Download SEFRAM 4451 Specifications

Transcript
Operating Manual
SEFRAM 4451
SETUPS Menu
F1: RECALL
- Recalls a previously stored front-panel setup from the selected buffer. Change
the buffer number by using the rotary input knob. Valid storage buffer numbers
are from 1 to 99.
Buffer 0 is the factory default setup; buffer 99 is the last front panel setup before
power-off.
F2: STORE
- Stores the current front-panel setup to the specified storage buffer. Change the
buffer number by using the data keys or the rotary input knob. Valid storage
buffer numbers range from I to 98.
F4: CLEAR ALL
- Clears all data on all memory settings, after a YES or NO selection message.
3.6.6 UTIL Menu
Utility Menu
F1: GPIB
M4451 A00
-Selects the GPIB remote mode of operation. After selection the GPIB can be set to any
value from 1 to 31 using the rotary knob. The value is kept in a nonvolatile memory and
used at power-on. The factory default address is 10. Setting the address to 31 puts the
device in the off-bus state (it will not respond to messages on the GPIB bus).
29