estates, www.sears.com/craftsman 12004) IL 60179 WARRANTY .............................. SAFETY RULES ......................... KNOW YOUR GENERATOR ASSEMBLY 2 3-4 NOTES SCHEMATIC/WIRING ............................... 6 REPLACEMENT ........................... 7-10 SPECIFICATIONS MAINTENANCE ......................... 11 ........................ 12-14 STORAG E ............................... 15 LIMtTED WARRANTY NOTES ...................... 16 ................................. 5 OPERATION ................. TROUBLESHOOTING DIAGRAM 17 .......... PARTS ................. 18-19 20-26 ................................. EMISSION SYSTEM WARRANTY 27 ......... ESPA_IOL ............................. HOW TO ORDER PARTS FOR CRAFTSMAN 28-29 30-47 .......... BACK PAGE GENERATORS SEARS warrants to the original purchaser that the alternator and engine for its portable generator will be free from defects in materials or workmanship for the items and period set forth below from the date of original purchase. This warranty is not transferable. CONSUMER* COMMERCIAL* Alternator 2 Years (2rid year parts only) 1 Year Engine 2 Years (2nd year parts only) 1 Year * NOTE: For the purpose of this warranty "Consumer Use" means personal residential household and emergency use by odginal purchaser, not to be used as a primary source of power. "Commercial Use" means all other uses, including rental, construction, commercial, and income producing purposes. Once a generator has experienced commercial use, it shall thereafter be considered a commercial use generator for the purpose of this warranty. During said warranty period, SEARS will, at its option, repair or replace any part which, upon examination by SEARS, is found to be defective under normal use and service**. Starting batteries are not warranted by SEARS. All transportation costs under warranty, including return to the factory if necessary, are to be borne by the purchaser and prepaid by him. This warranty does not cover normal maintenance and service and does not apply to a generator set, alternator or engine, or parts which have been subjected to improper or unauthorized installation or alteration, misuse, negligence, accident, overloading, over-speeding, improper maintenance, repair or storage so as, in SEARS's judgment, to adversely affect its performance and reliability. ** NORMAL WEAR: As with all mechanical devices, engines need periodic parts service and replacement to perform well. This warranty will not cover repair when normal use has exhausted the life of a part or engine. THERE IS NO OTHER EXPRESS WARRANTY. SEARS HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TO THE EXTENT PERMITTED BY LAW. THE DURATION OF ANY IMPLIED WARRANTIES WHICH CANNOT BE DISCLAIMED IS LIMITED TO THE TIME PERIOD AS SPECIFIED IN THE EXPRESS WARRANTY. LIABILITY FOR CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES UNDER ANY AND ALL WARRANTIES IS EXCLUDED. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. For service, see your nearest SEARS authorized warranty service facility. Warranty service can be performed only by a SEARS authorized service facility. This warranty will not apply to service at any other facility. At the time of requesting warranty service, evidence of original purchase date must be presented. SEARS, ROEBUCK and CO., D/817WA, Hoffman Estates, IL 60179 U.S.A. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER _Read familiarthiswith manual become your carefully pressure and washer. Know its applications, its limitations, and any hazards involved. The safety alert symbol (_,) is used with a signal word (DANGER, CAUTION, WARNING), a pictorial and/or a safety message to alert you to hazards. DANGER indicates a hazard which, if not avoided, will result in death or serious injury. WARNING indicates a hazard which, if not avoided, could result in death or serious injury. CAUTION indicates a hazard which, if not avoided, might result in minor or moderate injury. CAUTION, when used without the alert symbol, indicates a situation that could result in equipment damage. Follow safety messages to avoid or reduce the risk of injury or death. Operate generator ONLY outdoors, Keep at least 2 feet of clearance on all sides generator for adequate ventilation, of DO NOT operate generator inside any building enclosure, including the generator compartment recreational vehicle (RV). or of a DANGER WARNING The engine exhaust from this product contains chemicaJs known to the State of CaJifornJa to cause cancer, birth defects, or other reproductive harm. WARNING • This generator Regulation marine does not meet 33CFR-183 U. S. Coast and should Guard not be used on applications, • Failure to use the appropriate U. S. Coast Guard approved generator could result in bodily injury and/or property Hazard damage. Symbols When using generator for backup power, notify utility company. Use approved transfer equipment to isolate generator from electric utility. Use a ground circuit fault interrupter (GFCI) in any damp or highly conductive area, such as metal decking or steel work. DO NOT touch bare wires DO NOT use generator with electrical cords worn, frayed, bare or otherwise damaged. DO NOT operate generator and Meanings Electrical Shock Explosion are in the rain. persons or children to operate WARNING Electrical Shock Fire WHEN ADJUSTING GENERATOR * Disconnect place Toxic Fumes which DO NOT handle generator or electrical cords while standing in water, while barefoot, or while hands or feet are wet. DO NOT allow unqualified or service generator. Electrocution or receptacles. Hot Surface WHEN OR MAKING the spark the wire where TESTING Use approved DO NOT check FOR REPAIRS plug wire from it cannot contact ENGINE SPARK TO YOUR the spark spark plug and plug. spark plug tester. for spark with spark plug removed. WARNING WHEN ADDING OR DRAINmNG Turn generator before pressure FUEL OFF and let it cool removing CAUTION fuel cap. Loosen at least with governed supplies rated running 2 minutes cap slowly DO NOT tamper correct at governed DO NOT to relieve modify generator in tank. overfill tank. Allow Keep fuel away from heat, and other DO NOT WHEN ignition Ensure spark open for fuel expansion. flames, pilot lights, or smoke. See "Don't EQUIPMENT plug, muffler, fuel cap and air cleaner are in place. crank If fuel spills, engine. WHEN engine wait until it evaporates OPERATING This generator WHEN before or equipment at angle is not for use in mobile TRANSPORTmNG Disconnect starting which in OFF Turn electrical loads OFF before stopping generator. position, connecting then turn ON and disconnect from generator CAUTION causes equipment STORING OR REPAIRING with fuel tank EMPTY spark or Use generator EQUIPMENT or with fuel shutoff Operate plug wire. FUEL OR EQUIPMENT WiTH FUEL IN only for intended If you have questions contact Sears. DO NOT generator expose dirt, or corrosive away from furnaces, dryers or other ignition source appliances because stoves, that they water heaters, have pilot can ignite clothes light or other fuel vapors. WARNING DO NOT disconnect equipment to cool before touching. In the State of California a spark attester ts required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. If you equip the muffler with a spark arrester, it must be maintained in effective working order.You can order a spark attester through your authorized Sears service dealer. generator them uses. intended only on level use, ask dealer to excessive through overheat, moisture, cooling turn them slots. off and from generator. Shut off generator if: -electrical output is lost; sparks, smokes, excessively. or surfaces. vapors. devices °unit vibrates DO NOT touch hot surfaces. about insert any objects If connected °equipment Allow loads before for operation. TANK Store electrical stabilize applications. Transport/repair valve OFF. WHEN plug removed. Generator". EQUBPMENT Do not tip engine fue! to spill. marine with spark Overload Start generator and let engine electrical loads. Connect DO NOT in any way. sources. light a cigarette STARTING when CAUTION space sparks, Generator and voltage speed. Fill or drain fuel tank outdoors. DO NOT speed. frequency or emits flames; dust, KNOW YOUR GENERATOR Read the owner's manual and safety rules before operating your generator, Compare the illustrations with your generator to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. Rocker Switch FueITank Oil Fill Cap/Dipstick Recoil Starter Choke Lever Air Cleaner 120 Volt AC, 15 Amp Receptacles Circuit Breakers Grounding Fastener 120 Volt AC, 15 Amp, Duplex Receptacles -- May be used to supply electrical power for the operation of 120 Volt AC, 15 Amp, single phase, 60 Hz electrical, lighting, appliance, tool and motor loads. Air Cleaner -- Filters intake air as it is drawn into the engine. Grounding Fastener -- if required, please consult a qualified electrician, electrical inspector, or the local agency having jurisdiction. Circuit Breakers -- Each receptacle socket is protected against electrical overload with "push to reset" circuit breakers. Choke Lever -- Used when starting a cold engine. Fuel Tank -- Tank holds 1 U.S. gallon of unleaded fuel. OH Fill Cap/Dipstick -- Check and fill engine with oil here. See page 6 for oil recommendations and filling instructions. Recoil Starter -- Used for starting the engine. Rocker Switch -- Set switch to "On" prior to using recoil starter. Set switch to "Off" to switch off engine. TO REMOVE CARTON GENERATOR FROM ° Open top flaps of shipping carton. • Slice two corners at end of carton from top to bottom so the panel can be folded down flat, then remove all packing material. • Remove the generator and contents from the shipping carton. CARTON NOTE: You may not need to use all the supplied oil. 5. Replace and tighten dipstick. NOTE: Check oil often during engine break-in. Add Fuel CONTENTS Check all contents against those listed below: ° Main unit • • WARNING Engine oil Owner's manual if any parts are missing or damaged, carl the generator helpline at 1-800-222-3136. WHEN BEFORE Add STARTING Engine THE NOTE: When adding oH to the engine crankcase, use only high quality detergent oil rated with API service classification SF, SG, SH, SJ or higher rated SAE 30 weight. DO NOT use special additives. 1. Choose a viscosity according to the table below: TEMPERATURE FUEL Fill or drain fuel tank outdoors. Oil DO NOT IMPORTANT: Any attempt to crank or start the engine before it has been properly serviced with the recommended oil may result in an engine failure. STARTING ADDING Turn generator OFF and let it coo! at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank. RANGE ANTICIPATED BEFORE NEXT overfill tank. Allow space for fuel expansion. Keep fue! away from sparks, open flames, heat, and other ignition sources. DO NOT light a cigarette pilot lights, or smoke. NOTE: This gasoline engine is certified to operate on gasoline. Exhaust Emission Control System: EM (Engine Modifications). 1. Use clean, fresh, regular UNLEADED fuel with a minimum of 85 octane with equipment. DO NOT use fuel which contains Methanol. DO NOT mix oil with fuel. 2. Clean area around fuel fin cap, remove cap. 3. Slowly add regular unleaded fuel to fuel tank. Be careful not to overfill. Allow about 1.5" of tank space for fuel expansion, as shown here. 4. Install fuel cap and wipe up any spilled fuel. OIL CHANGE * The use of multi-viscosity oils (5W-30, 10W-30, etc.) in temperatures above 40°F (4°C) will result in higher than normal oil consumption. When using a multiviscosity oil, check oil more frequently. ** If using SAE 30 oil in temperatures below 40°F (4°C), it will result in hard starting and possible engine bore damage due to inadequate lubrication. 2. Place generator on a level surface and clean area around oil fill. 3. Remove oil dipstick and wipe dipstick with clean cloth. Replace and tighten dipstick. Remove and and check oil level. . Slowly pour oil into oil fill opening. Pause to permit oil to settle. Fill to "Full" mark on dipstick. DO NOT OVERFILL. Remove dipstick and check oil level. CAUTION! AlcohoFblended fuels (called gasohol, ethanol or methanol) can attract moisture, which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the fuel tank, start the engine and let it run until the fuel lines and carburetor are empty. Use flesh fuel next season. See "Storage" on page 15 for additional information. NEVER use engine or carburetor cleaner products in the fuel tank as permanent damage may occur. HOW TO USE YOUR GENERATOR ToSta_TheEngine CAUTION if you have any problems operating your generator after reading the manual, please call the generator helpline at 1-800-222-3136. System Ground The generator has a system ground that connects the generator flame components to the ground terminals on the AC output receptacles. The system ground is connected to the AC neutral wire (the neutral is bonded to the generator frame). See "Don't Overload Generator". Start generator and let engine electrical loads. Connect electrical loads in OFF stabilize position, before connecting then turn ON for operation. Special Requirements Turn There may be Federal or State Occupational Safety and Health Administration (OSHA) regulations, local codes, or ordinances that apply to the intended use of the generator. Please consult a qualified electrician, electrical inspector, or the local agency having jurisdiction. before • in some areas, generators are required to be registered with local utility companies. • if the generator is used at a construction site, there may be additional regulations which must be observed. Connecting System to a BuHding's electrical stopping loads OFF and disconnect from generator generator. Disconnect all electrical loads from the generator. Follow start instruction steps in numerical order: 1. Make sure unit is on a level surface. IMPORTANT: Failure to start and operate unit on a level surface will cause the unit not to start or shut down during operation. 2. Turn fuel valve to "On" position. Fuel valve handle should be vertical (pointing toward ground) for fuel to flow. Electrical Fuel Valve is shown Connections for standby power to a building's electrical system must be made by a qualified electrician. The connection must isolate the generator power from utility power, and must comply with all applicable laws and electrical codes. in the On position 3. Place choke lever in "Choke" position. 4. Set rocker switch to "On" position. , DANGER Necker Switch is shown in On position When using generator for backup power, notify utility company. Use approved transfer equipment to isolate generator from electric Use a ground circuit or highly conductive work. DO NOT touch utility. fault interrupter (GFCI) in any damp area, such as metal decking or steel bare wires 5. or receptacles. DO NOT use generator with electrical cords which worn, frayed, bare or other,,vise damaged. DO NOT operate generator are in the rain. DO NOT allow unqualified or service generator. persons or children IMPORTANT: If engine floods, place choke lever in "Run" position and crank until engine starts. 6. DO NOT handle generator or electrical cords while standing in water, while barefoot, or while hands or feet are wet. to operate Grasp recoil handle and pull slowly until slight resistance is felt. Then pull rapidly to start engine. Move choke lever to "Run" position a short distance at a time over several seconds in warm weather or minutes in cold weather. Let engine run smoothly before each change. Operate with choke in "Run" position. NOTE: If engine starts after 3 pulls but fails to run, or if unit shuts down during operation, make sure unit is on a level surface and check for proper oil level in crankcase. This unit may be equipped with a low oil protection device. Stopping the Engine 1. Unplug all electdcal loads from unit. NEVER start or stop engine with electrical devices plugged in and turned on. 2. Let engine run at no-load for two minutes to stabilize unit's internal temperatures. 3. 4. Move rocker switch to "Off" position. Move fuel valve to "Off" position. CAUTION Check the ratings of all extension cords before you use them. Extension cord sets used should be rated for 125 Volt AC loads at 20 Amps or greater for most electrical devices. Some devices, however, may not require this type of extension cord. Check the owner's manuals of those devices for the manufacturer's recommendations. Keep extension cords as short as possible, preferably less than 15 feet long, to prevent voltage drop and possible overheating of wires. ,_ • DO NOT stop engine position. by moving choke lever to "Choke" NEVER Connecting • • E_ectrica_ Loads Let the engine stabilize and warm up for a few minutes after starting. DO NOT connect 240 Volt loads to 120 Volt receptacles. • DO NOT connect 3-phase loads to the generator. • DO NOT connect 50 Hz loads to the generator. • Plug in and turn on the desired 120 Volt AC, single phase, 60 Hertz electrical loads. DO NOT OVERLOAD THE GENERATOR. See "Don't Overload Generator". • CAUTION CORD SETS AND RECEPTACLES Use only high quality, well:insulated, extension cords with the generator's 120 Volt electrical receptacles. amperage attempt to power than generator DO NOT overload Generator", a device the generator, 120 Volt AC, 15 Amp requiring or receptacle more can supply, See 'Don't Overload Dupmex Receptacle Each receptacle is protected against overload by a single 15 Amp push-to-reset circuit breaker. Use each receptacle to operate 120 Volt AC, single phase 60 Hz electrical loads requiring up to 1,800 watts (1.8 kW) at 15 Amps of current. COLD WEATHER OPERATION Under certain weather conditions (temperatures below 40°F [4°C] combined with high humidity), your Craftsman generator may experience icing of the carburetor and/or the crankcase breather system. To reduce this problem, you need to perform the following: 1. 2. Make sure generator has clean, fresh fuel. Open fuel valve (turn valve to open position). 3. 4. Use SAE 5W-30 oil (synthetic preferred, see page 6). Check oil level daily or after every eight (8) hours of operation. 5. 6. Change oil every 24 hours of operation. Shelter unit from elements. in an emergency, use the original shipping carton as a temporary shelter: 7. Cut off all carton flaps. 8. Cut out one long side of carton to expose muffler side of unit as shown. Ensure a minimum of two feet clearance between open side of carton and nearest object. Wind 9. Cut appropriate slots to access receptacles of unit. 10. Start unit, then place carton over it. NOTE: Remove carton when temperature is above 40°F [4°C]. For a more permanent shelter, build a structure that will enclose three sides and the top of the generator. 7. Make sure entire muffler-side of generator is exposed, as shown previously. 8. Ensure a minimum of two feet clearance between open side of structure and nearest object. 9. Face exposed end away from wind and elements. 10. Structure should hold enough heat created by the generator to prevent icing problem. 11. Start and run engine outdoors. 12. DO NOT start or run engine in enclosed area, even if doors or windows are open. 13. DO NOT enclose generator any more than shown. 14. Remove shelter when temperatures are above 40°F [4°C]. 15. Turn engine OFF and let cool two (2) minutes before refueling. DANGER Operate generator ONLY outdoors, Keep at least 2 feet of clearance on all sides generator for adequate ventilation, DO NOT operate enclosure, recreational Remove Muffler side exposed. Your unit may differ in appearance from that shown above. above generator including vehicle generator 40°F [4°C]. inside any building the generator of or compartment of a (RV), from shelter when temperature is DON'T OVERLOAD GENERATOR Capacity You must make sure your generator can supply enough rated (running) and surge (starting) watts for the items you will power at the same time. Follow these simple steps: 1. Select the items you will power at the same time. 2. 3. 6. Repeat steps 4 and 5 for each additional load. Refrigerator Deep Freezer Television Light (75 Watts) Rated (Running) Watts 1200 Additional (Running) Watts Additional Surge (Starting) Watts _=ssentials Light Bulb - 75 watt Deep Freezer Sump Pump Refrigerator/Freezer- 18 Cu, Ft, Water Well Pump Heating/Cooling AC - 10,000 Fan BTU Furnace Kitchen Fan Blower - 1/2 HP Coffee Surge Oven - 1000 Watt Maker Electric Stove Hot Plate (Starting) Watts 1800 - 1/3 HP Window Window Microwave Window Air Conditioner - Single Element 75 500 800 800 1000 500 1200 1600 2000 1200 300 800 1800 600 1300 1000 1500 1500 2500 Famimy Room 8OO 5OO 5OO 75 3075 Total Running Watts DVD/CD Player VCR Stereo Receiver 1600 5OO Color = 3075 Highest Additional Surge Watts = 1800 Total Generator Output Required = 4875 Television Personal monitor 1800 Highest Surge Watts Total Rated (Running) Watts - 27" Computer w/17" 100 100 45O 5OO 8OO Other Security System AM/FM Clock Radio Garage Electric Gallon Management To prolong the life of your generator and attached devices, it is important to take care when adding electrical loads to your generator. There should be nothing connected to the generator outlets before starting it's engine. The correct and safe way to manage generator power is to sequentially add loads as follows: 3. Again, permit the generator to stabilize. Tool or Appliance Estimate how many surge (starting) watts you will need. Surge wattage is the short burst of power needed to start electric motor-driven tools or appliances such as a circular saw or refrigerator. Because not all motors start at the same time, total surge watts can be estimated by adding only the item(s) with the highest additional surge watts to the total rated watts from step 2. Too! or Appliance 2. 5. Rated* Example: 1. Plug in and turn on the next load. NEVER add more loads than the generator capacity. Take special care to consider surge loads in generator capacity, as described above. Total the rated (running) watts of these items. This is the amount of power your generator must produce to keep your items running. Power 4. DIY/Job Site Quartz Haloqen Work Aidess Sprayer - 1/3 HP Rec_ Electric Miter Table Saw - 7 1/4" Saw - 10" Planer - 6" Table Saw/Radial Air Compressor Plug in and turn on the first load, preferably the largest load you have. Liqht Saw Drill - 1/2 HP Circular With nothing connected to the generator, start the engine as described in this manual. Door Opener - 1/2 HP Water Heater - 40 Arm Saw - 10" - 1-1/2 HP *Wattages listed are approximate appliance for actual wattage. Permit the generator output to stabilize (engine runs smoothly and attached device operates properly). 10 180 3OO 480 4000 1000 600 960 1000 1500 1800 1800 2000 2500 520 1200 960 1000 1500 1800 1800 2000 2500 only. Check tool or ENGtNE TECHNICAL INFORMATION PRODUCT This is a single cylinder, overhead valve(OHV), air cooled engine. It is a low emissions engine. Generator Specifications Rated Running Watts .......... Rated Surge Watts ........... Rated AC Voltage ............ Rated Maximum AC Current at 120 Volts ............... Rated Frequency ............. Phase ...................... Unit Weight ................. in the State of California, Model Series 120000 engines are certified by the California Air Resources Board to meet emissions standards for 125 hours. Such certification does not grant the purchaser, owner or operator of this engine any additional warranties with respect to the performance or operational life of this engine. The engine is warranted solely according to the product and emmisions warranties stated elsewhere in this manual. Power SPECIFICATIONS Engine The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision 200205). Given both the wide array of products on which our engines are placed, and the variety of environmental issues applicable to operating the equipement, it may be that the engine you have purchased will not develop the rated horsepower when used in a peice of power equipment (actual "on-site" power). This difference is due to a variety of factors including, but not limited to, the following: differences in altitude, temperature, barometric pressure, humidity, fuel, engine lubrication, maximum governed engine speed, individual engine to engine variability, design of the particular peice of power equipment, the manner in which the engine is operated, engine run-in to reduce friction and clean out of combustion chambers, adjustments to the valves and carburetor, and other factors. The power ratings may also be adjusted based on comparisons to other similar engines utilizedin similar applications, and will thereforenot necessarily match the values derived using the foregoing codes. 25.0 Amperes 60 Hz at 3600 rpm Single Phase 94 Ibs. Specifications Rated Horsepower ............ Bore ....................... Stroke ...................... Displacement ................ Spark Plug Type: ................. Ratings 3,000 Watts (3.0kW) 4,400 Watts (4.4kW) 120 Volts 6 at 3600 rpm 2.69 in. (68mm) 2.20 in. (56mm) 12.48 in. (206 cc) Champion RC12YC or Equivalent Set Gap To: ............ 0.030inch (0.76ram) Armature Air Gap: ............ 0.010-0.014 in. (0.25-0.36mm) Valve clearance with valve springs installed and piston I/4 in. (6 ram) past top dead center (check when engine is cold). intake ...................... 0.004-0.006 in. (0.I0-0.15 mm) Exhaust .................... 0.009-0.011 in. (0.23-0.28 mm) Fuel Capacity ................ 1 U.S. gallons Oil Type: Above 40 ° F ............... SAE 30 Below 40 ° F ............... SAE 5W-30 or 10W-30 11 MAINTENANCE SCHEDULE Follow the hourly or calendar intervals, whichever occurs first. More frequent service is required when operating in adverse conditions noted below. MABNTENANCE SCHEDULE FILL tN DATES AS YOU COMPLETE REGULAR SERVICE DATES SERVICE SERVICE MAINTENANCE TASK Check oil bvet Before Each Use Every 25 Hours or Every 50 Hours or Every 100 Hours or Yearly Yearly Yearly DATES Yearty x Change engine oil X 1 Service air cleaner X 2 × Service spark plug Service spark arrester Check valve clearance X Prepare for storage tf unit is to remain idte for longer than 30 days. Change oil after the first (5) operating hours and every 50 hours or every year, whichever occurs first, thereafter. Change sooner when operating under dirty or dusty conditions. Replace more often under dirty or dusty conditions. GENERAL RECOMMENDATIONS Check the cleanliness of the generator frequently and clean when dust, dirt, oil, moisture or other foreign substances are visible on its exterior surface. Regular maintenance will improve the performance and extend the life of the generator. See any authorized Sears dealer for service. The generator warranty does not cover have been subjected to operator abuse To receive full value from the warranty, maintain generator as instructed in this NOTE: DO NOT use a garden hose to clean generator. Water can enter the engine fuel system and cause problems. In addition, if water enters the generator through cooling air slots, some of the water will be retained in voids and cracks of the rotor and stator winding insulation. Water and dirt buildup on the generator internal windings will eventually decrease the insulation resistance of these windings. items that or negligence. operator must manual. Some adjustments will need to be made periodically to properly maintain your generator. All adjustments in this section should be made at least once each season. Follow the requirements in the "Maintenance Schedule" chart shown above. To C_ean the Generator • Use a damp cloth to wipe exterior surfaces clean. CAUTION NOTE: Once a year you should clean or replace the spark plug and replace the air filter. A new spark plug and clean air filter assure proper fuel-air mixture and help your engine run better and last longer. EMISSION DO NOT expose generator to excessive moisture, dust, dirt, or corrosive vapors. CONTROL Maintenance, replacement or repair of the emission control devices and systems may be performed by any non-road engine repair establishment or individual. GENERATOR DO NOT insert any objects through cooling slots. Use a soft bristle brush to loosen etc. MAINTENANCE Use a vacuum debris. Generator maintenance consists of keeping the unit clean and dry. Operate and store the unit in a clean dry environment where it will not be exposed to excessive dust, dirt, moisture or any corrosive vapors. Cooling air slots in the generator must not become clogged with snow, leaves,or any other foreign material. cleaner caked on dirt, oil, to pick up loose dirt and Use low pressure air (not to exceed 25 psi) to blow away dirt. Inspect cooling air slots and openings on the generator. These openings must be kept clean and unobstructed. 12 ENGINE MAINTENANCE CJeanlRepmace WARNING WHEN ADJUSTING GENERATOR OR MAKmNG REPAIRS TESTBNG Use approved DO NOT Checking check FOR spark ENGINE P_ug 2. Remove and inspect spark plug. 3. Replace spark plugs if electrodes are pitted, burned or porcelain is cracked. Use a recommended replacement plug. 4. Check electrode gap with wire feeler gauge and set spark plug gap to 0.030 inch (0.76mm) if necessary. TO YOUR Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug. WHEN Spark Change the spark plug every 100 hours of operation or once each year, whichever comes first. This will help your engine to start easier and run better. 1. Clean area around spark plug. SPARK plug tester. for spark with spark plug removed, \ OH LeveI Oil level should be checked prior to each use or at least every 5 hours of operation. Keep oil level maintained. Changing Engine OH 5. Change the oil after the first 5 hours of operation. Change oil every 50 hours thereafter. If you are using your generator under extremely dirty or dusty conditions, or in extremely hot weather, change the oil more often. Install spark plug and tighten firmly. NOTE: You can purchase a new spark plug by calling 1-800-366-PART. Service Air Cleaner Your engine will not run properly and may be damaged if you run it with a dirty air cleaner. CAUTION Replace the air cleaner every 25 hours of operation or once each year, whichever comes first. Replace more often if operating under dirty or dusty conditions. • Used motor oil has been shown to cause skin cancer in certain laboratory animals, • Thoroughly wash exposed areas with soap and water, To service the air cleaner, follow these steps: 1. Loosen screw and tilt cover down. KEEP OUT OF REACH OF CHILDREN. DON'T POLLUTE. CONSERVE RESOURCES. RETURN USED OIL TO COLLECTION CENTERS. CARTRIDGE Change the oil while the engine is still warm from running, as follows: 1. Make sure unit is on a level surface. . . 4. 5. BASE, COVER Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug. SCREW _ SLOTS AND TABS 2. Carefully remove cartridge assembly. Clean area around oil drain plug. The oil drain plug is located at base of engine, opposite carburetor. 3. To clean cartridge, gently tap pleated paper side on a flat surface. Remove oil drain plug and drain oil completely into a suitable container. 4. Reinstall clean or new cartridge inside cover. 5. Insert cover's tabs into slots in bottom of base. 6. Tilt cover up and tighten screw securely to base. Reinstall oil drain plug and tighten securely. Remove oil dipstick. 6. Slowly pour new oil into oil fill opening. Pause to permit oil to settle. Fill to "Full" mark on dipstick. DO NOT OVERFILL. Remove dipstick and check oil level. 7. Install oil dipstick. Tighten securely. 8. Wipe up any spilled oil. NOTE: You can purchase new air filter elements by calling 1-800-366-PART. 13 Carburetor NOTE: You can purchase a new spark arrester screen, P/N 399541, by calling 1°800°366°PART. if you think your carburetor needs adjusting, see your nearest Sears service center. Engine performance may be affected at attitudes above 3000z5000 feet. For operation at higher elevations, contact your nearest Sears service center. Spark Attester if you use your generator on any forestzcovered, brush-covered, or grass-covered unimproved land, it must have a spark attester. The spark attester must be maintained in good condition by the owner/operator. Service if the engine has been running, the muffler will be very hot. Allow the muffler to cool before servicing the spark attester. The engine exhaust muffler has a spark attester screen. The spark attester must be serviced every 50 hours to keep it functioning as designed. • Remove spark attester screen for cleaning and inspection. • Replace if screen is damaged. WARNING DO NOT Allow touch equipment hot surfaces. to cool before touching. In the State of California a spark arrester is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. If you equip the muffler with a spark arrester, it must be maintained in effective working order. 14 Change Oil While engine is still warm, drain oil from crankcase. Refill with recommended grade. Thegeneratorshouldbestartedatleastonceevery sevendaysandallowedtorunat least30minutes.If thiscannotbedoneandyoumuststoretheunitfor morethan30days,usethefollowinginformation asa guideto prepareitforstorage. Long Term Storage OHCylinder Bore _nstructions • Remove spark plug and pour about 1 ounce (30ml) of clean engine oil into the cylinder. • Install spark plug and crank slowly to distribute oil. it is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel filter, fuel hose or tank during storage. Also, experience indicates that abohoPblended fuels (called gasohol, ethanol or methanol) can attract moisture, which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. WARNING ;park plug removed. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Follow these instructions: Generator WARNING • Clean the generator as outlined on page 12 ("To Clean the Generator"). • Check that cooling air slots and openings on generator are open and unobstructed. Other Storage WHEN STORING FUEL OR EQUIPMENT WITH FUEL IN TANK Store away from furnaces, stoves, water heaters, clothes dryers or other appliances that have pilot light or other ignition source because they can ignite fuel vapors. WHEN DRA_NBNGFUEL OFF and let it cool at bast 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank. Drain fuel tank outdoors. Turn generator fuel away from sparks, open flames, and other ignition sources. DO NOT light a cigarette or smoke. Keep Tips • DO NOT store fuel from one season to another. • Replace your fuel can if the can starts to rust. Rust and/or dirt in your fuel will cause problems. • If possible, store your unit indoors and cover it to give protection from dust and dirt. BE SURE TO EMPTY THE FUEL TANK. • Cover your unit with a suitable protective cover that does not retain moisture. • Store generator in clean, dry area. WARNING pilot lights, heat, DO NOT Protect Fuel System • Remove all fuel from the fuel tank to prevent gum deposits from forming on these parts and causing possible engine malfunction. • Run engine until engine stops from lack of fuel. place Let equipment the cover 15 a storage cover over a hot generator. coot for a sufficient on the equipment. time before placing Problem Cause Correction 1. 1. Reset circuit breaker. One of the circuit breakers is open. Engineis running_ but no AC output is available. Engine runs good at no-load but "bogs down" when loads are connected. 2. Fault in generator. 2. Contact Sears service facility. 3. Poor connection or defective cord set. 3. Check and repair. 4. Connected device is bad. 4. Connect another device that is in good condition. 1. Short circuit in a connected load. 1. Disconnect shorted electrical load. 2. Engine speed is too slow. 2. Contact Sears service facility. 3. Generator is overloaded. 3. See "Don't Overload Generator". 4. Shorted generator circuit. 4. Contact Sears service facility. 1. Rocker Switch set to "Off". 1. Set switch to "On". 2. Fuel Valve is in "Off" position. 2. Turn fuel valve to "Open" position. 3. Dirty air cleaner. 3. Clean or replace air cleaner. 4. Out of gasoline. 4. Fill fuel tank. 5. Stale gasoline. 5. Drain gas tank and carburetor; fill with fresh fuel. Spark plug wire not connected to spark plug. 6. Connect wire to spark plug. 7. Bad spark plug. 7. Replace spark plug. 8. Water in gasoline. 8. Drain gas tank and carburetor; fill with flesh fuel. 9. Flooded. 9. Wait 5 minutes and re-crank engine. . Engine will not start; or starts and runs rough. Engine shuts down when running. 10. Excessively rich fuel mixture. 10. Contact Sears service facility. 11. Intake valve stuck open or closed. 1 1. Contact Sears service facility. 12. Engine has lost compression. 12. Contact Sears service facility. 1. Out of gasoline. 1. Fill fuel tank. 2. Low oil level. 2. Fill crankcase to proper level or place generator on level surface. 1. Load is too high. 1. See "Don't Overload Generator". 2. Dirty air filter. 2. Replace air filter. Engine lacks power. Engine "hunts" or falters. Carburetor is running too rich or too lean. 16 Contact Sears service facility. 17 RECTIFIER 6 E i ii F->>-ii_ 22-<<-_ ii POWER i> 22 --0 -Z E ] lib / lIB 18 120 VAC 15A <9 TO SCREW ON PANEL CAUTION !H OUTLET TAB MUST BE BROKEN lIA 11B 15A C,B, © ii _<POSITIVE BRUSH CLOSEST TO i BRUSHES 19 BEARING CRAFTSMAN 3000 Watt AC Generator Main Unit _ Exploded 580.323300 View 51 9OO \ \ i9 4 10 5 \ 8 12 27 11 13 \ \ 25 53 48 52 26 20 2O 17 / CRAFTSMAN Main Unit _ Item 1 2 3 4 5 6 8 9 10 11 12 13 17 19 20 21 23 25 26 27 31 32 33 34 48 51 52 900 3000 Watt AC Generator 580.323300 Parts List Part # E190341AGS 194150GS 81917GS 66365GS B2816JGS B2817AGS 96796GS * * 47480GS 67022GS 84242GS 93705GS 399541 B4986GS 194153GS 193646GS SRV66825DGS 74908GS 86308GGS 77816GS 91825GS 66849GS 96188AGS 14353621GS 93639GS 191775GS NSP Parts Not Illustrated AB3061BGS 191575GS 195309GS Description ASSY, Cradle KIT, Vibration Mount PIN, Roll, 4mm x 10 HOUSING, Engine Adaptor ASSY, Rotor ASSY, Stator WASHER, M8 Fiat WASHER, #10 Ext. Shakeproof HHCS, 5/16" x 3/4", SEMS HHCS, 5/16" - 24 x 7" GROMMET, Rubber GROMMET, Plastic RBC SCREW, Self Tap ARRESTOR, Spark DECAL, Ground KIT, Vibration Mount KIT, Grounding Hardware CARRIER, Rear Bearing TAPTFE, M5.08 x 10mm HHCS, M6- 1.0 x 100, SEMS DECAL, Caution Hot Muffler RECTIFIER, Brush & Bridge TAPTFE, M5 - .08 x 20mm ASSY, Control Panel (see page 20) WIRE, Ground DECAL, Danger DECAL, Start instructions ENGINE BOTTLE, Oil MANUAL, Owner's KIT, Decal * - items without part numbers are common fasteners and are available at local hardware stores. 21 CRAFTSMAN Contro_ 3000 Watt AC Generator Pane_ m E×p_oded View 580.323300 and Parts List \\ \ \ \ \ \ \ \ \ \ \ 4 \ \ \ \ \\\\\ \\\\\\ \\ \\ 2 Item 1 2 3 4 5 6 7 8 PaR # 96386GS * 94396AGS * 63025GS * * * Description COVER, Control Panel PPHMS, M4 0.7 x 10 CIRCUF BREAKER WASHER, #8 Shakeproof OUTLET, 120V, 15A Duplex WASHER, Flat, #8 WASHER, Lock, #8 NUT, Hex, M4 z 0.7 * z Items without part numbers are common fasteners and are available at local hardware stores. 22 ENGINE_ 6.0 HP, Briggs and Stratton, 120312 - Exploded View 1022 619 t034 830_ 3°® 40_ 306 307 240 332 22 742 _ 1_=_-- 415 15A @ 74g 23 ENGINE, 6.0 HP, Briggs and Stratton, 120312 - Exploded View 163 % 633 @ 108 137 365 % 276 @ 51 977 CARBURETOR GASKET SET 276@ 137 425 633A@ 163 633@ 968 12i CARBURETOR OVERHAUL KUT 445 g / 633A @ 633 @ lo4_ 163 51 358 Su/ ENGUNE 161 276 @ 163 GASKET SET 1022 51 12 287_ 868 {_ 524 163 24 ENGINE, 6.0 HP, Bnggs and Stratton, 120312 - Expbded View 334 652 890 1052 799_ 347 994i 346 1005 _ 58 2_ 190 455_ .... 332 _ 65 1095 VALVE GASKET SET 00,000),, 78 _ 10; 25 ENGINE, Item 1 2 3 5 7 11 12 13 15 15A 16 18 20 21 22 23 24 25 26 27 28 29 30 32 32A 33 34 35 36 37 40 45 46 51 55 58 59 60 65 78 95 97 98 104 168 109 117 118 121 122 125 127 130 133 134 137 146 155 161 163 186 187 187A 188 190 192 209 219 220 222 227 238 276 281 286 287 300 364 305 6,0 HP, Briggs Part # 699510 399269 299819 699486 698210 692600 699485 699482 691686 691682 699447 699596 692550 281658 699488 692987 222698 690021 694168 499631 692786 691866 499423 690124 692562 691664 695759 499642 499641 691304 691304 699661 692194 690977 693494 692555 691422 693389 805957 691915 699228 699205 691636 690024 398185 691242 692567 693628 691428 695042 696998 693749 698810 691739 691203 398187 398188 693981 690979 698214 699207 696024 692317 691050 692601 699230 699220 694543 693206 693578 691724 699590 692573 691300 271716 699639 698611 699629 693593 699598 699480 and Stratton, 120312 - Parts List Description Cytinder Assembty Kit-Bushing/Seal (Magneto Side) Seal-Oil (Magneto Side) Head-Cylinder Gasket-Cylinder Head Tube-Breather Gasket-Crankcase Screw (Cylinder Head) Plug-Oil Drain Plug-Oil Drain Crankshaft Cover-Crankcase Seal-Oil (PTO Side) Cap-Oit Fill Screw (Crankcase Cover) Ftywheel Key-Flywheel Piston Assembiy (Standard) Piston Assembty (.020" Oversize) Ring Set (Standard) Ring Set (.020" Oversize) Lock-Piston Pin Pin-Piston Rod-Connecting Dipper-Connecting Rod Screw (Connecting Rod) Screw {Conr_ecting Rod) Valve-Exhaust Vaivedntake Spring-Valve (intake) Spring-VaNe/Exhaust) Guard-Flywheel Retainer-Valve Tappet-Valve Camshaft Gasket-Intake (2 Required) Housing-Rewind Starter Rope-Starter Grip-Insert Grip-Starter Rope Screw (Rewind Starter) Screw (Flywheel Guard) Screw (Throttle Valve) Shaft-Throttle Kit-Idle Speed Pin-Float Hinge Valve-Choke Shaft-Choke Jet-Main (Standard) Jet-Main (High Altitude) Kit-Carburetor Overhaul Spacer-Carburetor Carburetor Plug-Welch Valve-Throttle Float-Carburetor Valve-Float Needle Gasket-Float Bowl Key-Timing Plate-Cylinder Head Base-Air Cteaner Gasket-Air Cleaner Connector-Hose Line-Fuel (Cut to Required Length) Line-Fuel (Formed) Screw (Control Bracket) Screw (Fuet Tank) Ball-Rocker Arm Spring-Governor Gear-Governor Washer (Governor Gear) Bracket-Control Lever-Governor Control Cap-Valve Washer-Sealing Paget-Control Module-Oil Sensor Screw (Oit Fitt Bracket) Muffier Housing-Blower Screw (Blower Housing) totem 306 307 332 333 334 337 346 347 356 356A 358 364 365 415 425 445 455 456 459 505 523 524 552 562 564 564A 597 601 604 608 613 615 616 619 632 633 633A 635 652 663 689 692 718 741 742 746 799 830 832 836 836A 842 847 851 868 883 890 914 914A 914B 957 958 968 971 972 975 977 993 994 1005 1022 1023 1026 1029 1034 1052 1095 1079 1210 1211 1305 26 Part # 693610 699483 699359 695711 699477 491055 690661 692599 695630 692602 699638 695693 699484 693463 699208 491588 692591 692299 281595 691251 693618 281370 692346 691112 699491 699492 691696 95162 697326 699394 699209 692576 692547 699230 693408 693867 691321 692076 699755 699206 691855 690572 690959 692565 692564 692566 699202 694544 693583 699632 699203 691031 693617 493880 692044 691893 790203 699481 692557 691686 694261 698180 692584 696370 694260 493640 696997 694088 399541 692592 691890 499924 693517 691230 691343 698674 698215 699202 498144 498144 691149 Description Shield-Cylinder Screw (Cylinder Shield) Nut (Flywheel) Armature-Magneto Screw (Magneto Armature) Plug-Spark Spark Arrestor Switch-Rocker Wire-Stop Wire-Stop Gasket Set-Engine Terminal-Oil Plug Screw (Carburetor) Plug Screw (Air Cleaner Cover) Filter-A/C Cartridge Cup-Flywheel Plate-Pawt Friction PawI-Ratchet Nut (Governor Control Lever) Dipstick Seal-Dipstick Tube Bushing-Governor Crank Bolt (Governor Control Lever) Screw (Control Cover) Screw (Control Cover) Screw (Pawl Friction Plate) Clamp-Hose Cover-Control Starter-Rewind Screw (Muffler) Retainer-Governor Shaft Crank-Governor Screw (Cylinder Head Plate) Spring/Link-Mechanical Governor SeaFChoke/Throttle Shaft SeaFChoke/Throttle Shaft Boot-Spark Plug Screw (Support Bracket) Screw (Control Panel) Spring-Friction Spring-Detent Pin-Locating Gear-Timing Ring-Retaining Gearddler Screw (Oil Sensor Module) Stud-Rocker Arm Guard-Muffler Screw (Muffler Guard) Screw (Muffler Guard) SeaI-O Ring (Dipstick Tube) Dipstick/Tube Assembly Terminal-Spark Plug Seal-Valve Gasket-Exhaust Bracket-Support Screw (Rocker Cover) (Bottom) Screw (Rocker Cover) (Top) Screw (Rocker Cover) (Sides) Cap-Fuel Tank Valve-Fuel Shut-Off Cover-Air Cleaner Screw (Air Cleaner Base) Tank-Fuel Bowl-Float Gasket Set-Carburetor Gasket-Cylinder Head Plate Arrester-Spark Fan-Flywheel Gasket-Rocker Cover Cover-Rocker Rod-Push Arm-Rocker Guide-Push Rod Sensor_Oit Module Gasket Set-Valve Screw (Flywheel Fan) Pulley/Spring Assembly (Pulley) Pulley/Spring Assembly (Spring) Screw (Oil Sensor) 27 Sears, Roebuck and Co., U.S.A. (Sears), the California Air Resources Board the United States Environmenta_ Protection Agency (U.S.EPA) (CARB) and Emission Contro_ System Warranty Statement (Owner's Defect Warranty Rights and Obligations) EMiSSiON CONTROL WARRANTY COVERAGE iS APPLICABLE TO CERTIFIED ENGINES PURCHASED iN CALIFORNIA iN 1995 AND THEREAFTER WHICH ARE USED IN CALIFORNIA, AND TO CERTiFiED MODEL YEAR 1997 AND LATER ENGINES WHICH ARE PURCHASED AND USED ELSEWHERE IN THE UNITED STATES (AND AFTER California Statement JANUARY 1, 2001 and U.S. EPA Emission Your Warranty Rights a. b. iN CANADA). c. d. Emission The 1995 and later small off-road two years. If any emission-related defective, the part will be repaired Owner's Warranty Warranty engines are warranted for part on your engine is or replaced by Sears. Responsibilities As the small off-road engine owner, you should however be aware that Sears may deny you warranty coverage if your small off-road engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications. Controt Defects provisions Warranty 1. Emission Warranted Warranty Provisions 6. 1-800-469-4663, valve Used in Above Length position, Systems time sensitive valves and assemblies of Coverage No Charge 5. relative to your Coverage. hotline, or pulse Items Warranty claims shaw be flied in accordance with the provisions of the Sears Warranty Policy. Warranty coverage shall be excluded for failures of Warranted Parts which are not origina! Sears parts or because of abuse, neglect or improper maintenance as set forth in the Sears Engine Warranty Policy. Sears is not liable to cover failures of Warranted Parts caused by the use of add-on, non-original, or modified parts. Maintenance and Parts a 24-hour system Miscellaneous and Coverage Excmusions Any Warranted Part which is not scheduled for replacement as required maintenance or which is scheduled only for regular inspection to the effect of "repair or replace as necessary" shall be warranted as to defects for the warranty period. Any Warranted Part which is scheduled for replacement as required maintenance shall be warranted as to defects only for the period of time up to the first scheduled replacement for that part. Any replacement part that is equivalent in performance and durability may be used in the performance of any maintenance or repairs. The owner is responsible for the performance of all required maintenance, as defined in this owner's manual. Coverage under this warranty extends only to the parts listed below (the emission control systems parts) to the extent these parts were present on the engine purchased. In the USA and Canada, maintenance information. converter manifold Claims You are responsible for presenting your small off-road engine to an approved Sears Service Center as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. The following are specific Emission Control Defects Catalytic Exhaust system 4. As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in this owner's manual. Sears recommends that you retain al! your receipts covering maintenance on your sma]! off-road engine, but Sears cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of al! scheduled maintenance. Sears System Repair or replacement of any Warranted Part will be performed at no charge to the owner, including diagnostic labor which leads to the determination that a Warranted Part is defective, if the diagnostic work is performed at an approved Sears Service Center. Coverage if you have any questions regarding your warranty rights responsibilities, you should contact a Sears Service Representative at 1-800-469-4663. ignition Catalyst Sears warrants to the initial owner and each subsequent owner that the Warranted Parts shall be free from defects in materials and workmanship which caused the failure of the Warranted Parts for a period of two years from the date the engine is delivered to a retail purchaser. 3. Defects Magneto Connectors 2. condition exists, Sears will repair your at no cost to you including diagnosis, Controt System Vacuum, temperature, and switches Your emission control system may include parts such as the carburetor or fuel-injection system, the ignition system, and catalytic converter. Also included may be hoses, belts, connectors and other emission related assemblies. Sears System plug(s) Air injection e. parts manifold Ignition Spark system and internal Fue! Pump Air Induction Air cleaner Intake Control Warranty and Obligations System start enrichment Carburetor The California Air Resources Board (CARB), U.S.EPA and Sears are pleased to explain the Emission Control System Warranty on your model year 2000 and later small off-road engine (SORE). in California, new small off-road engines must be designed, built and equipped to meet the State's stringent anti-smog standards. Elsewhere in the United States, new non-road, spark-ignition engines certified for mode] year 1997 and later, must meet similar standards set forth by the U.S.EPA. Sears must warrant the emission control system on your engine for the periods of time listed below, provided there has been no abuse, neglect, or improper maintenance of your small off-road engine. Where a warrantable small off-road engine parts and labor. Fuel Metering Cold Consequential Coverage Coverage hereunder shall extend to the failure of any engine components caused by the failure of any Warranty Part still under warranty. has a menu 28 of pre-recorded messages offering you product Emissions Durability Period and Air Information Engines On Your that are certified Resources display Board (CARB) information Engine to meet Emissions the California Tier 2 Emission regarding index Labe_ Air must Durability Period and Air Index. The engine manufacturer makes this information available to the consumer on emission labels. The Emissions hours of actual accordance compliant, assuming with the Operating The following categories Moderate: Engine 125 hours of actual proper engine Label 1,2000 (USEPA) 2 emission Phase Federal hours Engine for 250 hours of actual is certified engine running Engine 500 hours of actual For example, 20 to 25 hours Durability would The Air hdex Below time. displayed to be emission running walkobehind of an engine the engine requirements. Category C = 250 hours, has been C = 125 hours, B = 500 hours compliant lawn mower number for a specific the cleaner in graphical engine of this engine is 206 cc. is a generic found representation on a certified of the emission engine. for is used the engine. form describing family. rating the relative The lower This information on the emissions B = 250 and A = 1000 to 10 to 12 years. is a calculated to less than of 225 cc or more, the Emissions with an intermediate of shown For engines For engines to on the number time. per year. Therefore, level of emissions Air Index, engine a typical Period equate is certified indicates 2 certified referred compliant typically Extended: emission For phase Period to Agency hours. This engine has an intermediate rating with and Air Index of 2. The EPA Emissions compliance period is Category B. The for time. to be emission for which label will be certified Protection standards. and A = 500 hours. diplacement Intermediate: engines Compliance Compliance hours On Engine Environmental the Emissions 225 cc displacement, in Sears States meet Instructions. compliant certain meet the United Category to be emission running Compliance July operating are used: is certified Emissions the Emissions maintenance & Maintenance Period engines, Durability Period describes the number of running time for which the engine is certified to be emissions Compliance After Standards the Emissions Emissions the is label. FAMmLY:XX×XXo×X×XXX XXX×XX 29 label GARANTIA ........................................................... 30 REGLAS DE SEGURIDAD ............................. 31-32 CONOZCA SU GENERADOR ............................... 33 MONTAJE ....................................................... 34-35 FUNCIONAMENTO ........................................ 36-39 ESPECIFICACIONES ........................................... 40 GARANTIA SEARS le garantiza materiales y mano de compra original. al comprador LIMITADA original GENERADORES que el alternador de obra en los componentes Esta garanfia MANTENIMIENTO .......................................... 41-43 ALMACENAMENTO ............................................ 44 REPARACION DE AVERIAS ............................... 45 GARANTIA DEL SISTEMA DE CONTROL DE EMISIONES .............................................. 46-47 COMO ORDENAR PARTES ........ ULTIMA PAGINA y e! motor y pot el periodo CRAFTSMAN de su generador de tiempo port&til establecido principal 2 Athos(segundo ado despide s6!o) 1 AtSo Motor 2 A_os(segundo atSo despide solo) 1 A_o como El t_rmino un generador Durante dicho encontrada para periodo como los costos para los fines SEARS en examen reparara previo bujias de transporte representa todos Una vez el generador uso comercial perecederos Todos Comerciar' lucrativos. de garantia, defectuosa, los elementos SEARS. "Uso y para prop6sitos y filtros mos otros haya por SEARS, uso incluyendo comercial, alquHer, _ste ser_ construcci6n, considerado a su discreci6n, cualquier parte bajo uso y servicio normal**. Las baterias de aire, que se desgastan bajo garant{a, usos, tenido modificaciones incorrectas o no autorizadas, mantenimiento, confiabilidad. reparacion o almacenamiento incluyendo con el uso normal, el env{o ** DESGASTE NOR[VIAL: Como mal uso, negligencia, incorrecto con todos OTRAS GARANTiAS IMPLICiTAS, PARA GARANTIAS UN PROPOSITO EXPRESAS. INCLUYENDO, a la fabrica, PARTICULAR que haya sido de arranque no estan garantizados de ser necesario, CONSECUENCJALES, estados incidentales tNCiDENTALES servicio O ESPECIALES en la duraci6n o consecuenciales, por tanto las limitaciones derechos legales le otorga de servicio. Evidencia POR MEDIO de garantia de servicio de la fecha BAJO POR seran autorizado autorizado de compra SEARS SEARS. original deber& su funcionamiento el servicio no cubre ROEBUCK AND CO., Department 3O 817WA, TODAS LAS LA LEY. DE CUALQUIER LA DURACJON AL PERJODO ES EXCLUIDA DE TIEMPO POR DAIqOS DE LAS GARANTiAS. o la exclusi6n anteriormente mencionadas tener otros derechos, mas cercano. Esta garantia o limitaci6n podrian los cuales ser presentada Boffman de da_os no aplicarse cambian de El servicio de garantia puede ser no se podr& aplicar para servicio en en el momento de garantia. SEARS, y Y ADAPTACION LIMITADA LEGAL y reparaciones DESCONOCE implicitas, usted podria y servicio DE COMERCIALIZAC!ON CUALQUJERA o exclusiones y por de velocidad, necesitan DE LA PRESENTE de las garantias especificos; exceso negativamente Esta garantia A AQUELLAS PERMITJDO afecte mos motores condiciones. parte o motor. DESCONOCIDA, ESTA LA RESPONSABtLIDAD limitaciones Para servicio, visite su centro de servicio Ilevado a cabo Onicamente por un centro otros centros SEARS no permiten a usted. Esta garantia estado a estado. sobrecarga, de SEARS, mec_nicos, en buenas QtH de una AL EXTREMO accidente, a juicio SIN LIMITARSE, GARANTJA IMPLICITA QUE NO PUEDA SER ESPECIFICADO EN LA GARANTIA EXPRESA. Algunos que, los dispositivos reemplazo peri6dico de las partes para funcionar cuando emuso normal haya sobrepasado ta vida y de de de esta garantia. o reemplazara, realizado representa emuso dom_stico residencial donde la unidad sea usada como fuente responsabilidad del comprador y deberan ser pagados por anticipado. Esta garantia no cubre el mantenimiento normal y no se aplica a generadores, altemadores, motores o partes que hayan sido sujetos a instalaciones o NO EXISTEN en de la fecha COMERCIAL* AIternador * NOTA: Para prop6sitos de esta garantia el t_rmino "Uso del Cliente" emergencia pot parte de[ comprador original sin inc[uir ap[icaciones comercial a partir no es transferible. CLIENTE* potencia estar& libre de defectos a continuaci6n Estates, IL 60179 de solicitar el Este es el simbo[o lesion este simbo[o Lisez avec de aIerta para el personal. avec para evitar soin votre posib[es ce manuel g_n_rateur. appJications, de seguridad. Es usado Siga las instrucciones lesiones para indicarle de todos los situaciones mensajes ses limitations de despues de PEUGRO ses et les dangers potenciales que aparecen o muerte. et familiarisezovous Connaissez con peligros de seguridad qu°H imp[ique. El simbo[o palabra de a]erta (PELIGRO, mensaje de seguridad (_) es usado con una ADVERTENCIA, PRECAUCION), o una ilustraci6n, para alertarlo por escrito un acerca de cualquier situaci6n de peligro que pueda existir. PELIGRO indica un riesgo el cual, si no se evita, causar4 muerte o una herida grave. ADVERTENCJA el cual, si no se evita, puede grave. PREGAUGI6N indica indica Opere et generador SOLAMENTE la un riesgo NO opere et generador dentro de un edificio o lugar cerrado, incluyendo et compartimiento del generador en un vehicuto recreativo o RV. causar la muerte o una herida un riesgo, e! cual, si no se evita, puede causar heridas menores o moderadas. PRECAUOION, cuando se usa sin el simbolo de alerta, indica equipo. una situaci6n que podr[a Siga los mensajes los riesgos de heridas resultar de seguridad e inclusive E[ escape de[ motor elementos qu[micos California pot producir u otros daffos en el dado para evitar al aire libre. Mantenga al menos 2 pies de espacio tibre alrededor del generador, para ta adecuada ventilaci6n. PEUGRO del o reducir la muerte. de este producto contiene reconocidos en el Estado de c&ncer, defectos de nacimiento de tipo reproductivo. Cuando use un generador como poder de energia auxiliar, notifique a la compaffia de utitidades. Use el equipo de transferencia aprobado para aislar el generador de otra utilidad el6ctrica. ADVERTENCIA • Este generador no cumpte la norma 33CFR-183 del cuerpo de guardacostas de EE.UU. y no debe utilizarse en aplicaciones marinas. Use un interruptor para ta falla del circuito de tierra (GFC!) en cualquier area bastante hOmeda o que sea attamente conductiva, tales como terrazas de metal o trabajo hecho con acero. • El uso de un generador no homologado por cuerpo de guardacostas de EE.UU. puede provocar lesiones y da_os materiales. NO toque los alambres Simbolos de Peligro pelados o receptaculos. NO use un generador con cables electricos que est6n malgastados, rotos, pelados o daffados de cualquier forma. NO opere et generador y Significados bajo ta tluvia. NO maneje el generador o cables et6ctricos mientras est(_ parado en agua, descalzo o cuando las manos y los pies est6n mojados. NO permita que personas descalificadas sirvan al generador. Electrocutamiento Descarga Explosion Electrica Descarga o nWtos operen o Electrica Fuego CUANDO AJUSTE O HAGA REiPARACIONES A SU GENERADOR • Siempre desconecte et atambre de ta bujia y col6quelo no pueda entrar en contacto con la bujia. Gases Toxicos Superficie Caliente CUANDO PRUEBE LA BUJiA Utitice un comprobador NO comprueba 31 DEL MOTOR de bujias homotogado. la chispa sin la buj[a instalada. donde PRECAUCION ADVERTENCIA CUANDO ANADA DEP6SJTO COMBUSTIBLE O VACiE NO cambie ninguna vetocidad determinada. El generador suministra una frecuencia y un voltaje calificado cuando funciona a una velocidad determinada. EL Apague el generador (posici6n OFF) y dqeto enfriar al menos por 2 minutos antes de remover la tapa de ta combustible. Afloje la tapa lentamente para dejar que la presi6n salga del tanque. Uene o vade el dep6sito de combustible NO modifique al generador en ninguna forma. a la intemperie. NO ttene demasiado el tanque. Permita at menos espacio para la expansi6n del combustible. Mantenga la combustible atejada de chispas, llamas abiertas, pilotos, calory otras fuentes de ignici6n. Vea "No sobrecargue NO encienda un cigarritto o fume. Encienda su generador y deje que et motor se estabitice antes de conectar las cargas et6ctricas. CUANDO PONGA EN FUNCIONAMtENTO EL EQUIPO Conecte tas cargas el6ctricas en ta posici6n de apagado (OFF), tuego encienda (ON) para su operaci6n. Compruebe que ta bujia, et sitenciador, et tap6n del dep6sito de combustible y el filtro de aire estan instalados. Apague (OFF) tas cargas el6ctricas y desconectelas generador antes de parar et generador. NO arranque el motor sin ta bujia instalada. Si se ha derramado combustible, antes de arrancar el motor. CUANDO OPERE generador" en ta pagina 39. dei espere a que se evapore EL EQUIPO NO incline el motor o ei equipo, de tat manera que la combustible se pueda derramar. Este generador no es apto para el uso en equipos m6viles ni en aplicaciones marinas. CUANDO TRANSPORTE O REPARE Use el generador dise_ado. EL EQUIPO Si usted tiene alguna pregunta acerca de las finalidades de uso det generador, pregOntete a su concesionario o contacte a Sears. Transporte o repare el equipo con et tanque de combustible vacio, o con la vatvula para apagar el combustible, apagada (posici6n OFF). Desconecte CUANDO Opere et generador el cable de ta bujia. ALMACENE COMBUSTIBLE O GUARDE EL EQUIPO CON EN EL TANQUE Si los aparatos conectados se sobrecalientan, desconectetos det generador. Apague -Se -El -La NO toque tas superficies calientes. Permita que et equipo se enfde antes de tocarlo. En e! estado de California es obligatorio, segOn la ley, el uso de apagachispas (Secci6n 4442 del C6digo de POblicos de California). leyes similares. tierras federales. Si equipa apagachispas, este debera condiciones de trabajo. apagachispas a traves autorizado Sears. Otros estados Las leyes federales pueden se aplican en el silenciador con un ser mantenido en buenas Usted puede ordenar de su distribuidor nivetadas. NO inserte cuatquier objeto a trav6s de las ranuras de enfriamiento. ADVERTENCJA tenet solamente en superficies NO exponga aJ generador a una humedad excesiva, polvo, suciedad o vapores corrosivos. Almacene atejado de calderas, estufas, calentadores de agua, secadoras de ropa u otros aparatos etectrodom6sticos que posean pitotos u otras fuentes de ignici6n, porque eltos pueden encender los vapores de la combustible. Recursos solamente con ta finalidad para el cual rue el de servicio 32 apaguelos el generador si: pierde ta salida el6ctdca; equipo produce chispas, humo o emite llamas; unidad vibra de una manera excesiva. y CONOZCA SU GENERADOR Lea este manual del propietario y las reglas de seguridad antes de operar su generador. Compare las Hustraciones con su generador pare famHiadzarse con la ubicaci6n de los diferentes controles y ajustes. Conserve este manual pare referencias futuras. Tanque Interruptor de Marcha/Parado de Combustible Arranque Retroceso de \. Tapa del Deposito Paranca del Aceite del Cebador Depurador de Aire Tuerca Mariposa de Conexion A Tierra Tomacorrientes de 120 Voltios AC, 15 Amperios Arranque de Retroceso Cortacircuitos penetra posee sobrecargas son de] tipo 'oprimir de Aire Balanc[n (En) para darle (Apagado) Pamanca de[ arranque contra el motor. Tapa aquL un cortacircuito electricas. o Filtra e! aire de entrada a medida que o Debera al motor. para detener a un motor estar o Usada en [a posicion Co!6quelo un motor cuando del Aceite = Llene el motor 34 para las recomendaciones de Combustible de 1 gal6n americano Tornacorrientes Pueden arranque Cebador del Dep6sito Vea la p&gina Tanque para reposicionarL en e! motor. Interruptor "Off" para arrancar tomacorriente el generador Los cortacircuitos Depurador o Usado - Cada para proteger Cortacircuitos de 120 Voltios ser utilizados para el funcionamiento "On" aparatos en la posici6n especiales en funcionamiento. 15 Amperios se esta dando Tuerca consulte fr{o. tiene una capacidad sin contenido de plomo. AC, 15 Amperios para suministrar alimentaci6n de cargas e iluminaci6n AC, monofasica Mariposa competente. de] motor electrica electrica y herramientas, de 120 Voltios de 60 Hz. de Conexion con un electricista o el organismo 33 - El tanque de gasolina con aceite del aceite. A Tierra cualificado, o Si requiri6, un inspector electrico a PARA RETIRAR DE LA CAJA Abra con cuidado envio. Corte consumo superiores en el extremo a la inferior, de manera panel hacia abajo en forma material de protecci6n. Retire el generador Aceite que pueda plana, doblar despues comparando!o 3. parte Ilame a la Linea antes recomendado intento resultar agregue de hacer frecuencia SAE 30 en temperaturas el motor en una superficie de alrededor del tapon Quite la varilla de nuevo Vierta lentamente Haga pausas y compruebe aceite plana girar con un trapo el hive! de aceite. de Ilenado. que e! aceite Llene hasta NO AI_ADA la marca "Full" (lleno) ACEITE EN EXCESO. compruebe el nivel de aceite. se deposite. de la varilla de nivel. Saque la varilla y AL con la clasificaci6n API de servicio del motor, designado NOTA: Usted suministrado. SF, SG, SH, SJ o superior, con el peso SAE 30. NO use aditivos una viscosidad o arrancar de alta calidad, de acuerdo especiales. 5. a la tabla Vuelva NOTA: siguiente: despegue Temperaturas de Uso Esperadas 34 no puede a co!ocarla Revise e! aceite del motor. necesitar y ajOstela la en su posici6n. en la abertura para permitir y limpie de aceite. y limpiela y ajOstela e a su inadecuada de !lenado de nivel de aceite a colocarla a los sea mas dificil debido SitOe e! generador Vuelva inferiores que el arranque un el nivel de en fa!la del motor. aceite detergente Seleccione con mayor un utilice el aceite aceite al compartimiento utilice Onicamente 1. Cuando de Motor de que se haya depositado puede al normal. etc.) en ocasionara al 1o800o222o3136. Cualquier Cuando de 10W-30, (4°C) zona S&quela falta o esta da_ada, Aceite mMPORTANTE: aceite revise (4°C), ocasionara limpio. con la lista a del Propietario Agregue clasificado 2. 4. del Generador mayor multigrado, del motor. (5W-30, a los 40°F incluso que se desbiele lubricaci6n interna. de la caja de envio. ANTES DE DARLE ARRANQUE NOTA: el retire todo el de! Motor Manual el motor 40°F multigrado mayores de aceite ** Si utiliza Principal Si cualquier Ayuda de la caja de DE LA CAJA Revise todo e! contenido continuacion: Unidad aceite aceite de la caja de la parte y su contenido CONTENtDO * El uso de aceites temperaturas las tapas dos esquinas superior EL GENERADOR utilizar todo el aceite en su posici6n. frecuentemente durante e! Agregue 3. Gasomina Agregue lentamente gasolina regular ADVERTENCiA aproximadamente 1.5" por debajo del cuello del tuba de Ilenado. CUANDO ANADA "SIN tanque de combustible. Use un embudo se derrame. Uene el tanque lentamente PLOMO" al para evitar hasta de la parte que la cima COMBUSTIBLE Apague et generador (posici6n OFF) y d6jelo enfriar al menos por 2 minutos antes de remover ta tapa de ta combustible. Aftoje ta tapa lentamente para dejar que la presi6n salga del tanque. Ltene el dep6sito de combustible 4. a la intemperie. Instale la tapa gasolina NO ltene demasiado et tanque. Permita at menos espacio para la expansion det combustible. Mantenga la combustible atejada de chispas, llamas abiertas, pilotos, calory otras fuentes de ignici6n. jPRECAUCION! (gasoho!, etanol NO encienda un cigarritto o fume. provocar la separaci6n Este motor gasolina. escape: esta certificado Sistema de control EM (Modificaciones Utilice gasolina normal para funcionar de emisiones con de gases Limpie el area alrededor y nueva combustible, retire de la tapa de Ilenado la y e! motor de acidos acidos durante pueden de alcohol la humedad durante y el dalhar el circuito e! almacenamiento. de combustible con un cuando motor y dejelo combustible del la tapa. respecto, NUNCA utilice 35 productos limpiadores permanentes. vacios. Para obtener "Almacenamiento" en el dep6sito da6os de combustible, queden temporada. consulte e! circuito de la unidad durante hasta que los conductos y el carburador carburadores provocar el dep6sito funcionar nuevo la pr6xima vacie vaya a almacenar 30 dias o mas: Vacie minimo de 85 octanos. NO utilice combustible que contenga metano! ni mezcle aceite con combustible. 2. atraer y formaci6n Para evitar este tipo de problemas, limpia y limpie con mezcla pueden Los gases de combustible del motor). sin plomo, de combustible Los combustibles o metanol) almacenamiento. NOTA: 1. del tanque que se haya derramado. arranque e! de Utilice combustible mas informaci6n en la pagina 44. para motores de combustible, o ya que podrian a! COMO USAR SU GENERADOR SI TENE PROBLEMAS leer el manual, generadores Tierra operando por favor su generador Ilame a la linea Encienda despues de ayuda e_ Motor PREOAUCtON de para al 1_800o222o3136. del Sisterna El generador dispone de una conexion a tierra del sistema Vea "No sobrecargue generador" en ta pagina 3g. que conecta los componentes del bastidor a los terminales de tierra de los enchufes hembra de salida de CA. La tierra Encienda su generador y deje que el motor se estabitice antes de conectar las cargas el6ctricas. del sistema Conecte las cargas el_ctricas en la posici6n de apagado (OFF), tuego encienda (ON) para su operaci6n. esta conectada vez, esta conectado Requisitos al cable al bastidor que, a su Apague (OFF) tas cargas el6ctricas y desconectelas generador antes de parar el generador. Especiales Es posible que haya normas nacionales en materia aplicables de CA neutro del generador. u ordenanzas de seguridad al uso del generador. cualificado, un inspector locales e higiene Consulte electrico y Desconecte en e! trabajo con un electricista o e! organismo generadores zonas, es obligatorio en las compaSias registrar los electricas AsegOrese plana. de que la unidad IMPORTANTE: al Sisterna El_ctrico superficie y de parada de un 2. a efectos de alimentaci6n de reserva dei generador. Use paso por paso, est& en una superficie no se arranca se pueden durante producir y utiliza problemas en una de arranque el funcionamiento. Gire la valvula del combustible a la posici6n "On". El asidero de la valvula del combustible debe ser vertical hacia e! suelo) para el combustible para fluir. al Valvula sistema electrico de un edificio deben ser realizadas por un electricista cualificado. La conexion debe aislar la alimentaci6n del generador de la alimentaci6n de la red pOblica y debe cumplir las leyes y normas electricas todas Si la unidad plana, (seSalar Las conexiones electricas para encender, locales. Si el generador se utiliza en una obra, puede set necesario cumplir normas y requisitos adicionales. Conexi6n Edificio las cargas competente. 1. En algunas todas las siguientes instrucciones en orden numerico. del ,. del Combustible en posici6n "On" vigentes. PELIGRO 3. Coloque la palanca de choke en la posici6n "Choke". ._J 4. Coloque el interruptor Interruptor Cuando use un generador como poder de energia auxiliar, notifique a ta compa_ia de utilidades. Use et equipo de transferencia aprobado para aistar et generador de otra utilidad et6ctrica. 5. un poco y hale lentamente de resistencia. para encender hasta Luego hale el motor. IMPORTANTE: Si el motor se desborda, coloque la palanca estranguladora en la posicion "Run" e intente arrancar!o hasta conseguirlo. NO use un generador con cables etectricos que esten malgastados, rotos, petados o da_ados de cuatquier forma. bajo la Ituvia. 6. NO maneje el generador o cables electricos mientras est6 parado en agua, descatzo o cuando las manos y los pies esten mojados. NO permita que personas descalificadas sirvan al generador. de retroceso sentir rapidamente "On", 'On" la manilla que puede NO toque los alambres pelados o receptacutos. NO opere el generador Agarre a la posici6n Balancin en posici6n Use un interruptor para la falla del circuito de tierra (GFCt) en cualquier area bastante hOmeda o que sea altamente conductiva, tales como terrazas de metal o trabajo hecho con acero. balancin Mueva la palanca distancia o niSos operen o de choke clima calido, o algunos que ei motor corra Opere NOTA: una superficie cigOeBal dispositivo 36 plana es correcto. una en un antes de cada Deje cambio. "Run". despues de tirar tres veces funcionando, o si la unidad asegOrese y compruebe La unidad de protecci6n "Run" segundos en un clima frio. en la posici6n arranca pero no sigue para en funcionamiento, minutos suavemente con el choke Si el motor arrancador a la posici6n corta a la vez por algunos de que la unidad del se esta en que el nivel de aceite puede equiparse de bajo nive! de aceite. con un del Detener 1. e_ Motor Desconecte NUNCA electricos 2. todas arranque Revise las cargas o detenga conectados que el motor minutos unidad. para estabilizar Mueva e! interruptor 4. Gire la valvula funcione del motor a la posici6n 'Off" de Cargas Deje que el motor 'Off" despues Enchufe y encienda 120 Voltios, de la las cargas monofasicas (Apagado). trifasicas NO conecte cargas de 50 Hertzios los cordones caida y posible podrian Revise AC a no e! manual para ver las Io mas corto de 15 pies de largo recalentamiento NO sobrecargue el generador. Sobrecargue Generado¢'. por unos AC de 120 Volt AC, 15 Amp, Dob_es deseadas. a los tomacorrientes posible, para evitar la de los alambres. Cada recept&culo o el Consulte el apartado "No Recept_cu_os esta protegido en contra de, de! tipo "empuje de sobrecargas para reposicionar". a los tomacorrientes. al generador. GENERADOR. Generadof" dispositivos de extensi6n. de extension menos por un corto-circuitos NO SOBRECARGUE algunos preferiblemente de voltaje de 125 Voltios de los dispositivos NUNCA intente suministrar corriente a un dispositivo de amperaje superior al que puede suministrar el generador enchufe hembra. electricas cargas Sin embargo, de extension de extension en la posici6n "Choke" de 60 Hertzios NO conecte una capacidad para la mayoria este tipo de cordon Mantenga (Apagado). y se caliente de 240 Voltios tener o mayor las cordones de cordones del propietario de esos dispositivos recomendaciones de! fabricante. del arranque. NO conecte cargas de 120 Voltios. Sobrecargue requerir Elecricas se estabilice minutos internas dos de todos Los juegos deberan 20 Amperios electricos. durante las temperaturas a la posicion las capacidades de usarlos. utilizados con dispositivos sin carga • NO cotoque la palanca estranguladora para parar el motor. Conexion de la unidad. el motor a el y encendidos. Permita 3. electricas antes en la p&gina Vea 'No 39. JUEGOS DE CORDONES Y ENCHUFES CONECTORES Use L_nicamente cordones de extensi6n de alta calidad y bien aislados con los tomacorrientes electricos dobles de 120 Voltios de! generador. Use cada sencilla, receptacu!o de cargas 1,800 vatios juegos 37 (1.8 kW) a cordentes de cables 125 Voltios para operar 120 Voltios de 6OHz que requieren que son calificados AC, a 15 Amps AC, de fase hasta de 15 Amps. Use los para cargas (o mayores). de FUNCtONAM ENTO EN CLIMA En ciertas (temperaturas condiciones climaticas 4 ° C [400 F] combinadas FRiO inferiores 9. Corte las ranuras adecuadas tomacorrientes de la unidad, 10, Arranque encima. su generador Craftsman puede experimentar formaci6n de hie!o en e! carburador o el sistema de ventilaci6n del carter, Para NOTA: reducir 4 ° C [40 ° F]_ 1. AsegOrese nuevo 2. 4. 5. 6. realizar de que el generador tenga Io siguiente: combustible Abra la valvula (gire la valvula aceite pagina 34), 7. 5Wo30 SAE (se prefiere sintetico, Cambie el aceite funcionamiento. despues Proteja de la intemperie. la unidad original o despu6s la utilice como una protecci6n 7. Corte las tapas 8. Corte uno de los lados la caja de cart6n la temperatura mas permanente, los tres lados sea superior construya y la parte de que quede silenciador del generador, AsegOrese de que haya una separaci6n 60 cm (2 pies) entre de 9. de 10. la caja de carton co!oque AsegOrese objeto de cada 24 horas y despu6s la caja cuando que rodee a una superior del expuesto como el lado completo de! se muestra, e! lado abierto minima de de la estructura y el mas cercano, El extremo contraria En caso de emergencia, embalaje vease 8. Verifique el nivel de aceite diariamente cada ocho (8) horas de funcionamiento, a los generador. a la de abierto), Utilice Retire estructura de combustible la unidad Para una protecci6n y limpio, posici6n 3. es necesario acceso a con un alto nivel de humedad), este problema, para tener expuesto al viento La estructura debe estar situado en direcci6n y los elementos. debera conservar suficiente generador a fin de evitar problemas Arranque exteriores, e! motor calor de! de formaci6n de hie!o. de! 11, temporal. y mant6ngalo en marcha en de la caja. largos expuesto e! lado del silenciador muestra. AsegOrese de la caja de la unidad de que haya minima de 60 cm (2 pies) entre caja y el objeto mas cercano, 12, para dejar como se NO arranque ni mantenga el motor area cerrada, ventanas. aun cuando esten El generador se muestra, no debe en marcha abiertas en un puertas y una separaci6n el lado abierto 13, de la 14, Retire la protecci6n quedar cuando mas encerrado la temperatura de Io que sea superior a 4 ° C [40 ° F]. 15, Apague minutos el motor y d6jelo enfdar durante dos (2) antes de volver a abastecer de combustible. PELIGRO Opere et generador Lado del silenciador apariencia diferente expuesto, de como Su unidad se muestra puede tener SOLAMENTE al aire libre. Mantenga al menos 2 pies de espacio tibre alrededor del generador, para ta adecuada ventilaci6n. una NO opere et generador dentro de un edificio o lugar cerrado, incluyendo el compartimiento del generador en un vehicuto recreativo o RV. mas arriba. Retire la protecci6n cuando ta temperatura [40 ° F]. 38 sea superior a 4° C NO SOBRECARGUE GENERADOR Capacidad Usted debe suficiente carga vataje mismo (cuando al mismo proveer a los cuales tiempo. los aparatos puede este funcionando) para los aparatos la energia, Seleccione 2. que su generador calificado (al encender) proveer 1. asegurarse Siga estos que recibir&n y de que su generador eso aparatos Calcule minima de vatios necesitara. herramientas como, sierras de carga los motores e! vataje total de carga al Herramienta de Herramienta o es la cantidad al mismo se puede estimar momento, adicional obtenido en el paso 2. 1200 1800 8OO 1600 5OO 5OO Total Calificado Vataje de Carga Salida Total (cuando Adiciona! Requerida Control Receptor est6reo Televisor a color - 27 pulg. Computadora personal con monitor de 17 putg. Otros 1800 (Vatios de Carga mas alto) este funcionando) = 3075 mas alto = 1800 de! Generador = 4875 de [a Energia prolongar la vida conectados de su generador al mismo, se le affaden cargas electricas. a los tomacorrientes sea encendido. para controlar secuencias las cargas, correcta del generador, como Nada de! generador La forma la energia y los aparatos es muy importante cuidarlo deberia estar antes de que 2. Conecte Permita carga, en a continuaci6n: Sin tener nada conectado al generador, encienda motor de la manera descrita en este manual. la primera que funciona mismo trabaja la salida del generador suavemente preferiblemente se estabilice y el aparato del en considerar las del generador, como (suando est6 funcionand Vatios Adicionales de Carga (at la conectado 75 500 800 800 500 1200 1600 1000 2000 1200 1800 300 800 600 1300 1000 1500 1500 2500 100 100 45O 5OO 8OO 180 3O0 480 4000 Luz de hat6geno para trabajar Rociador sin aire - 1/3 HP Sierra intercambiabte Tatadro el6ctrice - 1/2 HP 1000 600 960 1000 1500 1800 1800 2000 1200 960 1000 1500 1800 1800 2000 2500 2500 circular - 7 _Aputg. ingtete- 10 pulg. de ptanificaci6n - 6 pulg. de mesa / sierra de brazo radial- 10 pulg. Compresor de aire - 1-1/2 HP HP = Caballo de fuerza. el *El vataje que aparece en la lista es solamente aproximada. Verifique la herramienta o aparato que usted tenga. motor que Sistema de seguridad Radio-Relo i AM/FM Abridor de garaje - 1/2 HP Calentador el6ctrico de agua - 40 galones Talier Sierra Sierra Mesa Sierra y mas segura 1. y encienda que es la de affadir se describe - 18 pies Cocina eiectrica - Elemento simple Calientaplatos Habitation Familiar Tocader de DVD/CD VCR 5OO 75 Total = 3075 Vatios para funcionar Vataje o Aparato Electrico Bomba de agua - 1/3 HP Ca[efacci6n / enfriamiento Aire Acond. de ventana - 10.000 BTU Ventflador de ventana Calefactor de caldera - 1/2 HP Cocina Homo de microondas - 1.000 Vatios Cafetera mas Vatios Adicionates de Carga (al encender) Luz (75 Vatios) adicional la capacidad especial segOn la capacidad Congelador industrial Bomba de aguas negras Refrigerador / congelador cObicos al affadir con e! vataje calificado, Aire Acondicionado de Ventana 3. sobre una atenci6n Esenciales Bombitta - 75 vatios (al encender) Vatios Catificados (cuando este funcionando) Refriqerador Congelador industrial TelevisiOn se estabilice. encender) con motores electricos, tales o refrigeradores, Debido a que aparato(s) Aparato EI6ctrieo mayor que el generador 4 y 5 para cada carga mas cargas Tome carga. Vatios Calificados* Ejemplo: su motor affada permita cargas de corriente se describe arriba. para encender se encienden alto, al total del vataje conectado Repita los pasos usted tenga. para mantener de carga necesaria o aparatos circulares el(los) producir El vataje no todos cuando De nuevo, la proxima adecuadamente. de electricidad, solamente debe funcionando la cantidad que usted esten y encienda tiempo. energia Para 5. 6. generador. pasos: la energia, Conecte NUNCA va a Totalice los vatios calificados (cuando este funcionando) de estos aparatos. Esta es la cantidad 3. el 4. para obtener (el al adecuadamente). 39 ei vataje verdadero. 520 una cantidad electrico INFORMACION Tg:CNICA SOBRE EL ESPECIFICACtONES PRODUCTO MOTOR El motor es de uno cilindros, refrigerado En e! Estado han obtenido Board de valvulas en cabeza (OHV), Especificaciones por aire y de baja emisi6n. de California, la certificacion (Consejo cumplimiento Potencia los motores de la serie 120000 del California Air Resources de recursos de aire de California) de la normativa sobre emisiones Potencia de Voltaje durante al rendimiento garantias del motor las emisiones de potencia establecen en primer (Procedimiento pequet'ios Automotive automocion). ambientales que pueden entre cuando factores: barometrica, motor, velocidad distintos mecanico rodaje motores variedad ajustar similares al aplicar de productos con un aparato se debe, de altitud, combustible, de! motor, modelo, la friccion utilizados disefio Vatios (4.4 kW) 120 Voltios ........... 25.0 Amperios .................. 60Hz a 3600 nominal ........................... 94 Ibs. del Motor ...................... 6 a 3600 ............. ....................... ................ ............. Entrehierro pulgadas) 56 mm (2,20 pulgadas) 206 cc (12,48 pulgadas) Champion Separacion a: ...... del inducido: RC12YC 0.030 o equivalente pulgadas ................. piston del equipo de la valvula (comprobar Admision Escape y el se pot Io mencionados. 0,25°0,36 mm de Gasolina de valvula pasado instalados e! punto y muerto en frio) 0,10-0,15 mm (0,004-0,006 pulgadas) 0,23-0,28 mm (0,009-0,011 pulgadas) ............ 1 galones americanos de Aceite Debajo 4O con el motor ........... Sobre que se pulgadas) .......... Capacidad Tipo con mue!les de 6 mm (0,25 superior las similares, (0.76ram) pulgadas) Holgura con otros con los valores rpm 68 mm (2,69 (0,010-0,014 del tambien rpm Monofasica otros, el motor, de las valvulas en aplicaciones los codigos de camisa Calibrar variaciones de las comparaciones necesariamente 4,400 temperatura, y limpiar de potencia (3.0 kW) Bujia mecanico entre lubricaci6n de hacer funcionar ajustes de Fuerza Diametro Tipo: su del mismo Caballos Desplazamiento que no Ilegar a desarrollar controlada of de el diferencias para reducir en funcion a 120 Voltios Nominal que Embarca Carrera a su funcionamiento, se utilice se de factores Esta diferencia etc. Los valores que no coincidira obtienen Peso y par de de ingenieros afectar de motor de la SAE (Society y la multitud manera de combusti6n, carburador, puede motores de! motor 2002-05) humedad, maxima utilizado, camaras y a J1940 de potencia puede real "in situ"). a los siguientes presion con el c6digo la amplia motores nominal de un mode!o Sociedad que ha adquiddo (potencia nominal Revision Dada nuestros .......... vatios ....................... Especificaciones lugar Engineers, AC 3,000 Fase ................................... al producto en este manual. de valoraci6n motores, potencia Las ................. Maxima Frecuencia Nominal Los valores motor Oti! del motor. exclusivamente que se declaran Potencia utilizan y a la vida ata_en del Generador de Sobretension Nominal Corriente 125 horas. Esta certificaci6n no supone para el comprador, el propietario o el usuario ninguna garanfia adicional en Io relativo M&xima DEL 40°F ............................. 40°F ................. SAE 30 SAE 5W-30 o 10W-30 PROGRAMA DE MANTENtMtENTO Siga los interva!os opere la unidad CALENDARIO horados o de calendario, en las condiciones !o que ocurra adversas descritas primero. Se requiere de servicio con mayor frecuencia cuando a continuaci6n. DE MANTENIMIENTO ANOTE LAS FECHAS INTERVALO CONFORME CUMPLA CON EL SERVICIO DE OPERACION POR HORA NORMAL FECHAS DE SERVICIO Cada TAREA Antes de DE MANTENIMtENTO Horas Cada o al Horas Afio Cada Uso Verificar el nivel de aceite 25 50 Cada 100 o al Horas o al A_o A_ho Afio X Cambiar el aceite del motor X t Servicio al filtro de aire X 2 Servicio a la bujia x Servicio al sistema de la bujia Comprobacidn de holgura de las valvulas Prepar almacenamiento 1 Si Eaunidad permanecera sin uso por mas de 30 dias Cambiar et aceite despu6s de las primeras (5) horas y despu6s cada 50 horas. Hacer el cambio de aceite con mayor frecuencia Remplazar mas a menudo bajo condiciones cuando trabaje en condiciones de mucha suciedad o polvo. de suciedad o polvo. RECOMENDACtONES GENERALES MANTENtMtENTO El mantenimiento e! rendimiento El mantenimiento peri6dico mejorara prolongara la vida 0til del generador. autorizado de Sears para reparar La garantia del generador sido sujetos al abuso e! valor completo mantener Se deberan de la garantia, para mantener el operador algunos correctamente unidad descrita ajustes limpia ambiente los elementos del operador. de la forma !levar a cabo y a un distribuidor la unidad. no cubre o negligencia e! generador Acuda Para debera deben de nieve, hojas peri6dicamente cuando su generador. los ajustes manual deberan de la seccion set hechos estaci6n. Cumpla de Mantenimiento" Servicio y Ajustes por !o menos NOTA: y reemplazar aire limpio adecuada una vida el filtro de aire. garantizan y ayuda limpiar Una bujia una mezcla a que su motor o reemplazar nueva la bujia y un filtro de mejor retenida devanado suciedad disminuira y tenga 0til mas pro!ongada. CONTROL estos DE EMtSIONES Cualquier establecimiento reparacion de motores o individuo especializado en la que no sean de automoci6n puede encargarse del mantenimiento, de los dispositivos y sistemas despejadas, expuesta como a del sin acumulaci6n extral_os. la limpieza de! generador polvo, suciedad, sean visibles NO recomendamos y limpie!o aceite, sobre humedad su superficie el uso de mangueras si el agua se introduce las ranuras de combustibleoaire funcione a estar o a vapores o exterior. de ]ardin para limpiar el generador. El agua podria introducirse sistema de combustible del motor y causar problemas. con los requisitos de la tabla "Programa descrita anteriormente. Una vez al a_o debera no vaya humedad la en un de este una vez en cada Ademas, NOTA: extra,as en mantener la unidad para aire de enfriamiento u objetos elementos consiste y almacene permanecer Revise frecuentemente substancias Todos suciedad, Las ranuras generador en este manual. Opere y seco donde de polvo, corrosivos. recibir de! generador y seca. limpio excesos que hayan DEL GENERADOR la sustituci6n y la reparaci6n de control de emisiones. 41 al generador para aire de enfriamiento, en los espacios vacios a traves algo del agua y grietas en el del aislamiento de1 estator y rotor. La acumulaci6n de agua en los devanados intemos del generador eventualmente la resistencia de! aislamiento devanados. de quedara del y de Para Limpiar e_ Generador Utilice un trapo exteriores. hOmedo Cambie e! aceite con el motor caliente despues funcionamiento, como se indica a continuacion: para limpiar las superficies 1. 2. 3. • NO exponga al generador a una humedad excesiva, polvo, suciedad o vapores corrosivos. • NO inserte cualquier objeto a trav6s de las ranuras de enfriamiento. Puede de cerdas suaves aceite, etc. usar una maquina suciedad Puede y residuos aspiradora para eliminar la suciedad. aire de enfriamiento aperturas para retirar la (que no exceda mantenerse no pueda Limpie la zona las ranuras limpias de alrededor en la base del motor, Quite de Ilenado el tapon en un recipiente para Haga aceite pausas Llene de nivel. NO A!_ADA y compruebe 7. Instale la varilla 8. Limpie los residuos arrancar la bujia NO comprueba Revisi6n Cambie nuevo en la abertura la marca ACEITE bien. de que e! aceite "Full" (lleno) se de la varilla EN EXCESO. de nivel de aceite Saque debera ser revisado de operacion. antes esta utilizando del motor despues o anualmente, y aprietela bien. _a Bujia 100 horas primero. de operacion Esto ayudara y a funcionar el area alrededor quemados o una vez al a su motor a mejor. de la bujia. la bujia. 4. Revise la bujia est&n picados, est& rota. Utilice una bujia recomendada. la separacion y ajuste (0.76ram) si los electrodos o si la porcelana de repuesto alambre dei electrodo la separaci6n con un calibrador a 0.030 pulgadas si es necesario. de cada uso o Conserve el nivel del su maquina de extrema caliente, de las primeras a partir lavadora suciedad o polvo, haga e! cambio 5 horas de ese momento. a presi6n 5. Si bajo cada 25 horas. • Et aceite usado del motor ha sido mostrado at cancer de la piel de ta causa en ciertos animales det laboratorio. • Completamente tavado expuso areas con el jab6n yet agua. MANTENGA FUERA DE ALCANCE NO CONTAMINE. CONSERVE VUELVA USADO ACEITE Instale la bujia y aprietela NOTA: Puede adquidr 1 oS00o366opART. o en un clima de aceite la de aceite. cada y revise y aprietelo de Aceite el aceite demasiado Reemplace de bujfas homologado. 5 horas y cada 50 horas, condiciones Retire 3. e! dem Nivem de_ Aceite cada Cambio 2. la chispa sin la bujia instalada. El nivel del aceite al menos aceite. Limpie todo el hive!l de aceite. mas f&cilmente 1. de A SU Siempre desconecte el alambre de la bujfa y cot6quelo donde no pueda entrar en contacto con la bujia. CUANDO PRUEBE LA BUJiA DEL MOTOR Utilice un comprobador y vacie para permitir hasta varilla Cambie REPARACIONES de aceite Vierta lentamente de vaciado a! otro lado de! adecuado. 6. aSo, Io que suceda O HAGA con la bujia. del tapon Vueiva a colocar el tapon de vaciado Quite la vari!la de nivel de aceite. Estas DEL MOTOR de esta y col6quelo en contacto aceite, situado carburador. deposite. y despejadas. de la bujia entrar Limpie/Reemp_ace CUANDO AJUSTE GENERADOR este en una superficie 5. los 25 psi) del generador. e! cable donde aceite para eliminar Inspeccione MANTENIMtENTO Desconecte Ilenado. y la apertura deberan 4. sueltos. usar aire a baja presi6n de que la unidad plana. PRECAUOION Puede usar un cepillo suciedad endurecida, AsegOrese de! DE NII_,JOS. los RECURSOS. A la COLECCION CENTRA. 42 nuevos firmemente. bujia al n0mero telef6nico de Servicio Su motor usted del Depurador no funcionara Io hace funcionar Suministre servicio adecuadamente y puede con un depurador al depurador Carburador de Aire daSarse si Si usted cree que su carburador necesita ajuste, visite su centro de servicio Sears m_fls cercano. El funcionamiento dei de aire sucio. motor de aire una vez cada 25 horas bajo condiciones encuentran de mucha suciedad disponibles en su centro de servicio Para dar servicio aJ filtro detallan a continuaei6n: 1. Af!oje el tomillo o polvo. Los repuestos de aire, y quite siga que Servicio se afectado a altitudes por encima de a elevaciones mayores, de servicio Sears mas del Apagachispas El silenciador apagachispas. de! escape del motor Debera suministrarle apagachispas condiciones la cubierta. Cartucho resultar cercano. se local Sears. tos pasos podria 3000-5000 pies. Para operaciones pongase en contacto con el centro de operacion o una vez por a_o, !o que suceda primero. Suministre servicio mas frecuentemente si la unidad funciona Base posee una pantalla servicio al cada 50 horas para conservarlo de funcionamiento. en buenas ADVERTENCIA Cubierta l TomiiIo 2. Remueva 3. Para Las Etiquetas y las Ranuras _ cuidadosamente limpiar el cartucho, de papel plegado sobre golpee ligeramente una superificie de cartucho nuevo su costado firme. o limpio En el estado de California es obligatorio, segOn uso de apagachispas (Secci6n 4442 del C6digo la ley, e! de Recursos pueden tener Reinstale el juego la cubierta. 5. Inserte las leng0etas de la cubierta en las ranuras se encuentran en el fondo de la base. 6. Coloque la cubierta en su lugar firmemente a la base. debajo de POblicos tierras federales. Usted puede comprar los elementos Ilamando al 1oS00o366oPART. condiciones que NOTA: el tornillo este debera puede por parte tendra debera ha estado caliente. darle Retire e! silenciador ser mantenido comprar en buenas los apagachispas que tenet un apagachispas cubiertos de monte, set mantenido maleza en buenas funcionando, nuevos, servicio la panta!la Remplace P/N si Io usa en o pasto. condiciones el silenciador Deje que el silenciador estara se enfrie para al apagachispas. dei apagachispas inspecci6n. 43 en con un del propietario/operador. Si el motor bastante se aplican al !oS00o366opART. no tratados apagachispas poder Si equipa Ilamando El generador terrenos Otros estados Las leyes federales de trabajo. Usted 399541, de! filtro de aire de California). leyes similares. apagachispas, y apriete catientes. Permita que el equipo se enfrfe antes de tocado. e! cartucho. 4. NOTA: nuevos NO toque las superficies la pantalla si esta da_ada. para limpieza e El GENERALIDADES El generador siete dias debera y debera 30 minutos. unidad como ser encendido dejar!o Si no puede para preparar al menos funcionar hacer por m&s de 30 dias, guia Cambio al menos use la siguiente su unidad Con el motor una vez cada la informacion Aceite eJ Di_metro Quite las partes evitar que se formen esenciales del sistema para dep6sitos de goma de combustible, como filtro de combustible, manguera o tanque de durante el almacenamiento. Tambien, la experiencia indica que los combustibles (llamados humedad, gasohol, con mezclas etanoJ o metanol) la cual Ileva a la separaci6n acidos durante e! almacenamiento. daBar el sistema de combustible drene e! aceite con el grado Interior de la caja del de aceite del CiHndro Coloque aceite. y vierta de motor la bujia aproximadamente limpio en e! interior y arranque 30 ml (1 onza) del cilindro, lentamente para distribuir el el de pueden y formacion la bujia de aceite en carburador, combustible, alcohol caliente, a Ilenarla para almacenamiento. Instrucciones de Almacenamiento Pedodos Prolongados Es importante todavia cigOe_al. Vuelva recomendado. durante esto y debe almacenar de Aceite atraer de El gas acido puede de un motor durante su Je el motor sin la bu ia instatada. almacenamiento. Generador Para evitar problemas del motor, debera desocuparse 30 dias o re&s. Siga estas antes el sistema de combustible de un almacenamiento de instrucciones: ADVERTENCIA Limpie el generador ('Para Limpiar Revise que las ranuras aperturas como esta descrito en la p&gina 42 el Generador"). para el aire de enfriamiento del generador se encuentren abiertas y las y despejadas. Otras Sugerencias Almacenamiento NO almacene CUANDO ALMACENE COMBUSTIBLE O GUARDE EL EQUIPO CON Reemplace EN EL TANQUE AImacene atejado de calderas, estufas, calentadores de agua, secadoras de ropa u otros aparatos eiectrodom6sticos que posean pitotos u otras fuentes de ignici6n, porque eltos pueden encender los vapores de la combustible. CUANDO VACiE EL DEP6SlTO DE COMBUSTIBLE oxidarse. El 6xido causara problemas. Si es posible, de una estaci6n de gasolina y/o la suciedad almacene su unidad a otra. si comienza a en la gasolina le en un recinto encerrado y cObrala para protegerJa del polvo y la suciedad, ASEGURESE DE VACIAR EL TANQUE COMBUSTIBLE. Apague el generador (posici0n OFF) y d6jeto enfnar al menos por 2 minutos antes de remover la tapa de ta combustible. Afloje la tapa lentamente para dejar que la presi6n salga del tanque. Vacie el depSsito de combustible gasolina la caneca para el Cubra a ta intemperie. Mantenga la combustible alejada de chispas, llamas abiertas, pilotos, calory otras fuentes de ignici6n. su unidad con una cubierta adecuada que no retenga AImacene e! generador DEL de proteccion humeda& en un area limpia y seca. ADVERTENCIA NO encienda un cigarrilto o fume. Proteja el Sistema de Combustible Retire toda la gasolina evitar que se formen y causen posible del tanque dep6sitos de goma real funcionamiento Haga funcionar el motor falta de combustible. de combustible NO coloque una cubierta encima de un generador para en estas Deje que la unidad se enfrie to suficientemente coloque ta cubierta. partes del motor. hasta que se detenga pot la 44 caliente. antes de que le Problerna Causa Soluci6n Uno de los cotacircuitos abierto. El motor existe est_ salida E! motor funcionando pero funciona bier sin Falla en e! generador, 3, Mala conexi6n defectuoso, 4, cargas 3. Revise El dispositivo real estado. conectado esta en 4. Conecte otro dispositivo en buenas condiciones, Corto circuito conectada, en la carga 2, La ve!ocidad lenta. del motor es muy 2. Pongase en contacto con la Planta de Servicio de Sears. 3, El generador esta sobrecargado, 3. Vea "No Sobrecargue 4, Circuito 4. Pongase en contacto con la Planta de Servicio de Sears. las de! generador Valvula balancin en "Off", a la Coloque 2. "Off", 3, Depurador 4, 5, 6, El alambre conectado, Sin gasolina, 4. Llene el tanque Gasolina 5. Drene el tanque con combustible 6. Conecte de la bujia no esta de gasolina; fresco. Ilenelo a la bujia, Reemplace 8. Drene el tanque con combustible 9, Exceso de cebado, 9. Espere motor. Mezcla de combustible 10. Pongase en contacto con la Planta de Servicio de Sears. 1. Pongase en contacto con la Planta de Servicio de Sears. 12. Pongase en contacto con la Planta de Servicio de Sears. 2, rica, de toma atascada posici6n abierta o cerrada, El motor ha perdido en la compresion. Nivel de aceite la buj[a. de gasolina; fresco. 5 minutos Llene el tanque insuficiente. 2. es muy alta. y haga Ilenelo girar el dei combustible. Llene el carter correcto hasta e! nive! o sitOe el generador en plana, Vea "No Sobrecargue Generador", potencia, 2, "no de combustible. 7. en la gasolina, La carga continuamente" el depurador el alambre una superficie E! motor a la Bujia en real estado. funcionamiento, fa[ta (En). Agua Sin gasolina, [e hace en "On" 8, 12, A[ motor Generador", 7, 1, Valvula en pleno en del combustible Limpie o reemplace de aire, vieja, electrica "On'L 3. excesivamente se apaga el interruptor Gire la v&lvula posici6n de aire sucio, la carga que este y 10, El motor y repare, Desconecte corto, en corto. del combustible posici6n o arranoa P6ngase en contacto con la Planta de Servicio de Sears. de cordones 2, no arranca; real 2. o juego interruptor E[ motor funciona Reajuste el cortacircuito. no de A¢ disponibJe. pero °'funciona real" cuando cargas son oonectadas. 2_ est& funciona o se detiene, Filtro de aire sucio, 2. Carburador con mezcla combustible muy rica o muy pobre. 45 de aireo Reemplace P6ngase Servicio el filtro de aire, en contacto de Sears. con la Planta de Sears, California, Roebuck CARB, and Co., U.S.A. (Sears), pot sus sig[as en ingles) Ambienta[ Dec[araci6n (derechos California y United Air Resources Board (Consejo States Environmental Protection de EE.UU., EPA, de garantia y obHgaciones por sus de[ sistema de[ propietario LA COBERTURA DE LA GARANT[A DE CONTROL DE EMISIONES APLICA A LOS MOTORES CERTIFtCADOS ADQUtRIDOS EN UNJDOS (Y A PARTIR DEL 1o DE ENERO de control SE sobre el control de emisiones a de _a EPA de c. Los motores una garantia contra defectos en e[ control pequefos para exteriores modelos 1995 y posteriores de dos aries. Si alguna parte de su motor relacionada [as emisiones est_ defectuosa, Responsabilidades Sears del propietario la reparara d 3. de Partes tienen con Colector de entrada. Sistema de igrfici6n. Sistema de ignici6n Sistema catalizador. pot magneto catalftico. de inyecci6n Distintos elementos de aire o v_lvula utilizados Vigeneia pot impulsos. en los sistemas de vacio, anteriores temperatura, 5. y de y conjuntos. de la eobertura No habrA cargos Rec[amos y exc[usiones se realiza en de cobertura Mantenimiento Cualquier parte garantizada cuyo reemplazo no est_ programado como mantenimiento requerido o que est_ programada Onicamente para inspecci6n frecuente con et fin de "reparar o reemplazar conforme sea necesario", estar_ garantizada en cuanto a defectos pot el periodo de [a garantfa. Cuaiquier parte garantizada cuyo reempiazo est_ programado como mantenimiento requerJdo tendr_ so[amente una garantia contra defectos 0nicamente pot el per[ode hasta el primer reempiazo programado para esa parte. Se podra utilizar cualquier parte de repuesto que tenga un rendimiento y durabilidad equivalentes, aJ realizar cualquier actividad de mantenimiento o reparaci6n. El propietario es responsable de realizar todo el mantenimiento requerido, seg0n se define en este manual del propietario. con un en et control con una }inca de emergencia de productos. posici6n Los rec[amos vincuiados con Ja garant[a se presentaran conforme a [as disposiciones de la P6Jiza de garantJa de Sears. La cobertura de [a garantfa se excluira para aquellas fallas de partes garantizadas que no sean partes odgina[es de Sears o debido a abuse, descuJdo o mantenimiento incorrecto_ segQn se establece en {a P61iza de garantfa de motores de Sears. Sears no es responsabJe pot la cobertura de fa[las de partes garantizadas ocasionadas pot el uso de partes adiciona[es, no originales o modificadas. 6. garantizadas y Canada contamos sobre mantenimiento de aire. garantizada esta defectuosa, si la labor de dJagn6stJco un Centro de servicio Sears aprobado. Cobertura cons[guiente La cobertura bajo la presente se ampliar_ a [a fa[la de cuaiquier componente del motor provocada pot un desperfecto en cualquier parte garantizada que siga gozando de la cobertura de la garantia. La cobertura bajo esta garantfa inciuye solamente aquellas partes que se enumeran a continuaei6n ([as partes del sistema de control En EE.UU. informaci6n en frio. La reparaci6n o reempJazo de cualquier parte garantizada se realizar& sin cargo a[guno para el propietario, incluyendo la mano de obra de dJagn6stico que derive en la determinaci6n de que una parte Las siguientes son disposiciones espec[ficas relacionadas con la cobertura de la garantfa contra defectos en el control de emisiones. 1 para arranque Sears garantiza al propietario inicial y a cada propietario subsiguiente que las partes garantizadas estar&n libres de defectos en material yen mano de obra, que ocasionen fallas de las partes garantizadas durante un periodo de dos afos a partJr de la fecha en que el motor sea entregado al comprador minorista Usted es responsable de presentar su motor pequefio para exteriores a un Centre de servicio Sears aprobado tan pronto como se presente et problem& Las reparaciones bajo garanga deberan concluirse en un per[odo razonable_ que no exceder_ de 30 d[as defectos de inducci6n Conectores 2. Come propietado del motor pequefio para exteriores, usted siempre debe tener en cuenta que Sears podr_ negar la cobertura de la garantfa si su motor pequeffo para exteriores o una parte de[ mismo presenta failas debido a abuse, descuido, mantenimiento incorrecto o modificaciones no aprobadas contra de combustible V_lvulas e interruptores detecci6n de tiempo. para la garant[a de Sears Sistema Sistema e 4. de la garant[a de enriquecimiento hayan estado CoJector de escape Como propietario del motor peque_o para exteriores, usted es responsable de reafizar las actividades de mantenimiento requefidas que se indican en este manual del propietado. Sears recomienda que conserve todos los recibos que cubran eI mantenimiento de su motor peque_o para extedores_ pero Sears no puede negar la garantfa solamente per la falta de recibos ni per su imposibilidad de garantizar la rea[izacidn de todas [as actividades de mantenimiento programadas. Disposiciones de emisiones de medici6n Sistema Convertidor o sustituir& Si tiene alguna pregunta con respecto a sus derechos y responsabilidades para la garanga_ p6ngase en contacto representante de servicio Sears a[ 1-800-469-4663. Sistema partes Bujias. Cuando exista una condici6n que pueda ser cubierta por la garant[a, Sears reparar_ el motor pequefio para extedores sin costo alguno, inciuyendo el diagn6stico, [as partes de repuesto y la mano de obra. de Sears defectos) Fi[tro de aire. Su sistema de control de emisiones podra inciuir partes como el carburador o el sistema de inyecci6n de combustible, el sistema de ignici6n y e[ convertidor cata[itico. Tambi6n se pueden inc[uJr mangueras, correas, conectores y otros componentes relacionados con las emisiones de la garant[a contra Carburador y partes internas. Bomba de combustible. DE El California Air Resources Board (CARB)_ la EPA de EE.UU. y Sears se complacen en expficar la Garant[a para el sistema de control de emisiones para motores pequefios para exteriores (SORE) modetos afo 2000 y posteriores. ER California, los nuevos motores pequefios para exteriores se deben disefar, construir y equipar para cumplir con las estrictas normas del estado contra e[ smog. En otras regiones de Estados Unidos_ los nuevos motores para interiores de ignici6n per chispa certiflcados para modelos afro 1997 y posteriores deben cumplir con normas simHares establecidas pot la EPA de EE.UU Sears debe garantizar el sistema de control de emisiones de su motor para los periodos indicados a continuaci6n, siempre y cuando no se haya abusado_ descuidado o dado mantenimiento incorrecto a[ motor pequefo para extedores. Cobertura emisiones de emisiones de emisiones) en la medida que dichas presentes en e[ motor adquirido. b Deciaraci6n de garant[a EE.UU. y California, en ingles). para [a garant[a CALIFORNIA EN 1995 Y POSTERtORMENTE, QUE SE UTILICEN EN CALIFORNIA, Y A MOTORES CERTIFtCADOS MODELO 1997 Y POSTERIORES QUE SEAN ADQUIRJDOS Y UTILIZADOS EN OTRA REGION DE ESTADOS 2001, EN CANADA) sig[as de Recursos sobre e[ Aire de Agency (Agencia de Protecci6n las 24 horas (1-800-469-4663), 46 que ofrece un men0 de mensajes pregrabados con Jnformaci6n Sobre emPeriodo de Durabilidad de mas Emisiones y e_ indice de Aire en _a Etiqueta de Emisiones de_ Motor Periodo de Cump_imiento de _a Normativa de Emisiones en ia Etiqueta de CumpHmiento de Emisiones dem Motor Los motores con certificaci6n de cumplimiento de la normativa sobre emisiones de nivel 2 del California Air con la certificacion de cumplimiento de la fase 2 de las normas sobre emisiones de la United States Environmental Resources Protection Agency protecci6n del medioambiente Board (CARB) deben mostrar informaci6n Desde sobre el 1 de julio de 2000, algunos (USEPA, Agencia motores Sears estadounidense ). En e! caso con certificaci6n de fase 2, el periodo de cumplimiento consumidor mediante normativa emisiones en la etiqueta El Per[odo de DurabHidad n0mero de horas funcionar que se realicen detallan utilizan de [as Emisiones durante cumpliendo las cuales las normas las operaciones en las instrucciones las siguientes Moderado: normativa de emisiones. cumplir siempre de uso y mantenimiento. 250 Se para cumplir 125 horas de la sobre Para emisiones. A continuaci6n la etiqueta con un indice de la normativa ProJongado: El motor esta certificado para cumplir normativa sobre emisiones durante 500 horas de B. El motor una representaci6n tipica de un motor generica certificado. la real. Pot ejemplo, un cortacesped utilizar entre DurabiHdad 20 y 25 horas al aSo. Por tanto, el Periodo de las Emisiones de un motor con clasificaci6n intermedia de Aire equivaldria de emisiones Cuanto menor de una gama es el indice se presenta de Aire, a pie se suele a 10-12 es un valor calculado relativo Esta informacion de emisiones. con operario concreta gr&fica el nivel de motores. mas limpio en forma de aSos. que indica es el motor. en la etiqueta FAMmLY:XXXXX.XXXXXX XXXXXX 47 B = y A = 1000 horas. es intermedia, de cumplimiento se muestra de emisiones Para de 225 cc o mas, sobre emisiones de la EPA es de categoria una cilindrada de 206 cc. la de la de C = 125 horas, motores B = 500 horas de este motor de aire de 2. El periodo real. funcionamiento federales de 225 cc, Categoria C = 250 horas, La clasificacion real. funcionamiento de menos horas y A = 500 horas. Categoria categorias: que figura de emisiones indica el nOmero de horas de durante las cuales el motor ha demostrado los requisitos motores que se Intermedio: El motor esta certificado para cumplir normativa sobre emisiones durante 250 horas de El indice cumplimiento funcionamiento e! puede emisiones, de mantenimiento El motor esta certificado sobre emisiones durante funcionamiento el motor sobre indica sobre de de los motores el periodo de durabilidad de las emisiones y el indice de aire. El fabricante de! motor ofrece esta informaci6n al etiquetas cuentan tiene de Your Home For repair - in your home - of all major brand appliances, iiiiiiiiiiiiiiiiii!_ _¸_ lawn and garden equipment, or heating and cooling systems, iiiiiiiiiiiiiiiiiii no matter who made it, no matter who sold it! iiiiiiiiiiiiiiiiiii For the replacement parts, accessories and iiiiiiiiiiiiiiiiiii owner's manuals that you need to do-it-yourself. iiiiiiiiiiiiiiiiiii For Sears professional installation of home appliances iiiiiiiiiiiiiiiiiii and items like garage door openers and water heaters. iiiiiiiiiiiiiiiiiii 1-800-4-MY-HOME ® Anytime, day or night iiiiiiiiiiiiiiiiiii (1-800-469-4663) (U.S.A. and Canada) iiiiiiiiiiiiiiiiiii www.sears.com www.sears.ca iiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiii Our Home iiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiii For repair of carry-in products like vacuums, lawn equipment, !!!!!!!!!!!!!!!!!!! and electronics, call or go on-line for the nearest Sears Parts and Repair Center. iiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiii 1-800-488-1222 Anytime, day or night (U.S.A. only) iiiiiiiiiiiiiiiiiii www.sears.com iiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiii To purchase a protection 1-800-827-6655 agreement on a product (u.sA.) 1-800-361-6665 Para pedir servicio de reparaci6n a domicilio, y para ordenar piezas: 1-888-SU-HOGAR serviced by Sears: (Canada) Au Canada pour service en franq.ais: 1.800.LE.FOYERMC sM (1-800-533-6937) (1-888-784-6427) www.sears.ca © Sears, Roebuck and Co. ® Registered Trademark ® Marca Registrada MC Marque / TM Trademark / SMService Mark of Sears, Roebuck / TM Marca de F&brica / SMMarca de Servicio de commerce / MDMarque d6posee de Sears, Roebuck and Co. de Sears, Roebuck and Co. and Co. :::::::::::::::::::i
This document in other languages
- español: Craftsman 580.323300